! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Double socket outlet with pin earthing and shutters, pre-wired, horizontal

For mounting into a double flush-mounting box without dividing wall.

Product details

  • This product consists of several components. Below you will find an overview of all the component parts.

    Base for double horizontal socket outlet with pin earthing and shutters, flush-mounting depth 28.5 mm, plug-in terminals

    Reference code
    170-38715

    Mechanism for a double horizontal socket outlet with pin earthing, screw fixing and shutters. This socket outlet has a flush-mounting depth of 28.5 mm. A finishing set and faceplate in the colour of your choice must be ordered separately.

    This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

    Base for double horizontal socket outlet with pin earthing and shutters, flush-mounting depth 28.5 mm, screw terminals

    Reference code
    170-38701

    Mechanism for a double horizontal socket outlet with pin earthing, screw fixing and shutters. This socket outlet has a flush-mounting depth of 28.5 mm. A finishing set and faceplate in the colour of your choice must be ordered separately.

    This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

    Finishing set for socket outlet with pin earthing and shutters, flush-mounting depth 28.5 mm, cream

    Reference code
    100-66601

    Finishing set for a socket outlet with pin earthing and shutters. Finishing colour: cream. This central plate must be used with a socket outlet with a flush-mounting depth of 28.5 mm. Finishing colour: cream.

    • 100-66601
      Colour cream
      Reference code 100-66601
    • 101-66601
      Colour white
      Reference code 101-66601
    • 102-66601
      Colour light grey
      Reference code 102-66601
    • 121-66601
      Colour sterling coated
      Reference code 121-66601
    • 122-66601
      Colour anthracite coated
      Reference code 122-66601
    • 123-66601
      Colour bronze coated
      Reference code 123-66601
    • 124-66601
      Colour dark brown coated
      Reference code 124-66601
    • 154-66601
      Colour white coated
      Reference code 154-66601
    • 157-66601
      Colour champagne coated
      Reference code 157-66601
    • 161-66601
      Colour black coated
      Reference code 161-66601
    • 200-66601
      Colour piano black coated
      Reference code 200-66601
    • 220-66601
      Colour blue grey coated
      Reference code 220-66601
    • 221-66601
      Colour gold coated
      Reference code 221-66601
  • Niko has already created this product for you. We have combined several articles into one finished product, which is available in different variations.
    Technical datasheets
    Certificates
    Certificaten CE-Marking

    Double horizontal socket outlet with pin earthing, shutters and plug-in terminals, flush-mounting depth of 28.5 mm, incl. faceplate Finishing colour: white

    Reference code
    101-66625

    Compound double socket outlet with pin earthing (base, finishing set and faceplate) for horizontal positioning. The bases are equipped with plug-in terminals and screw fixing. The socket outlet also has shutters and a flush-mounting depth of 28.5 mm. Finishing colour: white

    Specification description

    Double horizontal socket outlet with pin earthing, shutters and plug-in terminals, flush-mounting depth of 28.5 mm, incl. faceplate Finishing colour: white.

    • Protection degree: IP20
    • Protection degree: IP41 for the combination of a mechanism, central plate and faceplate
    • The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
    • Certification marks: CEBEC
    • Marking: CE

    Base for double horizontal socket outlet with pin earthing and shutters, flush-mounting depth 28.5 mm, plug-in terminals.

