! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Detectors

Would you like the light to switch on automatically when you arrive home? Are you looking for a daylight solution for office or classroom lighting? Do you want to integrate your lighting system with the building’s HVAC system to save energy?

Niko detectors for intelligent lighting control offer a solution for all the above cases. Well-positioned presence or motion detectors in a room or hallway will instantly improve your comfort, safety, productivity and energy efficiency.

  • Motion detectors: automatically switch the indoor or outdoor lighting on and off when entering a room or certain zone.
  • Presence detectors (daylight control): can adjust the intensity of your indoor lighting according to the amount of daylight entering the room.
  • Twilight switches: automatically switch on the outdoor lighting when it gets dark outside.

Filters

Will the product be used indoors or outdoors?
What should be detected?
Which kind of installation or system will be used?
Which technology should the detector use for sensing?
Dual tech = a combination of passive infrared and ultrasonic PIR = passive infrared
How wide should the detector angle be?
How far should the detection reach?
How will the product be mounted?
Cabinet = in an electrical cabinet / DIN rail Flush mounting = in a suspended ceiling Flush-mounting box = in a flush-mounting box Surface mounting = on the surface of a wall or ceiling
Where should the product be mounted?
How high will the detector be mounted?
How dust- and waterproof should the detector be?
The higher the IP degree, the better the protection. The first digit indicates the level of dust protection, the second digit indicates the level of water protection.

Presence detector P48MR, DALI-2, master, 12 – 13 m, for flush mounting (SnapFit)

This flat and discrete presence detector is a DALI-2 master for DALI lighting control in up to 4 zones. The detector is fitted with multiple functions and can be controlled wirelessly by push buttons. The SnapFit mounting bracket ensures a quick and stable mounting in all types of suspended ceilings with or without removable tiles. The lighting zones are defined during commissioning, using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector.

Presence detector P48LR, DALI-2, master, 32 – 37 m, for flush mounting (SnapFit)

This presence detector is a DALI-2 master for DALI lighting control in up to 4 zones. The detector is fitted with multiple functions and can be controlled wirelessly using push buttons. The SnapFit mounting bracket ensures a quick and stable mounting in all types of suspended ceilings with or without removable tiles. The lighting zones are defined during commissioning, using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector.

Presence detector P48MR, DALI-2, master, 12 – 13 m, IP54, for surface mounting

This presence detector is a DALI-2 master for DALI lighting control in up to 4 zones. The detector is fitted with multiple functions and can be controlled wirelessly by push buttons. It is designed for surface mounting and has an IP54 protection degree. The lighting zones are defined during commissioning, using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector.

Presence detector P48LR, DALI-2, master, 32 – 37 m, IP54, for surface mounting

This presence detector is a DALI-2 master for lighting control in up to 4 zones. The detector is fitted with multiple functions and can be controlled wirelessly using push buttons. It is designed for surface mounting and has an IP54 protection degree. The lighting zones are defined during commissioning using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector.

Motion detector M48HC, DALI-2, master, 18 – 53 m, IP54, for high ceilings, for surface mounting

This high ceiling detector is a DALI-2 master for DALI lighting control in up to 4 zones . The detector is fitted with multiple functions and can be controlled wirelessly using push buttons. It is designed for surface mounting and has an IP54 protection degree. The lighting zones are defined during commissioning, using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector.

Presence detector P47MR, master, 12 – 13 m, for flush mounting (SnapFit)

This flat and discrete presence detector is a DALI-2 master detector for DALI lighting control in up to three daylight zones. The SnapFit mounting bracket ensures a quick and stable mounting in all types of suspended ceilings with or without removable tiles. The lighting zones are defined during commissioning, using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector.

Presence detector P47LR, DALI-2, master, 32 – 37 m, for flush mounting (SnapFit)

This presence detector is a DALI-2 master detector for DALI lighting control in up to three daylight zones. The SnapFit mounting bracket ensures a quick and stable mounting in all types of suspended ceilings with or without removable tiles. The lighting zones are defined during commissioning, using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector.

