! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Socket outlet with earth pin and shutters, flush-mounting depth 28.5 mm, base with plug-in terminals and finishing set

Reference code
101-66605
Technical datasheets
Technical manuals
Inspection certificates
Certificaten CE-Marking

Description

Compound socket outlet (base and finishing set) with pin earthing. The base is equipped with plug-in terminals and claw fixing. The socket outlet also has a shutters and a flush-mounting depth of 28.5 mm.

Specification description

Socket outlet with earth pin and shutters, flush-mounting depth 28.5 mm, base with plug-in terminals and finishing set.

  • Protection degree: IP20
  • Protection degree: The combination of a mechanism, a central plate and a faceplate has a protection degree of IP21-D
  • The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
  • Certification marks: CEBEC, NF
  • Marking: CE

Base for socket outlet with pin earthing and shutters, flush-mounting depth 28.5 mm, 16 A/250 Vac, plug-in terminals.

  • Protection degree: The combination of a mechanism, a central plate and a faceplate has a protection degree of IP21-D
  • Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
  • Material base
    • ureumformaldehyde (UF) with high heat resistance
    • white RAL9010 (approximately)
  • Flush-mounting frame
    • 1 mm-thick metal
    • galvanized on all sides after cutting, even on the cut edges
    • with 4 grooves with screw hole of 7 mm
    • with 4 screw holes (indicated by a screw symbol) with a diameter of 3 mm for mounting on panels
  • Flush-mounting depth: 28.5 mm
  • Fixing method
    • simple mounting in a flush-mounting box with grip surfaces
    • with claws that rotate open using screws with a combination screwhead (Pz2 or slot 1 x 5.5 mm), for mounting in a flush-mounting box with grip surfaces
    • engagement depth of claws: 23.5 mm
    • claws turn back completely when loosened
  • Centre-to-centre distance
    • Simple and quick assembly of one or more mechanisms by the indication (chalk line, laser, etc.) of the centre of the flush-mounting frame
    • vertical coupling centre-to-centre distance 60 mm by sliding several bases into each other, they lock themselves automatically
    • vertical coupling centre-to-centre distance 71 mm using pre-formed lips at the bottom, by folding the lips downwards over a length of 1 mm, the bases support each other and the centre-to-centre distance is guaranteed.
    • horizontal connection of multiple bases is quick and perfect thanks to the folded-up dovetails on the left and right sides
    • extra robustness due to the folded-up edges on the outside of the base and the continuation into the inside of the base
  • End border: 4 rectangular openings (7 x 2.5 mm) which, if the flush-mounting box protrudes from the plasterwork, can compensate for a margin of between 1 and 1.2 mm, so that the faceplate can still butt up perfectly against the wall
  • Wire connection
    • contact buses fitted with plug-in terminals for clamping the wires
  • Wire capacity
    • all connection terminals at the top side of the base
    • up to 2 x 2.5 mm² wire per terminal
  • Stripping length
    • 14 mm stripping length
    • indelibly indicated at the rear side: stripping length
  • Ambient temperature: -5 – +40 °C
  • Certification marks: CEBEC, NF
  • Marking: CE

Finishing set for socket outlet with earth pin and shutters, flush-mounting depth 28.5 mm. This central plate is surrounded with a flat edge that is equipped at all 4 corners with a rectangular opening, each containing a multi-positional snap hook. The construction of the central plate ensures that the faceplate can always be attached flat to the wall, even in cases of untidy plasterwork. This works in two directions: If the flush-mounting box sticks out of the plasterwork, the multi-positional snap hooks can compensate for a 1 to 1.2 mm margin; if the flush-mounting box is sunk too deeply in the plasterwork, the snap hooks can compensate for up to a 1.8 mm margin. The flat edge around the central plate also has 4 round openings that ensure the correct positioning of the faceplate in relation to the central plate. After mounting all components (faceplate, finishing set and switch), no metal parts are visible thanks to the flat edge of the central plate.

  • Material central plate: The central plate is made of rigid PC and ASA. The base material is coloured in mass.
  • Dismantling: To dismount simply unscrew the central plate.
  • Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
  • Fire safety
    • The plastic parts of the central plate are self-extinguishing (comply with a filament test of 650°C)
    • The plastic parts of the central plate are halogen-free.
  • Dimensions of finishing with flat edge: 56 x 56 mm (HxW)

Dimensions of visible area of finishing: 45 x 45 mm (HxW)

  • Marking: CE
Alternative colors
  • 101-66605
    Colour
    Reference code 101-66605
  • 100-66605
    Colour
    Reference code 100-66605
The article above is part of this product:

Related products:

Favorites ( 0 )