Niko dimmer switch, Bluetooth®
With this wireless and battery-free dimmer switch in Niko design, you can remotely operate Bluetooth® low energy 2,4 GHz wireless receivers that are located in the same room. Examples are Niko presence and motion detectors with a Bluetooth® interface (P48 and M48 series) or smart lighting with integrated Bluetooth® technology from Casambi® of Xicato®. For best performance, follow the installation and radio planning guidelines. Configure the dimmer switch buttons with the respective smart lighting smartphone app or software app (e.g. Niko detector tool app, Casambi app, Xicato Control Software, SylSmart Standalone app, ... ). Up to four buttons can be configured. No wall breaking or cable installation is needed. The dimmer switch can be mounted in a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive tape (included). The central plate and faceplate must be ordered separately. The dimmer switch combines with any Niko Pure, Niko Intense and Niko Original faceplate in the colour of your choice.
Product details
Niko dimmer switch, Bluetooth®
With this wireless and battery-free dimmer switch in Niko design, you can remotely operate Bluetooth® low energy 2,4 GHz wireless receivers that are located in the same room. Examples are Niko presence and motion detectors with a Bluetooth® interface (P48 and M48 series) or smart lighting with integrated Bluetooth® technology from Casambi® or Xicato®. For best performance, follow the installation and radio planning guidelines. Configure each dimmer switch push button with the respective smart lighting smartphone app or software app (e.g. Niko detector tool app, Casambi app, Xicato Control Software, SylSmart Standalone app, .. ). Up to four buttons can be configured. No wall breaking or cable installation is needed. The dimmer switch can be mounted in a European flush-mounting box, screwed on a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included). The central plate and faceplate must be ordered separately. The dimmer switch combines with any Niko Pure, Niko Intense and Niko Original faceplate in the colour of your choice.
Specification description
Niko dimmer switch, Bluetooth®.
- Dimensions (HxWxD): 83 x 83 x 15 mm
- Power supply: integrated kinetic energy Harvester
- RF protocol: Bluetooth® Low Energy (BLE)
- Configuration: NFC Forum Type 2 Tag (ISO/IEC 14443 Part 2 and 3)
- Modulation: Gaussian frequency-shift keying (GFSK) / 1 Mbps
- Operating frequency: 2,4 GHZ (2402 to 2480 MHZ)
- Data rate: 1 Mbps
- Mounting height: 110 cm
- Temperature (storage / operating): -25°C - +65 °C
- Maximum range (indoor): up to 10 m. Depending on the smart lighting, the receiver can also act as a relay and augment the range
- Maximum RF power: 0,4 dBm
- Antenna: Integrated antenna
- Protection degree: IP20
- Marking: CE
- Communication protocol: Bluetooth® Low Energy
- Maximum radio frequency power: 0.4 dBm
- Operating frequency: 2.4 GHz
- Weight: 25 g
- Marking: CE
Double key, for wireless dimmer switch (Hue®, Bluetooth®, EnOcean®, KNX®), cream
This double key with two control buttons can be used for the wireless Niko dimmer switch for Hue system, EnOcean®, Bluetooth® and KNX®
Conveniently control various lighting points.
Related products
Niko dimmer switch for Hue system
With this wireless and battery-free dimmer switch, you can effortlessly operate Philips Hue lamps. Determine in the Philips Hue app what each button must do (switching on and off, dimming, activating scene settings). No wall breaking or cable installation is needed. The dimmer switch can be mounted on a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included). Please note that Philips Hue Bridge v2 is required and not included.
Wireless switch with two buttons
This wireless switch with two buttons can be used by a wireless receiver from the Easywave range. It can be used as one dual-button control (upper=on, lower=off), or as two one-button controls (toggle on/off or pulse). The switch can also be used in the Niko Home Control installation for bus wiring in combination with the USB RF interface Easywave (410-00099) for Niko Home Control or in the Niko Home Control installation for traditional wiring in combination with the wireless smart hub (552-00001).
Wireless switch with four buttons
This wireless switch with four buttons can be used by a smart switch or a wireless receiver. It can be used as a two dual-button controls (upper:on, lower off) or as four one-button controls (on/off or pulse). The switch can also be used in the Niko Home Control installation for bus wiring in combination with the USB RF interface Easywave (410-00099) for Niko Home Control or in the Niko Home Control installation for traditional wiring in combination with the wireless smart hub (552-00001).
