Niko dimmer switch for Hue system
With this wireless and battery-free dimmer switch, you can effortlessly operate Philips Hue lamps. Determine in the Philips Hue app what each button must do (switching on and off, dimming, activating scene settings). No wall breaking or cable installation is needed. The dimmer switch can be mounted on a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included). Please note that Philips Hue Bridge v2 is required and not included.
Product details
-
This product consists of several components. Below you will find an overview of all the component parts.Technical datasheetsTechnical manualsCertificaten CE-Marking
Niko dimmer switch for Hue system
Reference code360-51001With this wireless and battery-free dimmer switch, you can effortlessly operate Philips Hue lamps. Determine in the Philips Hue app what each button must do (switching on and off, dimming, activating scene settings). No wall breaking or cable installation is needed. The dimmer switch can be mounted in a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included). The central plate and faceplate must be ordered separately. The dimmer switch combines with any Niko Pure, Niko Intense and Niko Original faceplate in the colour of your choice. Philips Hue Bridge v2 not required and not included.
Specification description
Niko dimmer switch for Hue system.
- Power supply: integrated kinetic energy Harvester
- Modulation: Shift Keying (OQPSK)
- Maximum RF power: 7 dBm / 5 mW
- Data rate: 250 kbps
- Configuration: Philips Hue app
- Mounting height: 110 cm
- Maximum range (indoor): up to 20 m
- Antenna: integrated antenna
- Marked: CE
- Communication protocol: Zigbee® Green Power
- Operating frequency: 2.4 GHz
- Protection degree: IP20
- Ambient temperature: -25 – +65 °C
- Dimensions (HxWxD): 83 x 83 x 15 mm
- Weight: 25 g
- Marking: CE
Base for a wireless dimmer switch, 60 x 71 mm, claw fixing
Reference code360-00000Base with claw fixing for mounting a wireless dimmer switch (for Hue system, EnOcean®, Bluetooth® and KNX®). You can click it together and combine it with one or more flush-mounting mechanisms from Niko.
Base for a wireless dimmer switch, 60 x 71 mm, screw fixing
Reference code360-00001Base with screw fixing for mounting a wireless dimmer switch (for Hue system, EnOcean®, Bluetooth® and KNX®). You can click it together and combine it with one or more flush-mounting mechanisms from Niko.
Base for a wireless dimmer switch, 71 x 71 mm, claw fixing
Reference code360-00002Base with claw fixing for mounting a wireless dimmer switch (for Hue system, EnOcean®, Bluetooth® and KNX®). You can click it together and combine it with one or more flush-mounting mechanisms from Niko.
Base for a wireless dimmer switch, 71 x 71 mm, screw fixing
Reference code360-00003Base with screw fixing for mounting a wireless dimmer switch (for Hue system, EnOcean®, Bluetooth® and KNX®). You can click it together and combine it with one or more flush-mounting mechanisms from Niko.
Double key, for wireless dimmer switch (Hue®, Bluetooth®, EnOcean®, KNX®), cream
Reference code100-00060This double key with two control buttons can be used for the wireless Niko dimmer switch for Hue system, EnOcean®, Bluetooth® and KNX®.
Conveniently control various lighting points.
-
Niko has already created this product for you. We have combined several articles into one finished product, which is available in different variations.
Niko dimmer switch for Hue system, Niko Original cream
Reference code100-91004With this wireless and battery-free dimmer switch, you can operate the Philips Hue lamps effortlessly. Determine in the Philips Hue app what each button must do (switching on and off, dimming, activating scene settings). Mechanism including push button and faceplate Niko Original cream. Philips Hue Bridge v2 required and not included.
Related products
Niko dimmer switch, KNX®
This wireless and battery-free dimmer switch in Niko design can operate as a switch, a dimmer, a roller shutter control or a scene selector in a KNX® system. This dimmer switch works together with the KNX® wireless media coupler (360-33001) who transmits the KNX® commands to the KNX® bus. This allows you to easily extend a KNX® system without breaking walls or installing extra cables. For best performance, follow the installation and radio planning guidelines. Configure the dimmer switch buttons with the ETS software that is available on the KNX® Association website together with the KNX® programming adapter (360-39001). The following communication objects can be linked to the buttons: single channel, dimming and shutter control. The supported functions are: on, off, toggle, up, down, darker, brighter, scene number, send value in percentage, in angle, in 2 bits, in 8 bits. Up to six button combinations can be configured. The dimmer switch can be mounted into a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive tape (included). The central plate and the faceplate must be ordered separately. The dimmer switch combines with any Niko Pure, Niko Intense and Niko Original faceplate in the colour of your choice.
Niko dimmer switch, Bluetooth®
With this wireless and battery-free dimmer switch in Niko design, you can remotely operate Bluetooth® low energy 2,4 GHz wireless receivers that are located in the same room. Examples are Niko presence and motion detectors with a Bluetooth® interface (P48 and M48 series) or smart lighting with integrated Bluetooth® technology from Casambi® of Xicato®. For best performance, follow the installation and radio planning guidelines. Configure the dimmer switch buttons with the respective smart lighting smartphone app or software app (e.g. Niko detector tool app, Casambi app, Xicato Control Software, SylSmart Standalone app, ... ). Up to four buttons can be configured. No wall breaking or cable installation is needed. The dimmer switch can be mounted in a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive tape (included). The central plate and faceplate must be ordered separately. The dimmer switch combines with any Niko Pure, Niko Intense and Niko Original faceplate in the colour of your choice.
Niko dimmer switch, EnOcean®
With this wireless and battery-free dimmer switch in Niko design, you can remotely operate EnOcean® certified 868 MHz wireless receivers. Examples are Niko presence detectors with an EnOcean® interface (350-41680, 350-41780, 350-41781). No wall breaking or cable installation is needed. For best performance, follow the installation and radio planning guidelines. The pairing procedure with a wireless receiver determines the function of each button. Up to four buttons can be configured. The dimmer switch can be mounted in a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included). The central plate and the faceplate must be ordered separately. The dimmer switch combines with any Niko Pure, Niko Intense and Niko Original faceplate in the colour of your choice.