Presence detector P47MR, DALI-2, master, 12 – 13 m, IP54, for surface mounting

This presence detector is a DALI-2 master detector for DALI lighting control in up to three daylight zones. The detector is designed for surface mounting and has an IP54 protection degree. The lighting zones are defined during commissioning, using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector.

Presence detector P47LR, DALI-2, master, 32 – 37 m, IP54, for surface mounting

This presence detector is a DALI-2 master detector for DALI lighting control in up to three daylight zones. It is designed for surface mounting and has an IP54 protection degree. The lighting zones are defined during commissioning, using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector.

Presence detector P47MR, DALI-2, master, 12 – 13 m, for flush-mounting box

This flat and discrete presence detector is a DALI-2 master detector for DALI lighting control in up to three daylight zones. The detector is specially designed for mounting in a standard flush-mounting box (60 or 79 mm screw distance). The lighting zones are defined during commissioning, using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector.

Presence detector P47LR, DALI-2, master, 32 – 37 m, for flush-mounting box

This presence detector is a DALI-2 master detector for DALI lighting control in up to three daylight zones. The detector is specially designed for mounting in a standard flush-mounting box (60 or 79 mm diagonal screw distance). The lighting zones are defined during commissioning, using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector.

Presence detector P46MR, DALI-2, secondary - BMS, 12 – 13 m, for flush mounting (SnapFit)

This flat and discrete presence detector is a DALI-2 secondary and BMS detector that extends the detection range of a DALI master detector or can be part of a BMS system. The SnapFit mounting bracket ensures a quick and stable mounting in all types of suspended ceilings with or without removable tiles. If the detector is used as a secondary detector and connected to a DALI bus controlled by a DALI master detector, it will start communicating with this master detector without further commissioning. If it is connected to the DALI bus of a BMS system, the detector needs to be commissioned with the BMS software. The detector’s settings can be modified using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector or using the BMS software.

Presence detector P46LR, DALI-2, secondary - BMS, 32 – 37 m, for flush mounting (SnapFit)

This presence detector is a DALI-2 secondary and BMS detector that extends the detection range of a DALI master detector or as part of a BMS system. The SnapFit mounting bracket ensures a quick and stable mounting in all types of suspended ceilings with or without removable tiles. If the detector is used as a secondary detector and connected to a DALI bus controlled by a DALI master detector, it will start communicating with this master detector without further commissioning. If it is connected to the DALI bus of a BMS system, the detector needs to be commissioned with the BMS software. The detector’s settings can be modified using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector or using the BMS software.

Presence detector P46MR, DALI-2, secondary - BMS, 12 – 13 m, IP54, for surface mounting

This flat and discrete presence detector is a DALI-2 secondary and BMS detector that extends the detection range of a DALI master detector or can be part of a BMS system. It is designed for surface mounting and has an IP54 protection degree. If the detector is used as a secondary detector and connected to a DALI bus controlled by a DALI master detector, it will start communicating with this master detector without further commissioning. If it is connected to the DALI bus of a BMS system, the detector needs to be commissioned with the BMS software. The detector’s settings can be modified using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector or using the BMS software.

Presence detector P46LR, DALI-2, secondary - BMS, 32 – 37 m, IP54, for surface mounting

This presence detector is a DALI-2 secondary and BMS detector that extends the detection range of a DALI master detector or as part of a BMS system. It is designed for surface mounting and has an IP54 protection degree. If the secondary detector is connected to a DALI bus with a DALI master, it will start communicating with this master without further commissioning. If it is connected to a DALI bus or a BMS system, the detector needs to be commissioned with the BMS software. The detector’s settings can be modified using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector or using the BMS software.

