! This version of Internet Explorer is not supported anymore !
We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)
Base for a two-way switch or two-way pull switch 16 AX/250 Vac, screw terminals
Description
Mechanism for a two-way switch or two-way pull switch, with screw fixing. Two-way switches are used to operate one lamp from two different locations. A finishing set and faceplate in the colour of your choice must be ordered separately.
Specification description
Base for a two-way switch or two-way pull switch 16 AX/250 Vac, screw terminals.
- Function: – switch
- block-shaped silver contacts (cadmium-free) in the form of a cross
- Protection degree: IP41 for the combination of a mechanism, central plate and faceplate
- Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
- SBL load: 200 W
- Material base
- ureumformaldehyde (UF) with high heat resistance
- white RAL9010 (approximately)
- Flush-mounting frame
- 1 mm-thick metal
- galvanized on all sides after cutting, even on the cut edges
- with 4 grooves with screw hole of 7 mm
- with 4 screw holes (indicated by a screw symbol) with a diameter of 3 mm for mounting on panels
- Required type of flush-mounting box
- depth: min. 40 mm (cabling space included)
- claw/screw fixing: 60 mm
- inner diameter box: 60 mm
- multiple boxes centre distance horizontal: 71 mm
- multiple boxes centre distance vertical: 71 mm
- multiple boxes centre distance vertical: 60 mm for Belgium and France
- Fixing method
- with screws for simple fixing in a flush-mounting box with grip surfaces
- Centre-to-centre distance
- Simple and quick assembly of one or more mechanisms by the indication (chalk line, laser, etc.) of the centre of the flush-mounting frame
- vertical coupling centre-to-centre distance 60 mm by sliding several bases into each other, they lock themselves automatically
- vertical coupling centre-to-centre distance 71 mm using pre-formed lips at the bottom, by folding the lips downwards over a length of 1 mm, the bases support each other and the centre-to-centre distance is guaranteed.
- horizontal connection of multiple bases is quick and perfect thanks to the folded-up dovetails on the left and right sides
- extra robustness due to the folded-up edges on the outside of the base and the continuation into the inside of the base
- End border: 4 rectangular openings (7 x 2.5 mm) which, if the flush-mounting box protrudes from the plasterwork, can compensate for a margin of between 1 and 1.2 mm, so that the faceplate can still butt up perfectly against the wall
- Wire connection
- the sockets are fitted with cage clamps with permanent screws with combination screwheads (Pz1 or slot 1 x 5 mm)
- every screw is provided with a screwdriver slot that prevents the screwdriver from sliding off the screwhead.
- Wire capacity
- all connection terminals at the top side of the base
- up to 2 x 2.5 mm² wire per terminal
- Stripping length
- 8 mm stripping length
- indelibly indicated at the rear side: stripping length and wiring diagram
- indelibly indicated at the front side: terminals and switch symbol
- Lighting element
- the base is provided with 2 rectangular recesses for a lighting unit
- left recess (front view): a lighting unit with wires or an automatic lighting unit can be clicked in
- rear side: round recesses for direct contact of the automatic lighting unit with the mechanism
- Ambient temperature: -5 – +40 °C
- Certification marks: CEBEC
- Marking: CE
Related products:
Base for a two-way switch or two-way pull switch 16 AX/250 Vac, plug-in terminals
Mechanism for a two-way switch or two-way pull switch, with claw fixing. Two-way switches are used to operate one lamp from two different locations. A finishing set and faceplate in the colour of your choice must be ordered separately.
Base for a two-way switch or two-way pull switch 16 AX/250 Vac, plug-in terminals
Mechanism for a two-way switch or two-way pull switch, with screw fixing. Two-way switches are used to operate one lamp from two different locations. A finishing set and faceplate in the colour of your choice must be ordered separately.
Base for a two-way switch or two-way pull switch 16 AX/250 Vac, screw terminals
Mechanism for a two-way switch or two-way pull switch, with claw fixing. Two-way switches are used to operate one lamp from two different locations. A finishing set and faceplate in the colour of your choice must be ordered separately.
Base for a two-way switch or two-way pull switch 16 AX/250 Vac, plug-in terminals
Mechanism for a two-way switch or two-way pull switch, with screw fixing. Two-way switches are used to operate one lamp from two different locations. A finishing set and faceplate in the colour of your choice must be ordered separately.
