Wireless hand-held transmitter with 5 channels and 3 action buttons
This hand-held transmitter controls a maximum of fifteen circuits independently (depending on the settings of the receivers) and can be used for one-, two- or four-button functions. Visual feedback of the channel selection and control via LEDs.
In combination with the USB RF interface for Niko Home Control (410-00099), the hand-held transmitter can also be used in Niko Home Control installations.
Product details
Remote control with 5 channels and 3 control keys
With this hand-held transmitter, you control a maximum of 15 circuits, independent of one another, but dependent on the receiver settings. You use the hand-held transmitter for 1-key, 2-key and 4-key functions. The operation status and channel selection are indicated with LEDs.
Specification description
Remote control with 5 channels and 3 control keys
- Not compatible with the wireless bridge, compatible with the wireless smart hub
- Communication protocol: Easywave
- Maximum radio frequency power: -4.1 dBm
- Operating frequency: 0.8683 GHz
- Dimensions (HxWxD): 108 x 38 x 14 mm
- Marking: CE
Related products
USB RF interface for Niko Home Control
The USB RF interface makes it possible to use Niko wireless Easywave controls (with the exception of the remote control 05-312) in the Niko Home Control installation for bus cabling. This allows wireless controls to be installed: • on surfaces unsuited to cabling (e.g. glass or concrete partitions) • for the renovation of heritage-listed buildings • for expansions of existing installations where drilling or channelling work is not permitted • in office areas with movable partition walls • when complex cabling is to be avoided. The interface is shaped like a USB stick and can be connected to the connected controller (550-0000X) in the electrical cabinet, using the provided extension cable (3 m). The end of the extension cable is fitted with an assembly ring allowing the antennae to be attached to the outside of the electrical cabinet for optimal reception.
Wireless smart hub for Niko Home Control
The wireless smart hub for Niko Home Control is the brain of the installation. It allows you to connect all connected devices in your installation to the system. Once you have added them, you can easily control them with your smartphone. With the programming software, you can also add extensive functionalities such as scenes, all-off actions or presence simulation. The smart hub always needs to be used in combination with the Niko Home Control programming software or the Niko Home app.
Wireless battery-powered switch, 1-fold, Zigbee®
This onefold wireless battery-powered Zigbee® switch allows you to remotely control wireless Zigbee® devices. It can either be used in your Niko Home Control installation or connected to a third-party Zigbee® network as a standard dimmer switch via Find&Bind pairing. Moreover, the switch can be paired with up to eight Zigbee® receivers for stand-alone use via Touchlink. It is battery-powered with a lifetime of at least five years, based on twenty short-press actuations a day. The wireless Zigbee® switch is mounted on a plastic base. The set (base + switch 552-72001) can be screwed on a wall (screws excluded) or glued to a flat surface with double-sided adhesive tape (included). If you want to install the onefold wireless battery-powered Zigbee® on a flush-mounting box, order the variant without plastic baseplate (552-72011). Combine it with a metal baseplate (552-720X0) instead. The wireless battery-powered switch can be connected wirelessly to the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640).
