Finishing set for single switch or push button, steel grey coated
Description
Central plate for single push button with transparent text field. You can easily add a short label or icons to the transparent text field.
Finishing colour: steel grey coated.
Specification description
Finishing set for single switch or push button, steel grey coated. The key and the intermediate plate (board) form one unit. The central plate contains a transparent text field to which you can easily add short text or icons. This central plate is surrounded with a flat edge that is equipped at all 4 corners with a rectangular opening, each containing a multi-positional snap hook. The construction of the central plate ensures that the faceplate can always be attached flat to the wall, even in cases of untidy plasterwork. This works in two directions: If the flush-mounting box sticks out of the plasterwork, the multi-positional snap hooks can compensate for a 1 to 1.2 mm margin; if the flush-mounting box is sunk too deeply in the plasterwork, the snap hooks can compensate for up to a 1.8 mm margin. The flat edge around the central plate also has 4 round openings that ensure the correct positioning of the faceplate in relation to the central plate. After mounting all components (faceplate, finishing set and switch), no metal parts are visible thanks to the flat edge of the central plate. For dismounting the central plate, the flat edge is equipped with two notches indicated by a screwdriver symbol. The central plate can easily be dismounted using a slotted screwdriver.
- Number of control buttons: 1 control button
- Material central plate: The central plate is enamelled and made of rigid PC and ASA.
- Colour: alu-look steel grey
- Protection degree: The combination of a mechanism, a central plate and a faceplate has a protection degree of IP41
- Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
- The plastic parts of the central plate are self-extinguishing (comply with a filament test of 650°C) and are halogen-free.
- Dimensions of finishing with flat edge: 56 x 56 mm (HxW)
Dimensions of visible area of finishing: 45 x 45 mm (HxW)
Related products:
Base for an intermediate switch or intermediate pull switch 10 AX/250 Vac, plug-in terminals
Mechanism for an intermediate switch or intermediate pull switch, with claw fixing. An intermediate switch can be used to operate one lamp from three or more locations. A finishing set and faceplate in the colour of your choice must be ordered separately.
Base for an intermediate switch or intermediate pull switch 10 AX/250 Vac, plug-in terminals
Mechanism for an intermediate switch or intermediate pull switch, with screw fixing. An intermediate switch can be used to operate one lamp from three or more locations. A finishing set and faceplate in the colour of your choice must be ordered separately.
Base for an intermediate switch or intermediate pull switch 10 AX/250 Vac, screw terminals
Mechanism for an intermediate switch or intermediate pull switch, with claw fixing. An intermediate switch can be used to operate one lamp from three or more locations. A finishing set and faceplate in the colour of your choice must be ordered separately.
Base for an intermediate switch or intermediate pull switch 10 AX/250 Vac, plug-in terminals
Mechanism for an intermediate switch or intermediate pull switch, with claw fixing. An intermediate switch can be used to operate one lamp from three or more locations. A finishing set and faceplate in the colour of your choice must be ordered separately.
Base for an intermediate switch or intermediate pull switch 10 AX/250 Vac, plug-in terminals
Mechanism for an intermediate switch or intermediate pull switch, with screw fixing. An intermediate switch can be used to operate one lamp from three or more locations. A finishing set and faceplate in the colour of your choice must be ordered separately.
Base for an intermediate switch or intermediate pull switch 10 AX/250 Vac, screw terminals
Mechanism for an intermediate switch or intermediate pull switch, with screw fixing. An intermediate switch can be used to operate one lamp from three or more locations. A finishing set and faceplate in the colour of your choice must be ordered separately.
Base for an intermediate switch or intermediate pull switch 10 AX/250 Vac, screw terminals
Mechanism for an intermediate switch or intermediate pull switch, with claw fixing. An intermediate switch can be used to operate one lamp from three or more locations. A finishing set and faceplate in the colour of your choice must be ordered separately.
Base for an intermediate switch or intermediate pull switch 10 AX/250 Vac, screw terminals
Mechanism for an intermediate switch or intermediate pull switch, with screw fixing. An intermediate switch can be used to operate one lamp from three or more locations. A finishing set and faceplate in the colour of your choice must be ordered separately.
Finishing set for single switch or push button, cream
This key is used in the installation of a single-pole, double-pole, two-way or intermediate switch or for a push button. You can control 1 light point with this key. Finishing colour: cream.
Finishing set for single switch or push button, cream
Central plate for single push button with transparent text field. You can easily add a short label or icons to the transparent text field. Finishing colour: cream.
Intermediate switch, base, screw terminals and finishing set white
Compound flush-mounted intermediate switch (base and finishing set). The base is equipped with screw terminals and claw fixing. This switch is used to control 1 light point from various rooms. You must use an extra teleruptor for this switch. Finishing colour: white
Intermediate switch, base, plug-in terminals and finishing set white
Compound flush-mounted intermediate switch (base and finishing set). The base is equipped with plug-in terminals and claw fixing. This switch is used to control 1 light point from various rooms. You must use an extra teleruptor for this switch. Finishing colour: white
Single switch, 71 x 71 mm with plug-in terminals, base and finishing set white
Single switch 71 x 71 mm with plug-in terminals, base and finishing set, Finishing colour: white
Finishing set with lens for single switch or push button, white
Central plate made with a single push button with a lens. You can control 1 light point with this push button. An LED can be placed behind the lens so that you can see whether the light is switched on or not Finishing colour: white.