Base for a two-way switch or two-way pull switch 16 AX/250 Vac, plug-in terminals
Mechanism for a two-way switch or two-way pull switch, with screw fixing. Two-way switches are used to operate one lamp from two different locations. A finishing set and faceplate in the colour of your choice must be ordered separately.
Base for a two-way switch or two-way pull switch 16 AX/250 Vac, screw terminals
Mechanism for a two-way switch or two-way pull switch, with claw fixing. Two-way switches are used to operate one lamp from two different locations. A finishing set and faceplate in the colour of your choice must be ordered separately.
Base for a two-way switch or two-way pull switch 16 AX/250 Vac, screw terminals
Mechanism for a two-way switch or two-way pull switch, with claw fixing. Two-way switches are used to operate one lamp from two different locations. A finishing set and faceplate in the colour of your choice must be ordered separately.
Finishing set for single switch or push button, cream
This finishing set is used in the installation of a single-pole, double-pole, two-way or intermediate switch or for a push button. It is suitable for a switch or push button used to control one light point. Finishing colour: cream.
-
Colour white
Reference code 101-61105 -
Colour light grey
Reference code 102-61105 -
Colour sterling
Reference code 121-61105 -
Colour anthracite
Reference code 122-61105 -
Colour bronze
Reference code 123-61105 -
Colour dark brown
Reference code 124-61105 -
Colour white coated
Reference code 154-61105 -
Colour champagne coated
Reference code 157-61105 -
Colour black coated
Reference code 161-61105 -
Colour piano black coated
Reference code 200-61105 -
Colour steel grey coated
Reference code 220-61105 -
Colour gold coated
Reference code 221-61105
Finishing set with text field for single switch or push button, white
Central plate for single push button with transparent text field. You can easily add a short label or icons to the transparent text field. Finishing colour: white.
-
Colour cream
Reference code 100-60905 -
Colour light grey
Reference code 102-60905 -
Colour sterling
Reference code 121-60905 -
Colour anthracite
Reference code 122-60905 -
Colour bronze
Reference code 123-60905 -
Colour dark brown
Reference code 124-60905 -
Colour white coated
Reference code 154-60905 -
Colour champagne coated
Reference code 157-60905 -
Colour black coated
Reference code 161-60905 -
Colour piano black coated
Reference code 200-60905 -
Colour steel grey coated
Reference code 220-60905 -
Colour gold coated
Reference code 221-60905
Finishing set with lens for single switch or push button, cream
Central plate made with a single push button with a lens. You can control 1 light point with this push button. An LED can be placed behind the lens so that you can see whether the light is switched on or not Finishing colour: cream.
-
Colour white
Reference code 101-60005 -
Colour light grey
Reference code 102-60005 -
Colour sterling
Reference code 121-60005 -
Colour anthracite
Reference code 122-60005 -
Colour bronze
Reference code 123-60005 -
Colour dark brown
Reference code 124-60005 -
Colour white coated
Reference code 154-60005 -
Colour champagne coated
Reference code 157-60005 -
Colour black coated
Reference code 161-60005 -
Colour piano black coated
Reference code 200-60005 -
Colour steel grey coated
Reference code 220-60005 -
Colour gold coated
Reference code 221-60005
Finishing set for mechanically controlled ventilation control, bronze
Finishing set featuring 1 key with a ventilation icon symbol. This key is used for the control of mechanically controlled ventilation. Finishing colour: bronze.
-
Colour cream
Reference code 100-61106 -
Colour white
Reference code 101-61106 -
Colour light grey
Reference code 102-61106 -
Colour sterling
Reference code 121-61106 -
Colour anthracite
Reference code 122-61106 -
Colour dark brown
Reference code 124-61106 -
Colour white coated
Reference code 154-61106 -
Colour champagne coated
Reference code 157-61106 -
Colour black coated
Reference code 161-61106 -
Colour piano black coated
Reference code 200-61106 -
Colour steel grey coated
Reference code 220-61106 -
Colour gold coated
Reference code 221-61106
Two-way control switch with 4 connection terminals, socket, plug-in terminals and finishing set white
Compound two-way control switch (base and finishing set). The base is equipped with plug-in terminals and claw fixing. There is a lens on the switch that can work with an LED module in various colours. Finishing colour: white
Two-way 16 A switch, base, screw terminals and finishing set white
Compound flush-mounted two-way switch (base and finishing set). The base is equipped with screw terminals and claw fixing. This switch allows 1 lamp to be controlled from various rooms. Finishing colour: white