Niko Home Control touchscreen

This touchscreen does not support access control. To be able to use access control with the Niko Home Control installation, use touchscreen 2 (550-20101). This touchscreen allows you to conveniently operate the entire Niko Home Control installation from one central point. The touchscreen also provides information about energy consumption and the status of the installation. Only one flush-mounting box is needed to mount this touchscreen. The PoE power supply is available separately.

Niko Home Control touchscreen. The Niko Home Control touchscreen offers residents a user-friendly interface to operate all functions within their Niko Home Control installation. The symbol displayed next to each action represents the current status of that action. In addition, the touchscreen provides a detailed overview of the electricity, gas and water consumption in the home, provided that these functions have been included in the installation. The symbols on the touchscreen are used by the resident to operate the functions that you assigned while programming the installation. The resident can also use the touchscreen to request more information about the electricity, gas and water consumption in the home. The Niko Home Control installation must be fitted with an IP interface to enable communication with the touchscreen. The touchscreen can be connected to the IP interface either directly or via the home network. Ensure that the touchscreen is on the same network as the IP interface. Use a twisted pair cable, such as a UTP, FTP or STP cable. Both the touchscreen and the IP interface have an RJ45 jack. You will need to mount RJ45 plugs onto the cable to be able to connect one end of the cable to the IP interface, and the other end to the touchscreen. The touchscreen can be supplied with power using Power over Ethernet (PoE) via the same twisted pair cable, for which you use the Niko PoE power supply (550-00501). Alternatively, you can provide a separate power supply cable, which you connect to a separate 24 V DC power supply module in the electrical cabinet. In that case, you will need a 24 V power supply cable such as an SVV, JYSTY, TPVF or UTP cable in addition to the twisted pair cable. The touchscreen itself is not suitable for flush mounting. Mount the touchscreen onto the wall using a standard flush-mounting box with a depth of at least 40 mm.

Technical data:

• ethernet connection speed: 10 - 100 Mbit/s
• conforms to EN60950-1 + A11
• Screen size: 7"
• Screen resolution: 800 x 480
• Minimum ambient temperature: -5 °C
• Maximum ambient temperature: +40 °C
• Ambient temperature during storage and transport: -10 °C to + 65 °C
• Input voltage: 24 V DC (± 10 %) (SVV, JYSTY, TPVF, UTP, etc.) or Power over Ethernet (PoE) (UTP, STP, FTP) (48 V DC)
• Marking: CE