! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Wireless media coupler, KNX®

This wireless KNX® media coupler allows you to easily extend a KNX® system using one or more battery-free Niko dimmer switches KNX® (360-31001). The KNX® wireless media coupler is connected to and powered by the KNX® bus. It is configured via the ETS software that is available on the KNX® Association website.

Product details

This product consists of several components. Below you will find an overview of all the component parts.

Wireless media coupler, KNX®

Reference code
360-33001

This wireless KNX® media coupler allows you to easily extend a KNX® system using one or more battery-free Niko dimmer switches KNX® (360-31001). The wireless media coupler is connected to and powered by the KNX® bus. It is configured via the ETS software that is available on the KNX® Association website.

Specification description

Wireless media coupler, KNX®

  • dimensions (WxHxD): 40 x 43 x 11 mm (excl. antenna)
  • power supply: KNX bus cable, 21 to 30 V DC
  • power consumption: < 10 mA
  • RF Protocol: KNX® RF1.R S-Mode
  • modulation: Frequency-Shift Keying (FSK) / up to 16.384 kbps
  • maximum APDU length: 201 bytes
  • temperature (operating / storage): -5 up to +45 °C / -10 up to +70 °C
  • bandwidth: 600 kHz
  • antenna: External antenna
  • maximum range (indoor from switch to receiver): up to 30 m
  • maximum RF power: +10 dBm / 10 mW
  • Communication protocol: KNX®-RF
  • Maximum radio frequency power: 868.3 dBm
  • Ambient temperature: -5 – +45 °C
  • Protection degree: IP20
  • Weight: 15 g
  • Marking: CE

Related products

Niko dimmer switch for Hue system

With this wireless and battery-free dimmer switch, you can effortlessly operate Philips Hue lamps. Determine in the Philips Hue app what each button must do (switching on and off, dimming, activating scene settings). No wall breaking or cable installation is needed. The dimmer switch can be mounted on a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included). Please note that Philips Hue Bridge v2 is required and not included.

Wireless switch with two buttons

This wireless switch with two buttons can be used by a wireless receiver from the Easywave range. It can be used as one dual-button control (upper=on, lower=off), or as two one-button controls (toggle on/off or pulse). The switch can also be used in the Niko Home Control installation for bus wiring in combination with the USB RF interface Easywave (410-00099) for Niko Home Control or in the Niko Home Control installation for traditional wiring in combination with the wireless smart hub (552-00001).

Wireless switch with four buttons

This wireless switch with four buttons can be used by a smart switch or a wireless receiver. It can be used as a two dual-button controls (upper:on, lower off) or as four one-button controls (on/off or pulse). The switch can also be used in the Niko Home Control installation for bus wiring in combination with the USB RF interface Easywave (410-00099) for Niko Home Control or in the Niko Home Control installation for traditional wiring in combination with the wireless smart hub (552-00001).

Favorites ( 0 )