Finishing set for socket outlet without earthing, with shutters, flush-mounting depth 21mm, anthracite
Central plate for flush-mounting socket outlet without earthing and shutters. Finishing colour: anthracite.
Finishing set for socket outlet without earthing, with shutters, flush-mounting depth 21mm, anthracite. This central plate is surrounded with a flat edge that is equipped at all 4 corners with a rectangular opening, each containing a multi-positional snap hook. The construction of the central plate ensures that the faceplate can always be attached flat to the wall, even in cases of untidy plasterwork. This works in two directions: If the flush-mounting box sticks out of the plasterwork, the multi-positional snap hooks can compensate for a 1 to 1.2 mm margin; if the flush-mounting box is sunk too deeply in the plasterwork, the snap hooks can compensate for up to a 1.8 mm margin. The flat edge around the central plate also has 4 round openings that ensure the correct positioning of the faceplate in relation to the central plate. After mounting all components (faceplate, finishing set and switch), no metal parts are visible thanks to the flat edge of the central plate.
- Material central plate: The central plate is enamelled and made of rigid PC and ASA.
- Colour: enamelled anthracite (approximately NCS S 7502 - R, RAL 7022)
- Dismantling: To dismount simply unscrew the central plate.
- Shutters: Equipped with shutters. This means that contact is made after simultaneous introduction of the pins of a plug but prevents contact from being made if only 1 pin is introduced or if the two pins are not introduced simultaneously.
- Protection degree: The combination of a mechanism, a central plate and a faceplate has a protection degree of IP21-D
- Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
- Fire safety
- The plastic parts of the central plate are self-extinguishing (comply with a filament test of 650°C)
- The plastic parts of the central plate are halogen-free.
- Dimensions of finishing with flat edge: 56 x 56 mm (HxW)
Dimensions of visible area of finishing: 45 x 45 mm (HxW)
- Dimensions (HxWxD): 55.8 x 55.8 x 18.7 mm
- Certification marks: CEBEC
- Marking: CE
Reference code 100-66501
Reference code 101-66501
Colour light grey
Reference code 102-66501
Reference code 121-66501
Reference code 122-66501
Reference code 123-66501
Colour dark brown
Reference code 124-66501
Colour white coated
Reference code 154-66501
Colour champagne coated
Reference code 157-66501
Colour black coated
Reference code 161-66501
Colour piano black coated
Reference code 200-66501
Colour steel grey coated
Reference code 220-66501
Colour gold coated
Reference code 221-66501