The built-in sensor in your roof or sliding window allows you to check on your smartphone whether you have closed the window and it closes automatically if it starts to rain. With your smartphone you can open the window remotely to let someone in or out.
Using your touchscreen or smartphone, you can already open up roof windows and let in some fresh air. In the winter, your roll-down shutters and curtains stay open to let in the sun's warmth. And in the summer, they automatically close to keep the heat at bay. That saves you energy. Switching your home to sleep mode? Your curtains will also close automatically.
 |
 |
Connect your windows with Niko Home Control
To control your Niko Home Control partner brand’s windows, curtains and roll-down shutters, you will need a smart device from that particular partner. More information can be found in the technical details.
The connection to such devices can be activated on mynikohomecontrol.niko.eu. Once activated, your Niko Home Control installation will start to communicate with your partner system and you will also be able to create advanced actions.
Niko makes every effort to ensure the connection process runs as smoothly as possible. Due to technical differences between the brands, there may be differences in functions and options. Connection to these partners is only possible when Niko Home Control is installed using bus wiring.
-
You will need the following
- INTEGRA windows and accessories in combination with a VELUX KLF 200 module
- Niko Home Control for bus wiring with programming software version 2.1 onwards
- a Niko Home Control switching module with 2 free outputs for each device you want to connect
- an SVV cable with a minimum of 12 conductors between the cabinet and the KLF 200 module
Conditions
- you can control a maximum of 5 devices or groups per KLF 200 module
- the KLF 200 module is ideally located near your Velux windows
-
Have you chosen electric sliding windows from Reynaers? You can connect them to Niko Home Control using the Reynaers interconnecting module. With the press of a button, you can open or close the windows or put them in a specific position.
You will need the following
- Hi-Finity windows in combination with a Reynaers interconnecting module
- Niko Home Control for bus wiring with programming software version 2.1 onwards
- a Niko Home Control switching module with 2 free outputs per window
- 1 Niko Home Control digital potential-free sensor module to read the feedback
- an SVV cable with a minimum of 5 wires between the switching module and the interconnecting module
- 1 roller blind control per window
How to set up?
Find out what you need and how you can link Niko Home Control with your application
Partners Brochure
Read all about our partners
Online catalogue
Technical product information for professionals
