! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Electronic thermostat, champagne coated

Reference code
157-88001
Technical manuals
Certificaten CE-Marking

Description

This electronic thermostat controls the central heating as well as the electric heating or air conditioning. There are 2 operational modes, heating and air conditioning, and 3 different status modes: on and day mode, eco and night mode and standby mode. Finishing colour: champagne coated.

Specification description

Electronic thermostat, champagne coated.

  • Function: This electronic analogue thermostat controls the central heating as well as the electric heating or air conditioning. There are 2 operational modes, heating and air conditioning, and 3 different status modes: on and day mode, eco and night mode and standby mode. The thermostat is designed for flush mounting into a wall or partition. With this thermostat, the temperature can be regulated from +5°C to +30°C. You can set a minimum and a maximum temperature so that, for example, the temperature can only be adjusted between +15°C and +25°C.
  • Print: The setting key has a scale indicating the temperature in steps of 5 °C. In the bottom left corner there is a 3-position switch indicating an off button, daytime setting (sun) and night-time setting (moon).
  • Colour: enamelled champagne
  • Adjustment range: +5 °C to +30 °C
  • Accuracy: +/- 1 °C
  • Hysteresis: 1 °C
  • Material central plate: The central plate is enamelled and made of rigid PC and ASA.
  • Flush-mounting frame
    • 1 mm-thick metal
    • galvanized on all sides after cutting, even on the cut edges
    • with 4 grooves with screw hole of 7 mm
    • with 4 screw holes (indicated by a screw symbol) with a diameter of 3 mm for mounting on panels
  • Flush-mounting height: recommended at 1.5 m
  • Flush-mounting depth: 40 mm minimum depth of the flush-mounting box
  • Fixing method
    • with screws for simple fixing in a flush-mounting box with grip surfaces
  • Connection terminals: 5 connection terminals
  • Centre-to-centre distance
    • Simple and quick assembly of one or more mechanisms by the indication (chalk line, laser, etc.) of the centre of the flush-mounting frame
    • vertical coupling centre-to-centre distance 60 mm by sliding several bases into each other, they lock themselves automatically
    • vertical coupling centre-to-centre distance 71 mm using pre-formed lips at the bottom, by folding the lips downwards over a length of 1 mm, the bases support each other and the centre-to-centre distance is guaranteed.
    • horizontal connection of multiple bases is quick and perfect thanks to the folded-up dovetails on the left and right sides
    • extra robustness due to the folded-up edges on the outside of the base and the continuation into the inside of the base
  • Wire connection
    • the sockets are equipped with screw terminals for clamping the wires.
  • Wire capacity
    • 2 x 1.5 mm² or 1 x 2.5 mm² per connection terminal
  • End border: The flush-mounting frame is equipped, both on the top and the bottom, with a dark grey, plastic end border. This border is made of PC+ASA and is joined to the flush-mounting frame using a melting process. The corners of the two end borders are equipped with rectangular openings (7.9 x 1.5 mm) each containing a multi-positional snap hook. Thanks to the snap hooks, the 4 rectangular openings ensure that the faceplate can always be attached flat to the wall, even in cases of untidy plasterwork. This works in two directions: If the flush-mounting box sticks out of the plasterwork, the multi-positional snap hooks can compensate for a 1 to 1.2 mm margin; if the flush-mounting box is sunk too deeply in the plasterwork, the snap hooks can compensate for up to a 1.8 mm margin. The end borders also have 4 round openings that ensure the correct positioning of the faceplate in relation to the central plate.
  • Protection degree: IP41 for the combination of a mechanism, central plate and faceplate
  • The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
  • Ambient temperature during storage and transport: -20 to +60 °C
  • Marking: CE
Alternative colors
  • 100-88001
    Colour cream
    Reference code 100-88001
  • 101-88001
    Colour white
    Reference code 101-88001
  • 102-88001
    Colour light grey
    Reference code 102-88001
  • 104-88001
    Colour greige
    Reference code 104-88001
  • 121-88001
    Colour sterling
    Reference code 121-88001
  • 122-88001
    Colour anthracite
    Reference code 122-88001
  • 123-88001
    Colour bronze
    Reference code 123-88001
  • 124-88001
    Colour dark brown
    Reference code 124-88001
  • 154-88001
    Colour white coated
    Reference code 154-88001
  • 157-88001
    Colour champagne coated
    Reference code 157-88001
  • 161-88001
    Colour black coated
    Reference code 161-88001
  • 200-88001
    Colour piano black coated
    Reference code 200-88001
  • 220-88001
    Colour steel grey coated
    Reference code 220-88001
  • 221-88001
    Colour gold coated
    Reference code 221-88001
The article above is part of this product:

Related products:

Favorites ( 0 )