    • Maximum MCB rating: 16 A (1.5 mm²) / 20 A (2.5 mm²) (limited by national installation rules)
    • Protection degree: The combination of a mechanism, a central plate and a faceplate has a protection degree of IP21-D
    • Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
    • Material base
      • ureumformaldehyde (UF) with high heat resistance
      • white RAL9010 (approximately)
    • Flush-mounting frame
      • 1 mm-thick metal
      • galvanized on all sides after cutting, even on the cut edges
      • with 4 grooves with screw hole of 7 mm
      • with 4 screw holes (indicated by a screw symbol) with a diameter of 3 mm for mounting on panels
    • Required type of flush-mounting box
      • depth: min. 40 mm (cabling space included)
      • claw/screw fixing: 60 mm
      • inner diameter box: 60 mm
      • multiple boxes centre distance horizontal: 71 mm
      • multiple boxes centre distance vertical: 71 mm
      • multiple boxes centre distance vertical: 60 mm for Belgium and France
    • Fixing method
      • easily mounted in a flush-mounting box or in a trunking system with mounting brackets, thanks to:
      • grooves, each with two screw holes of 7 mm on the horizontal axis
      • grooves with one screw hole of 7 mm on the vertical axis
      • mounting with horizontal screws: Position the flush-mounting frame over the screw head of the flush-mounting boxes or mounting brackets, move to the desired position and screw tight.
      • mounting with vertical screws: Position the flush-mounting frame over the screw head of the screws of the flush-mounting boxes and move it to the left.
    • Centre-to-centre distance
      • Simple and quick assembly of one or more mechanisms by the indication (chalk line, laser, etc.) of the centre of the flush-mounting frame
      • vertical coupling centre-to-centre distance 60 mm by sliding several bases into each other, they lock themselves automatically
      • vertical coupling centre-to-centre distance 71 mm using pre-formed lips at the bottom, by folding the lips downwards over a length of 1 mm, the bases support each other and the centre-to-centre distance is guaranteed.
      • horizontal connection of multiple bases is quick and perfect thanks to the folded-up dovetails on the left and right sides
      • extra robustness due to the folded-up edges on the outside of the base and the continuation into the inside of the base
    • End border: 4 rectangular openings (7 x 2.5 mm) which, if the flush-mounting box protrudes from the plasterwork, can compensate for a margin of between 1 and 1.2 mm, so that the faceplate can still butt up perfectly against the wall
    • Wire connection
      • contact buses fitted with plug-in terminals for clamping the wires
    • Wire capacity
      • all connection terminals at the top side of the base
      • up to 2 x 2.5 mm² wire per terminal
    • Stripping length
      • 14 mm stripping length
      • indelibly indicated at the rear side: stripping length
    • Ambient temperature: -5 – +40 °C
    • Certification marks: CEBEC, NF
    • Marking: CE

    Finishing set for socket outlet with pin earthing and shutters, flush-mounting depth 28.5 mm, white. This central plate is surrounded with a flat edge that is equipped at all 4 corners with a rectangular opening, each containing a multi-positional snap hook. The construction of the central plate ensures that the faceplate can always be attached flat to the wall, even in cases of untidy plasterwork. This works in two directions: If the flush-mounting box sticks out of the plasterwork, the multi-positional snap hooks can compensate for a 1 to 1.2 mm margin; if the flush-mounting box is sunk too deeply in the plasterwork, the snap hooks can compensate for up to a 1.8 mm margin. The flat edge around the central plate also has 4 round openings that ensure the correct positioning of the faceplate in relation to the central plate. After mounting all components (faceplate, finishing set and switch), no metal parts are visible thanks to the flat edge of the central plate.

    • Material central plate: The central plate is made of rigid PC and ASA. The base material is coloured in mass.
    • Colour: white (coloured in mass, approximately NCS S 0502 - Y50R, RAL 9010)
    • Dismantling: To dismount simply unscrew the central plate.
    • Shutters: Equipped with shutters. This means that contact is made after simultaneous introduction of the pins of a plug but prevents contact from being made if only 1 pin is introduced or if the two pins are not introduced simultaneously.
    • Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
    • Fire safety
      • The plastic parts of the central plate are self-extinguishing (comply with a filament test of 650°C)
      • The plastic parts of the central plate are halogen-free.
    • Dimensions of finishing with flat edge: 56 x 56 mm (HxW)

    Dimensions of visible area of finishing: 45 x 45 mm (HxW)

    • Dimensions (HxWxD): 55.8 x 55.8 x 25.6 mm
    • Certification marks: CEBEC, NF
    • Marking: CE

    Twofold faceplate with 71 mm centre distance, Niko Original white.

