Base for wireless switch with 8 control buttons.,

With this wireless switch, you control a maximum of 8 circuits, independent of one another, but dependent on the receiver settings. You use the switch for 1-key, 2-key and 4-key functions.

In combination with the “Niko connected switch” gateway only dual-button control is used.

Technical characteristics:

• power supply voltage: battery, 3 V DC (supplied);
• transmission range: approximately 30 meters indoors, 100 meters in open spaces;
• mounting: with adhesive strips (included), screws (not included) or (option) with a metal base on a standard flush-mounting box
• frequenty band: 868,0 – 868,6MHz
• maximum power output: -5,38 dBm

Base for wireless switch with 8 control buttons.,.

Wall-mounted transmitter with 8 connections with RF technology for wireless remote control of Niko RF receivers on the frequency 868.3MHz. Each transmitter can control an unlimited number of receivers. Each receiver can be controlled by a maximum of 32 transmitters. Control via small round buttons. Minimum transmission range in a building: 30m; in open spaces: 100m. Modulation type: FSK. Supplied complete with battery and pre-programmed transmitter address. Buttons and faceplates are to be ordered separately. Battery type: Renata 3V/270mAh CR2430; Saft 3V/270mAh LM2430; Varta 3V/260mAh CR2430; Panasonic 3V/250mAh CR2330. Can be either stuck or screwed to the wall or flush-mounting box. In compliance with Belgian and European legislation: CE marking on the device. Complies with the EN60669-2-1 standard, the EC legislation and meets the essential requirements of the R&TTE Directive 1999/5/EC. Can be used in all European Member States. Dutch user manual is included.

• Communication protocol: Easywave
• Maximum radio frequency power: -5.38 dBm
• Operating frequency: 0.8683 GHz
• Fixing method

screw fixing or gluing

• Marking: CE