! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Motion detector, 230 V, Zigbee®, 5 m, 110°, wireless, for surface mounting

The wireless motion detector can be used to control other switching contacts. For example, when motion is detected, you can control the contact of another connectable switch, dimmer or motor control.

Since the motion detector is powered by a button battery and is supplied with a self-adhesive mounting plate, it can be easily attached anywhere. This makes it possible to configure additional functionalities with the Niko Home Control programming software. This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640). This motion detector can be used in combination with the wireless smart hub for Niko Home Control (552-00001).

Product details

This product consists of several components. Below you will find an overview of all the component parts.
Technical datasheets
Technical manuals
End user manuals
Certificaten CE-Marking

Motion detector, 230 V, Zigbee®, 5 m, 110°, wireless, for surface mounting, white

Reference code
552-80401

The wireless motion detector can be used to control other switching contacts. For example, when motion is detected, you can control the contact of another connectable switch, dimmer or motor control.

Since the motion detector is powered by a button battery and is supplied with a self-adhesive mounting plate, it can be easily attached anywhere.

This motion detector can be used in combination with the wireless smart hub for Niko Home Control (552-00001) or with the wireless bridge for Niko Home Control (550-00640) for use in a bus wiring installation. This makes it possible to configure additional functionalities with the Niko Home Control programming software.

Finishing colour: white

Compatible secondary detectors: 552-80401

Specification description

Motion detector, 230 V, Zigbee®, 5 m, 110°, wireless, for surface mounting, white.

  • Maximum range open field (detector to smart hub): 30 m
  • Maximum range indoor (detector to smart hub): 10 m
  • Compatible with the wireless bridge
  • Input voltage: battery CR2450
  • Detection angle: 110°
  • Detection range (PIR): ø 5 m from a height of 2.5 m
  • Ambient temperature: 0 – 40 °C
  • Mounting method: surface mounting
  • Mounting height: 2.5 – 2.8 m
  • Usage: for indoor use only
  • Dimensions (HxWxD): 51 x 51 x 34 mm
  • Weight: 69 g
  • Operating frequency: 2.4 GHz
  • Maximum radio frequency power: 7 dBm
  • System compatibility: talks with Homey (Zigbee®)
  • Modification of settings: Niko Home Control programming software
  • Protection degree: IP20
  • Marking: CE
  • Certification marks: Zigbee Certified Product

Related products

Wireless battery-powered switch, 1-fold, Zigbee®

This onefold wireless battery-powered Zigbee® switch allows you to remotely control wireless Zigbee® devices. It can either be used in your Niko Home Control installation or connected to a third-party Zigbee® network as a standard dimmer switch via Find&Bind pairing. Moreover, the switch can be paired with up to eight Zigbee® receivers for stand-alone use via Touchlink. It is battery-powered with a lifetime of at least five years, based on twenty short-press actuations a day. The wireless Zigbee® switch is mounted on a plastic base. The set (base + switch 552-72001) can be screwed on a wall (screws excluded) or glued to a flat surface with double-sided adhesive tape (included). If you want to install the onefold wireless battery-powered Zigbee® on a flush-mounting box, order the variant without plastic baseplate (552-72011). Combine it with a metal baseplate (552-720X0) instead. The wireless battery-powered switch can be connected wirelessly to the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640).

Wireless smart hub for Niko Home Control

The wireless smart hub for Niko Home Control is the brain of the installation. It allows you to connect all connected devices in your installation to the system. Once you have added them, you can easily control them with your smartphone. With the programming software, you can also add extensive functionalities such as scenes, all-off actions or presence simulation. The smart hub always needs to be used in combination with the Niko Home Control programming software or the Niko Home app.

Connected switching socket outlet for Niko Home Control with pin earthing and shutters, Zigbee®

The connected switching socket outlet communicates wirelessly with the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation with the wireless bridge for Niko Home Control (550-00640). In combination with the smart hub or wireless bridge, it can be connected to a wireless switch without additional wiring. Moreover, the plugged-in device can be linked to handy routines such as an all-off/all-on function or calendar functions and controlled remotely via the Niko Home app. In addition, its built-in consumption measurement helps you to save energy as you can consult the plugged-in device’s energy data via the Niko Home app. Use the connected switching socket outlet within the routines ‘peak mode’ and ‘solar mode’ to optimise your energy production and consumption. Note that it can also be used stand-alone as a conventional socket outlet. It is fitted with a standard built-in overtemperature and overcurrent protection to ensure complete safety.

Favorites ( 0 )