! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Niko dimmer switch, EnOcean®

With this wireless and battery-free dimmer switch in Niko design, you can remotely operate EnOcean® certified wireless receivers (e.g. presence detectors with EnOcean® interface). No wall breaking or cable installation is needed. The pairing procedure with a wireless receiver determines the function of each button. Up to four buttons can be configured. The dimmer switch can be mounted in a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included).

Product details

This product consists of several components. Below you will find an overview of all the component parts.

Niko dimmer switch, EnOcean®

Reference code
360-11001

With this wireless and battery-free dimmer switch in Niko design, you can remotely operate EnOcean® certified 868 MHz wireless receivers. Examples are Niko presence detectors with an EnOcean® interface (350-41680, 350-41780, 350-41781). No wall breaking or cable installation is needed. For best performance, follow the installation and radio planning guidelines. The pairing procedure with a wireless receiver determines the function of each button. Up to four buttons can be configured. The dimmer switch can be mounted in a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included). The central plate and the faceplate must be ordered separately. The dimmer switch combines with any Niko Pure, Niko Intense and Niko Original faceplate in the colour of your choice.

Specification description

Niko dimmer switch, EnOcean®.

  • Dimensions (HxWxD): 83 x 83 x 15 mm
  • Power supply: integrated kinetic energy Harvester
  • Modulation: Amplitude-shift keying (ASK)
  • Data rate: 125 kbps
  • Configuration: Special Button Combinations (SBC) NFC forum type 2 tag
  • Mounting height: 110 cm
  • Maximum range (indoor): up to 30 m
  • Antenna: integrated antenna
  • Protection degree: IP20
  • Number of control buttons: The base of the fourfold potential-free push button is made of polycarbonate. In addition to the 4 control buttons (upper left and right and lower left and right), the mechanism is equipped in the middle on the front with snap hooks which hold the two keys and a finishing plate (with or without text field) in place.
  • Communication protocol: EnOcean®
  • Maximum radio frequency power: 5 dBm
  • Operating frequency: 0.8683 GHz
  • Fixing method

screw fixing or gluing

  • Ambient temperature: -25 – +65 °C
  • Weight: 25 g
  • Marking: CE

Base for a wireless dimmer switch, 60 x 71 mm, claw fixing

Reference code
360-00000

Base with claw fixing for mounting a wireless dimmer switch (for Hue system, EnOcean®, Bluetooth® and KNX®). You can click it together and combine it with one or more flush-mounting mechanisms from Niko.

This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

Base for a wireless dimmer switch, 60 x 71 mm, screw fixing

Reference code
360-00001

Base with screw fixing for mounting a wireless dimmer switch (for Hue system, EnOcean®, Bluetooth® and KNX®). You can click it together and combine it with one or more flush-mounting mechanisms from Niko.

This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

Base for a wireless dimmer switch, 71 x 71 mm, claw fixing

Reference code
360-00002

Base with claw fixing for mounting a wireless dimmer switch (for Hue system, EnOcean®, Bluetooth® and KNX®). You can click it together and combine it with one or more flush-mounting mechanisms from Niko.

This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

Base for a wireless dimmer switch, 71 x 71 mm, screw fixing

Reference code
360-00003

Base with screw fixing for mounting a wireless dimmer switch (for Hue system, EnOcean®, Bluetooth® and KNX®). You can click it together and combine it with one or more flush-mounting mechanisms from Niko.

This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

Double key, for wireless dimmer switch (Hue®, Bluetooth®, EnOcean®, KNX®), cream

Reference code
100-00060

This double key with two control buttons can be used for the wireless Niko dimmer switch for Hue system, EnOcean®, Bluetooth® and KNX®.

Conveniently control various lighting points.

  • 100-00060
    Colour cream
    Reference code 100-00060
  • 101-00060
    Colour white
    Reference code 101-00060
  • 102-00060
    Colour light grey
    Reference code 102-00060
  • 121-00060
    Colour sterling coated
    Reference code 121-00060
  • 122-00060
    Colour anthracite coated
    Reference code 122-00060
  • 123-00060
    Colour bronze coated
    Reference code 123-00060
  • 124-00060
    Colour dark brown coated
    Reference code 124-00060
  • 154-00060
    Colour white coated
    Reference code 154-00060
  • 157-00060
    Colour champagne coated
    Reference code 157-00060
  • 161-00060
    Colour black coated
    Reference code 161-00060
  • 200-00060
    Colour piano black coated
    Reference code 200-00060
  • 220-00060
    Colour blue grey coated
    Reference code 220-00060
  • 221-00060
    Colour gold coated
    Reference code 221-00060

Related products

Niko dimmer switch for Hue system

With this wireless and battery-free dimmer switch, you can effortlessly operate Philips Hue lamps. Determine in the Philips Hue app what each button must do (switching on and off, dimming, activating scene settings). No wall breaking or cable installation is needed. The dimmer switch can be mounted on a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included). Please note that Philips Hue Bridge v2 is required and not included.

Niko dimmer switch, KNX®

This wireless and battery-free dimmer switch in Niko design can operate as a switch, a dimmer, a roller shutter control or a scene selector in a KNX® system. This dimmer switch works together with the KNX® wireless media coupler (360-33001) who transmits the KNX® commands to the KNX® bus. This allows you to easily extend a KNX® system without breaking walls or installing extra cables. Configure the dimmer switch buttons with the ETS software that is available on the KNX® Association website together with the KNX® programming adapter (360-39001). The following communication objects can be linked to the buttons: single channel, dimming and shutter control. The supported functions are: on, off, toggle, up, down, darker, brighter, scene number, send value in percentage, in angle, in 2 bits, in 8 bits. Up to six button combinations can be configured. The dimmer switch can be mounted into a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive tape (included).

Smart single switch with push button and RF extensions, 10 A

The smart switch has a switching contact to switch lighting on and off. It has a transmitter and receiver operating according to the Easywave protocol. If desired, extra controls can be added. These could be both classic wired push buttons and wireless controls according to the Easywave protocol. By doing so, it can effortlessly replace any traditional single, multiway, or intermediate switching. This makes the smart switch especially suitable for renovation projects or listed building interiors in which drilling or channelling work should be avoided. Please note, the only condition for the use of the smart switch is the presence of the neutral conductor in the flush-mounting box where the smart switch will be placed. Besides being able to switch its own contact, the smart switch is also able to switch other receivers operating according to the Easywave protocol. This function can also be incorporated in a scene setting/preset. In doing so, you can switch all lighting included in the scene setting/preset with one push of the button. It is fitted with a feedback LED of which the behaviour can be adapted to the needs of the user.

Favorites ( 0 )