Presence detector, dual tech, PIR+US, 230 V, master, 9.5 m / 19 m, for flush-mounting box
Intelligent presence detector for ceiling mounting in offices. Suitable for switching indoor lighting. Rapid detection of even the slightest movements, thanks to passive infrared (PIR) and ultrasonic (US) technology. Presence detection behind office partitions by means of US detection. Equipped with an integrated light sensor. For surface- or flush mounting.
Product details
Presence detector, dual tech, PIR+US, 230 V, master, 9.5 m / 19 m, for flush-mounting box, white
This (Master) intelligent presence detector is suitable for ceiling mounting in offices. It quickly detects the smallest movements thanks to its passive infrared (PIR) and ultrasonic (US) beams. The device automatically adjusts its sensitivity to the movement registered and also has an integrated light sensor. The detection range is 360°. The detection range can be adjusted using the cover mask. The device has an IP20 protection degree.
Finishing colour: white
Compatible secondary detectors: 350-20066
Specification description
Presence detector, dual tech, PIR+US, 230 V, master, 9.5 m / 19 m, for flush-mounting box, white.
- Factory setting
- light sensitivity: 100 lux
- switch-off delay: 15 min
- detection area (US sensor): 80%, ± 8 x 13 m
- detection method: PIR + US
- air flow sensitivity: off
- function: the presence detector is equipped with an integrated light sensor. The lighting is automatically switched on only when movement is registered in the room and when the measured daylight level is insufficient relative to the preset lux value. The lighting remains switched on as long as the presence detector registers activity in the detection area. If no movement is detected in the room, the lighting is automatically switched off after the switch-off delay has elapsed.
The light sensitivity, the switch-off delay, the detection area, the detection method and the air flow sensitivity can all be set using the potentiometers on the device:
– there are four preset values for the detection area: 2 x 3 m, 4 x 6 m, 6 x 7 m and 10 x 16 m.
– there are four detection methods: PIR/US, only PIR, only US and PIR + US.
– the air flow sensitivity can be switched completely on or off.
– there are four preset indicative values for the light sensitivity: 10 lux, 30 lux, 100 lux and 1000 lux.
– there are four preset times for the switch-off delay: 1 minute, 5 minutes, 15 minutes and 30 minutes.
- Input voltage: 230 Vac ± 10 %, 50 Hz
- Detector output: 230 V (ON/OFF)
- Maximum MCB rating: 10 A (limited by national installation rules)
- Number of channels: 1 channel
- Light intensity range: 10 lux – 2000 lux
- Switch-off delay: 1 min – 30 min
- Detection angle: 360°
- Detection range (PIR): ø 9.5 m from a height of 3 m
- Detection range (US): 12 x 19 m from a height of 3 m
- Ambient temperature: 0 – 45 °C
- Mounting method: flush-mounting box
- Mounting height: 2 – 3 m
- Usage: for indoor use only
- Relay contact: N.O. (max. 10 A), potential-free
- Maximum load incandescent and halogen lamps (cosφ = 1): 2300 W
- Maximum load low voltage halogen lamps: 500 W
- Maximum load economy lamps (CFLi): 350 W
- Maximum load LED lamps 230 V: 350 W
- Maximum capacitive load: 140 µF
- Maximum switching current: 165 A/20 ms – 800 A/200 µs
- Dimensions (HxWxD): 120 x 120 x 60 mm
- Dimensions visible (HxWxD): 120 x 120 x 34 mm
- Protection degree: IP20
- Protection class: Class I device
- Marking: CE
- Certification marks: SundaHus
Accessories
IR remote control
This remote control unit is used to set up the flush-mounting presence detector using infrared signals. It allows the factory settings to be changed, including the daylight factor (lux value), the time period during which the light remains on and the sensitivity of the ultrasonic sensor, among other things.
Compatible articles: 350-20065
Specification description
IR remote control
Flush mounting box with spring clips
Flush-mounting box with spring clips for ceiling mounting of detectors
Compatible articles: 350-20056, 350-20065, 350-20066, 350-20070, 350-20071, 350-41730, 350-41734
Specification description
Flush mounting box with spring clips
Flush-mounting box for ceiling mounting of detectors. Provided with spring clips for easy mounting in false ceilings.
Related products
Presence detector P48MR, DALI-2, master, 12 – 13 m, for flush mounting (SnapFit)
This flat and discrete presence detector is a DALI-2 master for DALI lighting control in up to 4 zones. The detector is fitted with multiple functions and can be controlled wirelessly by push buttons. The SnapFit mounting bracket ensures a quick and stable mounting in all types of suspended ceilings with or without removable tiles. The lighting zones are defined during commissioning, using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector.
Presence detector P48LR, DALI-2, master, 32 – 37 m, for flush mounting (SnapFit)
This presence detector is a DALI-2 master for DALI lighting control in up to 4 zones. The detector is fitted with multiple functions and can be controlled wirelessly using push buttons. The SnapFit mounting bracket ensures a quick and stable mounting in all types of suspended ceilings with or without removable tiles. The lighting zones are defined during commissioning, using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector.
Presence detector P48MR, DALI-2, master, 12 – 13 m, IP54, for surface mounting
This presence detector is a DALI-2 master for DALI lighting control in up to 4 zones. The detector is fitted with multiple functions and can be controlled wirelessly by push buttons. It is designed for surface mounting and has an IP54 protection degree. The lighting zones are defined during commissioning, using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector.
