! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Socket outlet 71 x 71 mm with side earthing and plug-in terminals, base and finishing set cream

Reference code
100-66915

Description

Compound two-pole, flush-mounting socket outlet 16 A~ 250 V (base and finishing set), with side earthing and central plate with shutters (flush-mounting depth 28.5 mm). The socket outlet is equipped with contact buses with a large contact surface area which must not rest on the base in order to be connected and plug-in terminals with releases. These releases can be operated from the front side by hand or with a screwdriver. Finishing colour: cream

Specification description

Socket outlet 71 x 71 mm with side earthing and plug-in terminals, base and finishing set cream.

  • Protection degree: The combination of a mechanism, a central plate and a flush surround plate has a protection degree of IP20.
  • The combination of a mechanism, a central plate and a flush surround plate has an impact-resistance of IK06
  • Certification marks: ÖVE, KEMA, VDE, SEMKO

Base for socket outlet with side earthing, flush-mounting depth 28.5 mm, 16 A/250 Vac, plug-in terminals. The sockets are equipped with plug-in terminals for clamping the wires. The socket outlet has side earthing in high quality brass. All connection terminals are located at the top of the end socket and can contain up to 2 x 2.5 mm² of wire. The stripping length (14 mm) of the wires is indelibly imprinted on the back of the base. When fixing in a flush-mounting box screws should be used. The flush-mounting frame is made from 1 mm-thick metal which is galvanized on all sides after cutting, even on the cut edges. On the horizontal and vertical axes, the flush-mounting frame has 4 grooves for screw mounting in flush-mounting boxes. These grooves have a screw aperture of 7 mm. For mounting on panels, the flush-mounting frame is equipped with 4 screw holes (indicated by a screw symbol) with a diameter of 3 mm. The middle of the flush-mounting frame is indicated (chalk line, laser, ..) in both the horizontal and vertical directions, so that mounting one or more mechanisms can be carried out quickly and easily. The base is equipped on all sides with folded-up dovetails, allowing for both vertical and horizontal coupling (centre-to-centre distance of 71 x 71 mm) of several bases to be carried out quickly and perfectly. The folded-up edges on the outside of the base and their continuation to the inside ensure additional robustness. The 4 rectangular openings (7 x 2.5 mm) in the flush-mounting frame can compensate for a margin of 1 to 1.2 mm if the flush-mounting box protrudes beyond the plasterwork. In the case of such a margin, the flush surround plate can still butt up perfectly against the wall.

  • Protection degree: The combination of a mechanism, a central plate and a flush surround plate has a protection degree of IP20.
  • Impact resistance: The combination of a mechanism, a central plate and a flush surround plate has an impact-resistance of IK06
  • Flush-mounting depth: 28.5 mm
  • Ambient temperature: -5 – +40 °C
  • Dimensions (HxWxD): 732 x 73 x 37 mm
  • Certification marks: ÖVE, KEMA, VDE, SEMKO

Finishing set for socket outlet with side earting and shutters, cream. This central plate is surrounded with a flat edge that is equipped at all 4 corners with a rectangular opening, each containing a multi-positional snap hook. The construction of the central plate ensures that the flush-surround plate can always be attached flat to the wall, even in cases of untidy plasterwork. This works in two directions: If the flush-mounting box sticks out of the plasterwork, the multi-positional snap hooks can compensate for a 1 to 1.2 mm margin; if the flush-mounting box is sunk too deeply in the plasterwork, the snap hooks can compensate for up to a 1.8 mm margin. The flat edge around the central plate also has 4 round openings that ensure the correct positioning of the flush surround plate in relation to the central plate. After mounting all components (flush surround plate, finishing set and switch), no metal parts are visible thanks to the flat edge of the central plate. To dismount simply unscrew the central plate.

  • Material central plate: The central plate is made of rigid PC and ASA. The base material is coloured in mass.
  • Colour: cream (coloured in mass, approximately RAL 1013)
  • Protection degree: The combination of a mechanism, a central plate and a flush surround plate has a protection degree of IP20.
  • Impact resistance: The combination of a mechanism, a central plate and a flush surround plate has an impact-resistance of IK06
  • The plastic parts of the central plate are self-extinguishing (comply with a filament test of 650°C) and are halogen-free.
  • Dimensions of finishing with flat edge: 56 x 56 mm (HxW)

Dimensions of visible area of finishing: 45 x 45 mm (HxW)

Alternative colors
  • 100-66915
    Colour cream
    Reference code 100-66915
  • 101-66915
    Colour white
    Reference code 101-66915
The article above is part of this product:

Related products:

Favorites ( 0 )