Wireless measuring module (3 channels)
This module is used to measure your overall electricity consumption, solar production and energy consumption of individual devices. It communicates wirelessly with your Niko Home Control installation.
You can use the measured values to:
- monitor electricity consumption, production and self-consumption, by using the Niko Home app
- receive notifications in case of abnormal energy consumption, by using smart energy alerts in Niko Home Control
- increase your self-consumption, by using the Niko Home Control solar mode to automatically activate appliances in case of excess solar energy
- control your peak consumption, by using the Niko Home Control peak mode
Product details
Wireless measuring module (3 channels) for Niko Home Control
This module is used to measure your overall electricity consumption, solar production and energy consumption of individual devices. It communicates wirelessly with your Niko Home Control installation.
You can use the measured values to:
- monitor electricity consumption, production and self-consumption, by using the Niko Home app
- receive notifications in case of abnormal energy consumption, by using smart energy alerts in Niko Home Control
- increase your self-consumption, by using the Niko Home Control solar mode to automatically activate appliances in case of excess solar energy
- control your peak consumption, by using the Niko Home Control peak mode
Specification description
Wireless measuring module (3 channels) for Niko Home Control
- Function: • Measuring of:
- total electricity consumption of a home that is connected to a single-phase supply network
- total electricity consumption of a home connected to a three-phase supply network 3P+N (400 Vac) or 3P (3 x 230 Vac)
- amount of electricity generated by photovoltaic solar panels
- consumption of specific circuits, such as the upper floor of a home
- consumption of individual devices, such as heat pumps, heat pump boilers, air conditioning and EV chargers
- Measuring via:
- 3 current clamps to measure the electrical current in several conductors
- 4 wires to measure the voltage of the phase
- Measured data available in app
- Measurement range: 100 W – 14 490 W, 0.44 A – 63 A
- Accuracy:
- more than 100 W: IEC62053-21 class 2 (R), class 2 (L)
- between 10 W and 100 W: 5 %
- Maximum cable size in the current clamp: 10 mm²
- Length of the connector cable to the current clamp: 90 cm
- Maximum RF range: 10 m (mesh networking support for longer range)
- Euroclass reaction to fire of cables: Eca
- Not suitable for measuring direct current components
- Measuring data for information purposes only, not valid for invoicing
- Input voltage: 230 Vac ± 10 %, 50 Hz
- Maximum MCB rating: 16 A (limited by national installation rules)
- Maximum radio frequency power: 7.92 dBm
- Operating frequency: 2.4 GHz
- Ambient temperature: 0 – 40 °C
- Protection degree: IP20
- Dimensions (HxWxD): 86 x 86 x 37 mm
- Marking: CE
Related products
Connected controller for Niko Home Control II
The connected controller is the central module of every Niko Home Control installation for bus wiring. This module contains firmware that can only be programmed with the Niko Home Control programming software 2.1.1 or higher. It covers all basic functions on which a Niko Home Control installation is built. The basic functions include: • The intelligence directing the logic to the installation. Through the configuration software, the logic is saved locally on the controller. • The power supply module providing an input voltage of 26 V to the bus, the cabinet modules and the controls. Depending on the size of the installation, separate power supply modules can be added. • The connection to Niko Home Control IP devices such as touchscreens and external video units. A built-in router allows the user to connect up to 3 devices directly to the controller. With an extra switch, this number can be increased. • The connection to the internet. This enables the user to control the installation both indoors and outdoors (via mobile networks such as 3G, 4G, GPRS or Wi-Fi hotspot) using mobile devices (smartphones and tablets with iOS or Android). The module has a TEST button to verify the proper functioning and status of all other modules. Each installation must consist of one connected controller. After registration, your installation is connected, enabling control through the app via your smartphone and tablet, and you can enjoy the Niko services for upgrade or diagnosis of the installation.
Power supply
The power supply, in combination with the connected controller, provides an extra input voltage of 26 V to the bus, modules and controls. An extra power supply is only necessary in installations for which the power of the built-in power supply of the connected controller is insufficient. Up to 2 extra power supplies can be connected to installations with a connected controller. The MASTER button is not used, as the built-in power supply of the connected controller is always the master. For more information on the required number of power supplies, you can consult the installation manual.
Rail coupler
This module is always mounted first on the left at the start of a new row of DIN rail modules that doesn't contain a connected controller or power supply. Interconnect the power supply and bus through the contacts at the top and bottom.