Presence detector P46MR, DALI-2, secondary - BMS, 12 – 13 m, for flush-mounting box

This flat and discrete presence detector is a DALI-2 secondary and BMS detector that extends the detection range of a DALI master detector or can be part of a BMS system. The detector is specially designed for mounting in a standard flush-mounting box (60 or 79 mm diagonal screw distance). If the detector is used as a secondary detector and connected to a DALI bus controlled by a DALI master detector, it will start communicating with this master detector without further commissioning. If it is connected to a DALI bus or a BMS system, the detector needs to be commissioned with the BMS software. The detector’s settings can be modified using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector or using the BMS software.

Presence detector P46LR, DALI-2, secondary - BMS, 32 – 37 m, for flush-mounting box

This presence detector is a DALI-2 secondary and BMS detector that extends the detection range of a DALI master detector or as part of a BMS system. The detector is specially designed for mounting in a standard flush-mounting box (60 or 79 mm diagonal screw distance). If the detector is used as a secondary detector and connected to a DALI bus controlled by a DALI master detector, it will start communicating with this master detector without further commissioning. If it is connected to the DALI bus of a BMS system, the detector needs to be commissioned with the BMS software. The detector’s settings can be modified using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector or using the BMS software.

Motion detector M46HC, DALI-2, secondary - BMS, 18 – 53 m, IP54, for high ceilings, for surface mounting

This high ceiling detector is a DALI-2 secondary and BMS detector that extends the detection range of a DALI master detector or as part of a BMS system. It is designed for surface mounting and has an IP54 protection degree. If the detector is used as a secondary detector and connected to a DALI bus controlled by a DALI master detector, it will start communicating with this master detector without further commissioning. If it is connected to the DALI bus of a BMS system, the detector needs to be commissioned with the BMS software. The detector’s settings can be modified using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector or using the BMS software.

Presence detector P42MR, 230 V, master, 12 – 13 m, for flush mounting (SnapFit)

This flat and discrete presence detector is a 1-channel master detector for automatic lighting control. The detector is fitted with multiple functions and can be controlled wirelessly by push buttons. The SnapFit mounting bracket ensures a quick and stable mounting in all types of suspended ceilings with or without removable tiles. The detector’s settings can be modified using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector.

Presence detector P42MR, 230 V, master, 2 channels, 12 – 13 m, for flush mounting (SnapFit)

This flat and discrete presence detector is a 2-channel master detector for automatic lighting control. The detector is fitted with multiple functions and can be controlled wirelessly by push buttons. The SnapFit mounting bracket ensures a quick and stable mounting in all types of suspended ceilings with or without removable tiles. The detector’s settings can be modified using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector.

Presence detector P42LR, 230 V, master, 32 – 37 m, for flush mounting (SnapFit)

This presence detector is a 1-channel master detector with a large detection range for automatic lighting control. The detector is fitted with multiple functions and can be controlled wirelessly by push buttons. The SnapFit mounting bracket ensures a quick and stable mounting in all types of suspended ceilings with or without removable tiles. The detector’s settings can be modified using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector.

Presence detector P42LR, 230 V, master, 2 channels, 32 – 37 m, for flush mounting (SnapFit)

This presence detector is a 2-channel master detector with a large detection range for automatic lighting control. The detector is fitted with multiple functions and can be controlled wirelessly by push buttons. The SnapFit mounting bracket ensures a quick and stable mounting in all types of suspended ceilings with or without removable tiles. The detector’s settings can be modified using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector.

Presence detector P42MR, 230 V, master, 12 – 13 m, IP54, for surface mounting

This presence detector is a 1-channel master detector for automatic lighting control. The detector is fitted with multiple functions and can be controlled wirelessly by push buttons. The detector is designed for surface mounting and has an IP54 protection degree. The detector’s settings can be modified using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector.

Presence detector P42MR, 230 V, master, 2 channels, 12 – 13 m, IP54, for surface mounting

This presence detector is a 2-channel master detector for automatic lighting control. The detector is fitted with multiple functions and can be controlled wirelessly by push buttons. It is designed for surface mounting and has an IP54 protection degree. The detector’s settings can be modified using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector.

...