Wireless RGB(W)-wall control RF, dark brown coated

The wireless RGB(W) wall control, (without wiring between the control points) operates the RGB(W) controller RF (340-00120) and the RGB(W) controller RF + Wi-Fi (340-00121). An RGB(W) controller can be operated by a maximum of ten wireless RGB(W) wall controls. You connect a maximum of one master and nine secondary detectors to one wall control." Besides switching ON/OFF you can also dim, set a colour preference in preset, select a particular colour, activate an automatic colour loop, and determine the loop speed from 10 sec. to 1 hr.

• frequenty band: 868,0 – 868,6MHz
• maximum power output: -7,45 dBm

Wireless RGB(W)-wall control RF, dark brown coated.

• Function
  • The wireless RGB(W) wall control (without wiring between the control points) operates the RGB(W) controller RF (340-00120) and the RGB(W) controller RF + Wi-Fi (340-00121). An RGB(W) controller can be operated by a maximum of ten wireless RGB(W) wall controls. Each RGB(W) wall control can operate a maximum of ten RGB(W) controllers simultaneously. In this case, you must set the controllers in a master-secondary configuration (see chapter 4) so that all lighting reacts completely synchronously. You connect a maximum of one master and nine secondary controllers to one wall control
  • Modes: besides switching ON/OFF you can also dim, set a colour preference in preset, select a particular colour, activate an automatic colour loop, and determine the loop speed from 10 sec. to 1 hr
  • The product is part of a radio frequency (RF) system, a wireless installation technique between the push buttons (control points) and the controller(s) to be operated. The remote or wireless wall control operates on the basis of signal transmission via radio waves at a frequency of 868 MHz. Only products that do not continuously transmit are permitted at this frequency. As a result, the chance of interference is minimal. The wireless system is therefore excellently suited to specific applications, such as the renovation of classified interiors and the expansion of existing electrical installations (where drilling or channelling is not possible). The operation of devices with a remote control, such as a TV or video and audio devices, is not disrupted by the RGB(W) wall control. The indoor range is ± 30 m. In open spaces the range reaches 100 m. The transmission range of the RGB(W) wall control depends on the materials used in the residence
• Material central plate: The central plate is enamelled and made of rigid PC and ASA.
• Print: The wireless RGB(W) wall control (without wiring between the control points) operates the RGB(W) controller RF (340-00120) and the RGB(W) controller RF + Wi-Fi (340-00121). An RGB(W) controller can be operated by a maximum of ten wireless RGB(W) wall controls. Each RGB(W) wall control can operate a maximum of ten RGB(W) controllers simultaneously. In this case, you must set the controllers in a master-secondary configuration (see chapter 4) so that all lighting reacts completely synchronously. You connect a maximum of one master and nine secondary controllers to one wall control." Modes; besides switching ON/OFF you can also dim, set a colour preference in preset, select a particular colour, activate an automatic colour loop, and determine the loop speed from 10 sec. to 1 hr. The product is part of a radio frequency (RF) system, a wireless installation technique between the push buttons (control points) and the controller(s) to be operated. The remote or wireless wall control operates on the basis of signal transmission via radio waves at a frequency of 868 MHz. Only products that do not continuously transmit are permitted at this frequency. As a result, the chance of interference is minimal. The wireless system is therefore excellently suited to specific applications, such as the renovation of classified interiors and the expansion of existing electrical installations (where drilling or channelling is not possible). The operation of devices with a remote control, such as a TV or video and audio devices, is not disrupted by the RGB(W) wall control. The indoor range is ± 30 m. In open spaces the range reaches 100 m. The transmission range of the RGB(W) wall control depends on the materials used in the residence.
• Fire safety
  • the plastic parts of the central plate are self-extinguishing (comply with a filament test of 650 °C)
  • the plastic parts of the central plate are halogen-free
• Dismantling: To dismount simply pull the central plate off the base.
• Marking: CE