! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Smart double switch with push button and RF extensions, 2 x 10 A

The smart switch has two switching contacts of 10 A each (in total max 16 A) to switch lighting on and off. It has a transmitter and receiver operating according to the Easywave protocol. If desired, extra controls can be added. These could be both classic wired push buttons and wireless controls according to the Easywave protocol. By doing so, it can effortlessly replace any traditional single, multiway, or intermediate switching. This makes the smart switch especially suitable for renovation projects or listed building interiors in which drilling or channelling work should be avoided. Please note, the only condition for the use of the smart switch is the presence of the neutral conductor in the flush-mounting box where the smart switch will be placed.

Besides being able to switch its own contact, the smart switch is also able to switch other receivers operating according to the Easywave protocol.

This function can also be incorporated in a scene setting/preset. In doing so, you can switch all lighting included in the scene setting/preset with one push of the button. It is fitted with a feedback LED of which the behaviour can be adapted to the needs of the user.

Product details

This product consists of several components. Below you will find an overview of all the component parts.

Smart double switch, claw fixing

Reference code
410-00200

Mechanism for a smart double switch, with claw fixing. A finishing set and faceplate in the colour of your choice must be ordered separately.

Smart double switch, screw fixing

Reference code
410-00210

Mechanism for a smart double switch, with screw fixing. A finishing set and faceplate in the colour of your choice must be ordered separately.

Finishing set with lens for double electronic switch or push button, cream

Reference code
100-32004

Finishing set with lens for double electronic switch or push button, cream

  • 100-32004
    Colour cream
    Reference code 100-32004
  • 101-32004
    Colour white
    Reference code 101-32004
  • 102-32004
    Colour light grey
    Reference code 102-32004
  • 104-32004
    Colour greige
    Reference code 104-32004
  • 121-32004
    Colour sterling
    Reference code 121-32004
  • 122-32004
    Colour anthracite
    Reference code 122-32004
  • 123-32004
    Colour bronze
    Reference code 123-32004
  • 124-32004
    Colour dark brown
    Reference code 124-32004
  • 154-32004
    Colour white coated
    Reference code 154-32004
  • 157-32004
    Colour champagne coated
    Reference code 157-32004
  • 161-32004
    Colour black coated
    Reference code 161-32004
  • 200-32004
    Colour piano black coated
    Reference code 200-32004
  • 220-32004
    Colour steel grey coated
    Reference code 220-32004
  • 221-32004
    Colour gold coated
    Reference code 221-32004

Finishing set for double electronic switch or push button, cream

Reference code
100-31004

Finishing set for double electronic switch or push button, cream

  • 100-31004
    Colour cream
    Reference code 100-31004
  • 101-31004
    Colour white
    Reference code 101-31004
  • 102-31004
    Colour light grey
    Reference code 102-31004
  • 104-31004
    Colour greige
    Reference code 104-31004
  • 121-31004
    Colour sterling
    Reference code 121-31004
  • 122-31004
    Colour anthracite
    Reference code 122-31004
  • 123-31004
    Colour bronze
    Reference code 123-31004
  • 124-31004
    Colour dark brown
    Reference code 124-31004
  • 154-31004
    Colour white coated
    Reference code 154-31004
  • 157-31004
    Colour champagne coated
    Reference code 157-31004
  • 161-31004
    Colour black coated
    Reference code 161-31004
  • 200-31004
    Colour piano black coated
    Reference code 200-31004
  • 220-31004
    Colour steel grey coated
    Reference code 220-31004
  • 221-31004
    Colour gold coated
    Reference code 221-31004

Related products

Niko dimmer switch for Hue system

With this wireless and battery-free dimmer switch, you can effortlessly operate Philips Hue lamps. Determine in the Philips Hue app what each button must do (switching on and off, dimming, activating scene settings). No wall breaking or cable installation is needed. The dimmer switch can be mounted on a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included). Please note that Philips Hue Bridge v2 is required and not included.

Niko dimmer switch, Bluetooth®

With this wireless and battery-free dimmer switch in Niko design, you can remotely operate Bluetooth® low energy 2,4 GHz wireless receivers that are located in the same room. Examples are Niko presence and motion detectors with a Bluetooth® interface (P48 and M48 series) or smart lighting with integrated Bluetooth® technology from Casambi® of Xicato®. For best performance, follow the installation and radio planning guidelines. Configure the dimmer switch buttons with the respective smart lighting smartphone app or software app (e.g. Niko detector tool app, Casambi app, Xicato Control Software, SylSmart Standalone app, ... ). Up to four buttons can be configured. No wall breaking or cable installation is needed. The dimmer switch can be mounted in a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive tape (included). The central plate and faceplate must be ordered separately. The dimmer switch combines with any Niko Pure, Niko Intense and Niko Original faceplate in the colour of your choice.

Niko dimmer switch, KNX®

This wireless and battery-free dimmer switch in Niko design can operate as a switch, a dimmer, a roller shutter control or a scene selector in a KNX® system. This dimmer switch works together with the KNX® wireless media coupler (360-33001) who transmits the KNX® commands to the KNX® bus. This allows you to easily extend a KNX® system without breaking walls or installing extra cables. For best performance, follow the installation and radio planning guidelines. Configure the dimmer switch buttons with the ETS software that is available on the KNX® Association website together with the KNX® programming adapter (360-39001). The following communication objects can be linked to the buttons: single channel, dimming and shutter control. The supported functions are: on, off, toggle, up, down, darker, brighter, scene number, send value in percentage, in angle, in 2 bits, in 8 bits. Up to six button combinations can be configured. The dimmer switch can be mounted into a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive tape (included). The central plate and the faceplate must be ordered separately. The dimmer switch combines with any Niko Pure, Niko Intense and Niko Original faceplate in the colour of your choice.

Favorites ( 0 )