! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Programming adapter, KNX®

This programming adapter allows you to provide the KNX® wireless and battery-free dimmer switch (360-31001) with energy during commissioning. Connect the programming adapter to the KNX® dimmer switch and configure the functions of the buttons using the ETS software that is available on the KNX® Association website. The adapter requires two AAA batteries (not included).

Product details

This product consists of several components. Below you will find an overview of all the component parts.

Programming adapter, KNX®

Reference code
360-39001

This programming adapter allows you to provide the KNX® wireless and battery-free dimmer switch (360-31001) with energy during commissioning. Connect the programming adapter to the KNX® dimmer switch and configure the functions of the buttons using the ETS software that is available on the KNX® Association website. The adapter requires two AAA batteries (not included).

Specification description

Programming adapter, KNX®

The central plate is mounted by means of a screw with mixed screw head (Pz1 slot 1x5.5mm) fixed to a recessed socket. This central plate is surrounded by a flat border which is provided at the 4 corners with a rectangular opening in which a multi-positional snap hook is located. The construction of the central plate ensures that the faceplate can always be attached flat to the wall, even in cases of untidy plasterwork. This works in two directions: If the flush-mounting box sticks out of the plasterwork, the multi-positional snap hooks can compensate for a 1 to 1.2 mm margin; if the flush-mounting box is sunk too deeply in the plasterwork, the snap hooks can compensate for up to a 1.8 mm margin. The flat edge of the central plate also has 4 round openings that ensure the correct positioning of the faceplate in relation to the central plate. The back of the central plate is equipped with a shutters. This allows contact to be made after simultaneous introduction of the pins of a plug but prevents contact from being made if only 1 pin is introduced or if the two pins are not introduced simultaneously. After mounting all components (faceplate, central plate, overvoltage module and socket outlet), no metal parts are visible thanks to the flat edge of the central plate. The combination of a socket outlet, an overvoltage module, a central plate with shutters and the faceplate has a protection degree IP41. The plastic parts of the central plate comply with a filament test of 650°C, and they are halogen-free. The central plate is made of rigid PC+ASA. The raw material is colored in the mass, cream (approximately RAL1013). After mounting, an impact resistance of IK06 is guaranteed. Dimensions central plate with flat edge: 56x56mm, dimensions central plate visible part: 45x45mm. Flush-mounting depth socket outlet= 28.5 mm.

Related products

Niko dimmer switch for Hue system

With this wireless and battery-free dimmer, you can operate the Philips Hue lamps effortlessly. Determine in the Philips Hue app what each button must do (switching on and off, dimming, activating scene settings). Mechanism including button and Niko Intense or Original faceplate.

Wireless switch with two buttons

This wireless switch with two buttons can be used by a wireless receiver from the Easywave range. It can be used as one dual-button control (upper=on, lower=off), or as two one-button controls (toggle on/off or pulse). The switch can also be used in the Niko Home Control installation for bus wiring in combination with the USB RF interface Easywave (410-00099) for Niko Home Control or in the Niko Home Control installation for traditional wiring in combination with the wireless smart hub (552-00001).

Wireless switch with four buttons

This wireless switch with four buttons can be used by a smart switch or a wireless receiver. It can be used as a two dual-button controls (upper:on, lower off) or as four one-button controls (on/off or pulse). The switch can also be used in the Niko Home Control installation for bus wiring in combination with the USB RF interface Easywave (410-00099) for Niko Home Control or in the Niko Home Control installation for traditional wiring in combination with the wireless smart hub (552-00001).

Favorites ( 0 )