Orientation lighting with RGB LEDs for Nikobus

Switch for orientation lighting with RGB LEDs, with claw fixing. This orientation lighting can be directly connected to Nikobus. It has 15 modes that can be programmed using the Nikobus software. A faceplate in the colour of your choice must be ordered separately.

This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

Orientation lighting with RGB LEDs for Nikobus.

• Function: There are 15 application modes (e.g. dimming on/off, changing colour, setting brightness, ..). Using the factory settings, it is possible to manually program a 4-key control for RGB colour and brightness. For the other settings, the Nikobus software is required. Via that same Nikobus software, several orientation LEDs can also be arranged in a master/secondary configuration for reacting synchronously to one and the same command. There is a maximum of 4 masters per installation and 8 secondary LEDs per master. This Nikobus orientation lighting unit consists of a module of 45 x 45 x 32 mm (WxHxD) that is clicked into a 45 x 45 mm, metal flush-mounting frame. The lighting module is made of white, translucent polycarbonate. The colours are produced by LEDs (class T or S) with a very low power consumption. They are shockproof and do not radiate any heat. The LEDs have a life span of more than 60,000 burning hours. The orientation lighting unit does not require extra plasterwork since it is mounted very easily in all existing flush-mounting boxes. This orientation lighting unit works on a voltage of 12-24 V. This product can be provided with an emergency battery with ref. 170-38020 (NiMH, to be ordered separately). In case of a power cut, the integrated emergency battery takes over the power supply for 15 min.
• LED colour: RGB
• Fire safety
  • All plastic components are self-extinguishing (comply with a filament test of 650°C) and are halogen-free.
• Power consumption: 0,6 W
• Flush-mounting frame
  • 1 mm-thick metal
  • galvanized on all sides after cutting, even on the cut edges
  • with 4 grooves with screw hole of 7 mm
  • with 4 screw holes (indicated by a screw symbol) with a diameter of 3 mm for mounting on panels
• Fixing method
  • simple mounting in a flush-mounting box with grip surfaces
  • with claws that rotate open using screws with a combination screwhead (Pz1 or slot 1 x 5 mm), for mounting in a flush-mounting box with grip surfaces
  • engagement depth of claws: 31 mm
  • claws can be pushed back into their original position
  • claws can be easily pushed out using a screwdriver
• Centre-to-centre distance
  • Simple and quick assembly of one or more mechanisms by the indication (chalk line, laser, etc.) of the centre of the flush-mounting frame
  • vertical coupling centre-to-centre distance 60 mm by sliding several bases into each other, they lock themselves automatically
  • vertical coupling centre-to-centre distance 71 mm using pre-formed lips at the bottom, by folding the lips downwards over a length of 1 mm, the bases support each other and the centre-to-centre distance is guaranteed.
  • horizontal connection of multiple bases is quick and perfect thanks to the folded-up dovetails on the left and right sides
  • extra robustness due to the folded-up edges on the outside of the base and the continuation into the inside of the base
• End border: The flush-mounting frame is equipped, both on the top and the bottom, with a dark grey, plastic end border. This border is made of PC+ASA and is joined to the flush-mounting frame using a melting process. The corners of the two end borders are equipped with rectangular openings (7.9 x 1.5 mm) each containing a multi-positional snap hook. Thanks to the snap hooks, the 4 rectangular openings ensure that the faceplate can always be attached flat to the wall, even in cases of untidy plasterwork. This works in two directions: If the flush-mounting box sticks out of the plasterwork, the multi-positional snap hooks can compensate for a 1 to 1.2 mm margin; if the flush-mounting box is sunk too deeply in the plasterwork, the snap hooks can compensate for up to a 1.8 mm margin. The end borders also have 4 round openings that ensure the correct positioning of the faceplate in relation to the central plate.
• Wire connection
  • contact buses fitted with plug-in terminals for clamping the wires
• Dimensions (HxWxD): 71 x 73 mm
• Marking: CE