    • Double faceplate for two switches.
    • Colour: white (coloured in mass, approximately NCS S 0502 - Y50R, RAL 9010)
    • Frame composition: It is made of dimensionally stable pc+asa.
    • Centre-to-centre distance: 71 mm
    • Surface-mounting height: max. 8.5 mm
    • Fire safety
      • self-extinguishing: complies with a filament test of 650°C
      • halogen-free
    • Protection degree: IP41 for the combination of a mechanism, central plate and faceplate
    • Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
    • Dimensions (HxWxD): 83 x 154 x 8.9 mm
    • Certification marks: CEBEC, KEMA, NF, VDE, ÖVE, SEMKO
    • Marking: CE
    • 101-66625
      Colour white
      Reference code 101-66625

    Double horizontal socket outlet with pin earthing and shutters, screw terminals, flush-mounting depth of 28.5 mm, incl. faceplate Finishing colour: white

    Reference code
    101-66602

    Compound double socket outlet with pin earthing (base, central plate and finishing set) for horizontal positioning. The bases are equipped with screw terminals and screw fixing. The socket outlet also has shutters and a flush-mounting depth of 28.5 mm. Finishing colour: white

    This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

    • 100-66602
      Colour cream
      Reference code 100-66602
    • 101-66602
      Colour white
      Reference code 101-66602

Related products

Connected switching socket outlet for Niko Home Control with pin earthing and shutters, Zigbee®

The connected switching socket outlet communicates wirelessly with the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation with the wireless bridge for Niko Home Control (550-00640). In combination with the smart hub or wireless bridge, it can be connected to a wireless switch without additional wiring. Moreover, the plugged-in device can be linked to handy routines such as an all-off/all-on function or calendar functions and controlled remotely via the Niko Home app. In addition, its built-in consumption measurement helps you to save energy as you can consult the plugged-in device’s energy data via the Niko Home app. Use the connected switching socket outlet within the routines ‘peak mode’ and ‘solar mode’ to optimise your energy production and consumption. Note that it can also be used stand-alone as a conventional socket outlet. It is fitted with a standard built-in overtemperature and overcurrent protection to ensure complete safety.

Connected switching socket outlet for Niko Home Control with side earthing and shutters, Zigbee®

The connected switching socket outlet communicates wirelessly with the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation with the wireless bridge for Niko Home Control (550-00640). In combination with the smart hub or wireless bridge, it can be connected to a wireless switch without additional wiring. Moreover, the plugged-in device can be linked to handy routines such as an all-off/all-on function or calendar functions and controlled remotely via the Niko Home app. In addition, its built-in consumption measurement helps you to save energy as you can consult the plugged-in device’s energy data via the Niko Home app. Use the connected switching socket outlet within the routines ‘peak mode’ and ‘solar mode’ to optimise your energy production and consumption. Note that it can also be used stand-alone as a conventional socket outlet. It is fitted with a standard built-in overtemperature and overcurrent protection to ensure complete safety.

Digital black, connected customisable control screen, 230 V

The Digital black is a completely customisable touchscreen which has an extremely user-friendly interface with clear symbols. The screen is automatically activated when your hand comes near. When there is no Niko Home Control installation available, the built-in switching contact can be controlled via the touchscreen or an N.O. push-button extension (170-00005). When the connection to a Niko Home Control installation has been made, it becomes possible to switch or dim your lights, set scenes, set ventilation modes, adjust blinds and sunblinds to the desired position, in one operation. In short, all possible types of controls are available in your Niko Home Control installation. Do you have a Niko Home Control thermostat (550-1305X) or an active connection with one of our heating partners? Then you can easily set the temperature with the Digital black. With the corresponding Niko Home app not only can you choose which controls are displayed or where they are displayed on the screen, but also the way you navigate through your control screens. You can download this app for free in the respective app store for your mobile device. The Digital black can be easily mounted in any standard flush-mounting box using the familiar claw or screw fixing and is powered on 230 Vac (L- + N-wire required). This 230 Vac variant is equipped with a switching contact 10 A (resistive), meaning that it can easily be replaced with a conventional single-pole switch. In combination with the wireless smart hub for Niko Home Control (552-00001) and additional controls from the Niko Home Control range for traditional wiring, you can easily add automation to your conventional installation. The screen communicates via your Wi-Fi network with the rest of your Niko Home Control system. You need an active internet connection to activate the Digital black. This internet connection ensures that your Digital black and Niko Home Control installation are always up-to-date and have the most recent functionalities.

Favorites ( 0 )