! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Electronic thermostat, cream

Reference code


This electronic thermostat controls the central heating as well as the electric heating or air conditioning. There are 2 operational modes, heating and air conditioning, and 3 different status modes: on and day mode, eco and night mode and standby mode. Finishing colour: cream.

Specification description

Electronic thermostat, cream. This electronic analogue thermostat controls the central heating as well as the electric heating or air conditioning. There are 2 operational modes, heating and air conditioning, and 3 different status modes: on and day mode, eco and night mode and standby mode. The thermostat is designed for flush mounting into a wall or partition. With this thermostat, the temperature can be regulated from +5°C to +30°C. You can set a minimum and a maximum temperature so that, for example, the temperature can only be adjusted between +15°C and +25°C. The setting key has a scale indicating the temperature in steps of 5 °C. In the bottom left corner there is a 3-position switch indicating an off button, daytime setting (sun) and night-time setting (moon).

The central plate is made of rigid PC and ASA. The base material is coloured in mass. 5 connection terminals 2 x 1.5 mm² or 1 x 2.5 mm² per connection terminal The sockets are equipped with screw terminals for clamping the wires. The flush-mounting frame is equipped, both on the top and the bottom, with a dark grey, plastic end border. This border is made of PC+ASA and is joined to the flush-mounting frame using a melting process. The corners of the two end borders are equipped with rectangular openings (7.9 x 1.5 mm) each containing a multi-positional snap hook. Thanks to the snap hooks, the 4 rectangular openings ensure that the flush surround plate can always be attached flat to the wall, even in cases of untidy plasterwork. This works in two directions: If the flush-mounting box sticks out of the plasterwork, the multi-positional snap hooks can compensate for a 1 to 1.2 mm margin; if the flush-mounting box is sunk too deeply in the plasterwork, the snap hooks can compensate for up to a 1.8 mm margin. The end borders also have 4 round openings that ensure the correct positioning of the flush surround plate in relation to the central plate. When mounting in a flush-mounting box with grip surfaces, use claws that can be rotated open using screws with a slotted screwhead (slot 0.8 x 5 mm). The claws, which have a depth of engagement of 31 mm, turn back completely when loosened. The flush-mounting frame is made from 1 mm-thick metal which is galvanized on all sides after cutting, even on the cut edges. On the horizontal and vertical axes, the flush-mounting frame has 4 grooves for screw mounting in flush-mounting boxes. These grooves have a screw aperture of 7 mm. For mounting on panels, the flush-mounting frame is equipped with 4 screw holes (indicated by a screw symbol) with a diameter of 3 mm. The middle of the flush-mounting frame is indicated (chalk line, laser, ..) in both the horizontal and vertical directions, so that mounting one or more mechanisms can be carried out quickly and easily. At the right and left sides, the flush-mounting frame is equipped with folded-up dovetails, allowing for a quick and perfect horizontal coupling of several switches. The folded-up edges on the outside of the base and their continuation to the inside ensure additional robustness. The bases can be coupled vertically with a centre-to-centre distance of 60 x 71 mm by sliding them into each other. They automatically lock into place. For horizontal coupling of bases with a centre-to-centre distance of 71 mm, the base is equipped with two pre-formed lips at the bottom. By folding these lips down over a length of 1 mm, this rests perfectly on the one below and the centre-to-centre distance of 71 mm is guaranteed.

  • Colour: cream (coloured in mass, approximately RAL 1013)
  • Adjustment range: +5 °C to +30 °C
  • Accuracy: +/- 1 °C
  • Hysteresis: 1 °C
  • Flush-mounting height: recommended at 1.5 m
  • Flush-mounting depth: 40 mm minimum depth of the flush-mounting box
  • Minimum ambient temperature: 0 °C
  • Maximum ambient temperature: +50 °C
  • Ambient temperature during storage and transport: -20 to +60 °C
  • Protection degree: IP21 (designed for use in an environment with non-condensing humidity)
  • Marking: CE
Alternative colors
  • 100-88000
    Colour cream
    Reference code 100-88000
  • 101-88000
    Colour white
    Reference code 101-88000
  • 102-88000
    Colour light grey
    Reference code 102-88000
  • 104-88000
    Colour greige
    Reference code 104-88000
  • 121-88000
    Colour sterling
    Reference code 121-88000
  • 122-88000
    Colour anthracite
    Reference code 122-88000
  • 123-88000
    Colour bronze
    Reference code 123-88000
  • 124-88000
    Colour dark brown
    Reference code 124-88000
  • 154-88000
    Colour white coated
    Reference code 154-88000
  • 157-88000
    Colour champagne coated
    Reference code 157-88000
  • 161-88000
    Colour black coated
    Reference code 161-88000
  • 221-88000
    Colour alu gold coated
    Reference code 221-88000
  • 220-88000
    Colour alu steel grey coated
    Reference code 220-88000
  • 200-88000
    Colour Bakelite® piano black coated
    Reference code 200-88000
The article above is part of this product:

Related products:

Favorites ( 0 )