! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Roll-down shutter switch, electrically separated

This switch is used for controlling the motors of roll-down shutters, garage ports, venetian blinds, awnings, etc.

To change the rotary direction, place the left key on 'STOP', then press the correct arrow on the right key and finally press 'START' again.

Product details

  • This product consists of several components. Below you will find an overview of all the component parts.

    Base for roll-down shutter switch, electrically separated, 10 AX/250 Vac, plug-in terminals

    Reference code
    170-05905

    Mechanism for a switch to control your roller blinds, with claw fixing. This roll-down shutter switch is electrically separated. A finishing set and faceplate in the colour of your choice must be ordered separately.

    This switch is used for controlling the motors of roll-down shutters, garage ports, venetian blinds and awnings via a bistable control (selection rotary direction-START-STOP).

    Select the rotary direction on the right-hand key and subsequently press 'START' to activate the motor. No need to stay near the switch while the motor is running to the end-run position.

    To change the rotary direction, first press 'STOP' at the top of the left-hand key, then select the new rotary direction on the right-hand key and subsequently press 'START' at the bottom of the left-hand key. This control is suitable for motors whose rotary direction is not to be changed frequently, and that does not require you to wait until the motor has reached its end-run position. This type of switch allows the motor capacitors to discharge, avoiding the end-run switches to stick.

    This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

    Base for roll-down shutter switch, electrically separated, 10 AX/250 Vac, plug-in terminals

    Reference code
    170-05915

    Mechanism for a switch to control your roller blinds, with screw fixing. This roll-down shutter switch is electrically separated. A finishing set and faceplate in the colour of your choice must be ordered separately.

    This switch is used for controlling the motors of roll-down shutters, garage ports, venetian blinds and awnings via a bistable control (selection rotary direction-START-STOP).

    Select the rotary direction on the right-hand key and subsequently press 'START' to activate the motor. No need to stay near the switch while the motor is running to the end-run position.

    To change the rotary direction, first press 'STOP' at the top of the left-hand key, then select the new rotary direction on the right-hand key and subsequently press 'START' at the bottom of the left-hand key. This control is suitable for motors whose rotary direction is not to be changed frequently, and that does not require you to wait until the motor has reached its end-run position. This type of switch allows the motor capacitors to discharge, avoiding the end-run switches to stick.

    This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

    Base for roll-down shutter switch, electrically separated, 10 AX/250 Vac, screw terminals

    Reference code
    170-05900

    Mechanism for a switch to control your roller blinds, with claw fixing. This roll-down shutter switch is electrically separated. A finishing set and faceplate in the colour of your choice must be ordered separately.

    This switch is used for controlling the motors of roll-down shutters, garage ports, venetian blinds and awnings via a bistable control (selection rotary direction-START-STOP).

    Select the rotary direction on the right-hand key and subsequently press 'START' to activate the motor. No need to stay near the switch while the motor is running to the end-run position.

    To change the rotary direction, first press 'STOP' at the top of the left-hand key, then select the new rotary direction on the right-hand key and subsequently press 'START' at the bottom of the left-hand key. This control is suitable for motors whose rotary direction is not to be changed frequently, and that does not require you to wait until the motor has reached its end-run position. This type of switch allows the motor capacitors to discharge, avoiding the end-run switches to stick.

    This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

    Base for roll-down shutter switch, electrically separated, 10 AX/250 Vac, screw terminals

    Reference code
    170-05901

    Mechanism for a switch to control your roller blinds, with screw fixing. This roll-down shutter switch is electrically separated. A finishing set and faceplate in the colour of your choice must be ordered separately.

    This switch is used for controlling the motors of roll-down shutters, garage ports, venetian blinds and awnings via a bistable control (selection rotary direction-START-STOP).

    Select the rotary direction on the right-hand key and subsequently press 'START' to activate the motor. No need to stay near the switch while the motor is running to the end-run position.

    To change the rotary direction, first press 'STOP' at the top of the left-hand key, then select the new rotary direction on the right-hand key and subsequently press 'START' at the bottom of the left-hand key. This control is suitable for motors whose rotary direction is not to be changed frequently, and that does not require you to wait until the motor has reached its end-run position. This type of switch allows the motor capacitors to discharge, avoiding the end-run switches to stick.

    This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

    Base for roll-down shutter switch, electrically separated, 10 AX/250 Vac, plug-in terminals

    Reference code
    170-75905

    Mechanism for a switch to control your roller blinds, with claw fixing. This roll-down shutter switch is electrically separated. A finishing set and faceplate in the colour of your choice must be ordered separately.

    This switch is used for controlling the motors of roll-down shutters, garage ports, venetian blinds and awnings via a bistable control (selection rotary direction-START-STOP).

    Select the rotary direction on the right-hand key and subsequently press 'START' to activate the motor. No need to stay near the switch while the motor is running to the end-run position.

