Wireless 2-channel receiver for switching
This 2-channel receiver for DIN-rail mounting is controlled wirelessly via radio frequency. It has two, 16A/230V potential-free contacts and a connection for an external antenna (410-00359).
Each switch output can have 32 transmission codes linked to it.
The receiver can be controlled in on/off, pulse and dead man's switch modes.
The on/off mode also has two timer functions and a logic function.
Product details
Wireless 2-channel receiver for switching
This 2-channel receiver for DIN-rail mounting is controlled wirelessly via radio frequency. It has two potential-free contacts and a connection for an external antenna (410-00359). Each switch output can have 32 transmission codes linked to it. The receiver can be controlled in on/off, pulse and push button modes. The on/off mode also has two timer functions and a logic function.
Specification description
Wireless 2-channel receiver for switching
- DIN dimensions: 2TE
- Input voltage: 230 V AC, 50 Hz
- Output: 2 potential-free contacts 16 A (normally open)
- Operating temperature: -20 °C to +45 °C
- Power consumption in stand-by: 0.4 W max. 1.2 W without load
- Not compatible with the wireless bridge
- Maximum MCB rating: 16 A (limited by national installation rules)
- Communication protocol: Easywave®
- Ambient temperature: -20 – +45 °C
- Protection degree: IP20
- Weight: 108 g
- Dimensions (HxWxD): 89.6 x 34.5 x 62.8 mm
- Marking: CE
Related products
Niko dimmer switch for Hue system
With this wireless and battery-free dimmer switch, you can effortlessly operate Philips Hue lamps. Determine in the Philips Hue app what each button must do (switching on and off, dimming, activating scene settings). No wall breaking or cable installation is needed. The dimmer switch can be mounted on a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included). Please note that Philips Hue Bridge v2 is required and not included.
Niko dimmer switch, KNX®
This wireless and battery-free dimmer switch in Niko design can operate as a switch, a dimmer, a roller shutter control or a scene selector in a KNX® system. This dimmer switch works together with the KNX® wireless media coupler (360-33001) who transmits the KNX® commands to the KNX® bus. This allows you to easily extend a KNX® system without breaking walls or installing extra cables. For best performance, follow the installation and radio planning guidelines. Configure the dimmer switch buttons with the ETS software that is available on the KNX® Association website together with the KNX® programming adapter (360-39001). The following communication objects can be linked to the buttons: single channel, dimming and shutter control. The supported functions are: on, off, toggle, up, down, darker, brighter, scene number, send value in percentage, in angle, in 2 bits, in 8 bits. Up to six button combinations can be configured. The dimmer switch can be mounted into a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive tape (included). The central plate and the faceplate must be ordered separately. The dimmer switch combines with any Niko Pure, Niko Intense and Niko Original faceplate in the colour of your choice.
Niko dimmer switch, Bluetooth®
With this wireless and battery-free dimmer switch in Niko design, you can remotely operate Bluetooth® low energy 2,4 GHz wireless receivers that are located in the same room. Examples are Niko presence and motion detectors with a Bluetooth® interface (P48 and M48 series) or smart lighting with integrated Bluetooth® technology from Casambi® of Xicato®. For best performance, follow the installation and radio planning guidelines. Configure the dimmer switch buttons with the respective smart lighting smartphone app or software app (e.g. Niko detector tool app, Casambi app, Xicato Control Software, SylSmart Standalone app, ... ). Up to four buttons can be configured. No wall breaking or cable installation is needed. The dimmer switch can be mounted in a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive tape (included). The central plate and faceplate must be ordered separately. The dimmer switch combines with any Niko Pure, Niko Intense and Niko Original faceplate in the colour of your choice.
