! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Base for 2x single coax connection for TV and FM and a satellite connection

Reference code
170-79551

Description

Mechanism for 2 single coax connections: one for TV and one for FM, with screw fixing. A satellite connection is also provided. A finishing set in the colour of your choice must be ordered separately.

Specification description

Base for 2x single coax connection for TV and FM and a satellite connection. Connection TV <1 dB (5-75Mhz); 1.5 dB +/- 1 dB (125-860 MHz), connection FM < 3 dB (88-108 Mhz), in compliance with DIN45325 and IEC 60169-2, suitable for Ø 9.5 mm plugs. Satellite connection 2.5 dB +/-1 dB (950-2150 Mhz). 1A,18 V DC. The contacts are covered by means of a permanent metal cover. The coax cable is connected at the back of the mechanism. Two arrows and the stripping length are indicated at the back of the base as a mounting aid. The arrow pointing downward indicates where the coax cable has to be inserted. The coax cable is screwed with a screw with mixed screwhead (crosshead-slit 1 mm). The strain relief is screwed with a permanent screw with mixed screwhead (crosshead-slit 1 mm). When fixing in a flush-mounting box screws should be used. The flush-mounting frame is made from 1 mm-thick metal which is galvanized on all sides after cutting, even on the cut edges. On the horizontal and vertical axes, the flush-mounting frame has 4 grooves for screw mounting in flush-mounting boxes. These grooves have a screw aperture of 7 mm. For mounting on panels, the flush-mounting frame is equipped with 4 screw holes (indicated by a screw symbol) with a diameter of 3 mm. The middle of the flush-mounting frame is indicated (chalk line, laser, ..) in both the horizontal and vertical directions, so that mounting one or more mechanisms can be carried out quickly and easily. The base is equipped on all sides with folded-up dovetails, allowing for both vertical and horizontal coupling (centre-to-centre distance of 71 x 71 mm) of several bases to be carried out quickly and perfectly. The folded-up edges on the outside of the base and their continuation to the inside ensure additional robustness. The flush-mounting frame is equipped, both on the top and the bottom, with a dark grey, plastic end border. This border is made of PC+ASA and is joined to the flush-mounting frame using a melting process. The corners of the two end borders are equipped with rectangular openings (7.9 x 1.5 mm) each containing a multi-positional snap hook. Thanks to the snap hooks, the 4 rectangular openings ensure that the flush surround plate can always be attached flat to the wall, even in cases of untidy plasterwork. This works in two directions: If the flush-mounting box sticks out of the plasterwork, the multi-positional snap hooks can compensate for a 1 to 1.2 mm margin; if the flush-mounting box is sunk too deeply in the plasterwork, the snap hooks can compensate for up to a 1.8 mm margin. The end borders also have 4 round openings that ensure the correct positioning of the flush surround plate in relation to the central plate.

  • Protection degree: The combination of a switch, a central plate and a flush surround plate has a protection degree of IP41.
  • Flush-mounting depth: 29.5 mm
  • Marking: CE
Favorites ( 0 )