    To change the rotary direction, first press 'STOP' at the top of the left-hand key, then select the new rotary direction on the right-hand key and subsequently press 'START' at the bottom of the left-hand key. This control is suitable for motors whose rotary direction is not to be changed frequently, and that does not require you to wait until the motor has reached its end-run position. This type of switch allows the motor capacitors to discharge, avoiding the end-run switches to stick.

    This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

    Base for roll-down shutter switch, electrically separated, 10 AX/250 Vac, plug-in terminals

    Reference code
    170-75915

    Mechanism for a switch to control your roller blinds, with screw fixing. This roll-down shutter switch is electrically separated. A finishing set and faceplate in the colour of your choice must be ordered separately.

    This switch is used for controlling the motors of roll-down shutters, garage ports, venetian blinds and awnings via a bistable control (selection rotary direction-START-STOP).

    Select the rotary direction on the right-hand key and subsequently press 'START' to activate the motor. No need to stay near the switch while the motor is running to the end-run position.

    To change the rotary direction, first press 'STOP' at the top of the left-hand key, then select the new rotary direction on the right-hand key and subsequently press 'START' at the bottom of the left-hand key. This control is suitable for motors whose rotary direction is not to be changed frequently, and that does not require you to wait until the motor has reached its end-run position. This type of switch allows the motor capacitors to discharge, avoiding the end-run switches to stick.

    This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

    Finishing set for electrically separated roll-down shutter switch, cream

    Reference code
    100-65905

    Finishing set for an electrically separated roll-down shutter switch. Finishing colour: cream.

    • 100-65905
      Colour cream
      Reference code 100-65905
    • 101-65905
      Colour white
      Reference code 101-65905
    • 102-65905
      Colour light grey
      Reference code 102-65905
    • 121-65905
      Colour sterling coated
      Reference code 121-65905
    • 122-65905
      Colour anthracite coated
      Reference code 122-65905
    • 123-65905
      Colour bronze coated
      Reference code 123-65905
    • 124-65905
      Colour dark brown coated
      Reference code 124-65905
    • 154-65905
      Colour white coated
      Reference code 154-65905
    • 157-65905
      Colour champagne coated
      Reference code 157-65905
    • 161-65905
      Colour black coated
      Reference code 161-65905
    • 200-65905
      Colour piano black coated
      Reference code 200-65905
    • 220-65905
      Colour blue grey coated
      Reference code 220-65905
    • 221-65905
      Colour gold coated
      Reference code 221-65905
  • Niko has already created this product for you. We have combined several articles into one finished product, which is available in different variations.

    Electrically separated roll-down shutter switch, base, screw terminals and finishing set cream

    Reference code
    100-65900

    Complete device (mechanism and finishing set) for an electrically separated roll-down shutter switch. Finishing colour: cream

    This switch is used for controlling the motors of roll-down shutters, garage ports, venetian blinds, awnings, etc.

    To change the rotary direction, place the left key on 'STOP', then press the correct arrow on the right key and finally press 'START' again.

    This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

    • 100-65900
      Colour cream
      Reference code 100-65900
    • 101-65900
      Colour white
      Reference code 101-65900

Related products

Single faceplate

Connected switching socket outlet for Niko Home Control with pin earthing and shutters, Zigbee®

The connected switching socket outlet communicates wirelessly with the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation with the wireless bridge for Niko Home Control (550-00640). In combination with the smart hub or wireless bridge, it can be connected to a wireless switch without additional wiring. Moreover, the plugged-in device can be linked to handy routines such as an all-off/all-on function or calendar functions and controlled remotely via the Niko Home app. In addition, its built-in consumption measurement helps you to save energy as you can consult the plugged-in device’s energy data via the Niko Home app. Use the connected switching socket outlet within the routines ‘peak mode’ and ‘solar mode’ to optimise your energy production and consumption. Note that it can also be used stand-alone as a conventional socket outlet. It is fitted with a standard built-in overtemperature and overcurrent protection to ensure complete safety.

Connected switching socket outlet for Niko Home Control with side earthing and shutters, Zigbee®

The connected switching socket outlet communicates wirelessly with the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation with the wireless bridge for Niko Home Control (550-00640). In combination with the smart hub or wireless bridge, it can be connected to a wireless switch without additional wiring. Moreover, the plugged-in device can be linked to handy routines such as an all-off/all-on function or calendar functions and controlled remotely via the Niko Home app. In addition, its built-in consumption measurement helps you to save energy as you can consult the plugged-in device’s energy data via the Niko Home app. Use the connected switching socket outlet within the routines ‘peak mode’ and ‘solar mode’ to optimise your energy production and consumption. Note that it can also be used stand-alone as a conventional socket outlet. It is fitted with a standard built-in overtemperature and overcurrent protection to ensure complete safety.

Favorites ( 0 )