! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Wireless battery-powered switch, twofold, Zigbee®

This twofold wireless battery-powered Zigbee® switch allows you to remotely control wireless Zigbee® devices. It can either be used in your Niko Home Control installation or connected to a third-party Zigbee® network as a standard dimmer switch via Find&Bind pairing. Moreover, the switch can be paired with up to eight Zigbee® receivers for stand-alone use via Touchlink. It is battery-powered with a lifetime of at least five years, based on twenty short-press actuations a day. The wireless Zigbee® switch is mounted on a plastic base. The set (base + switch 552-72002) can be screwed on a wall (screws excluded) or glued to a flat surface with double-sided adhesive tape (included). If you want to install the twofold wireless battery-powered Zigbee® on a flush-mounting box, order the variant without plastic baseplate (552-72012). Combine it with a metal baseplate (552-720X0) instead. The double key and faceplate must be ordered separately. This twofold wireless battery-powered Zigbee® switch combines with any Niko Pure, Niko Intense and Niko Original faceplate in the colour of your choice. For best performance, follow the installation and radio planning guidelines. The wireless battery-powered switch can be connected wirelessly to the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640).

Product details

This product consists of several components. Below you will find an overview of all the component parts.

Wireless battery-powered switch, twofold, Zigbee®

Reference code
552-72002

This twofold wireless battery-powered Zigbee® switch allows you to remotely control wireless Zigbee® devices. It can either be used in your Niko Home Control installation or connected to a third-party Zigbee® network as a standard dimmer switch via Find&Bind pairing. Moreover, the switch can be paired with up to eight Zigbee® receivers for stand-alone use via Touchlink. It is battery-powered with a lifetime of at least five years, based on twenty short-press actuations a day. The wireless Zigbee® switch is mounted on a plastic base. The set (base + switch) can be screwed on a wall (screws excluded) or glued to a flat surface with double-sided adhesive tape (included). If you want to install the twofold wireless battery-powered Zigbee® on a flush-mounting box, order the variant without plastic baseplate (552-72012). Combine it with a metal baseplate (552-720X0) instead. The double key and faceplate must be ordered separately. This twofold wireless battery-powered Zigbee® switch combines with any Niko Pure, Niko Intense and Niko Original faceplate in the colour of your choice. For best performance, follow the installation and radio planning guidelines. The wireless battery-powered switch can be connected wirelessly to the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640).

Specification description

Wireless battery-powered switch, twofold, Zigbee®.

  • Maximum range (from switch to smart hub): 10 m
  • Power supply: via battery 3 V DC, CR2450
  • Battery lifespan: 5 years at 20 actuations/day
  • Antenna: integrated antenna
  • Humidity: 0 – 95 % relative humidity, non-condensing
  • Maximum per installation:
    • max. 50 connected Zigbee® devices per Niko Home Control installation
    • stand-alone: max. 8 Zigbee® receivers (ON/OFF/dimming) per switch
  • Ambient temperature operation: 5 °C – 30 °C
  • Ambient temperature storage: 0 °C – 40 °C
  • Compatible with the wireless bridge
  • Communication protocol: Zigbee® 3.0
  • Maximum radio frequency power: 8 dBm
  • Operating frequency: 2.4 GHz
  • System compatibility: talks with Homey
  • Protection degree: IP20
  • Required type of flush-mounting box
    • depth: min. 40 mm (cabling space included)
    • claw/screw fixing: 60 mm
    • inner diameter box: 60 mm
    • multiple boxes centre distance horizontal: 71 mm
    • multiple boxes centre distance vertical: 71 mm
    • multiple boxes centre distance vertical: 60 mm for Belgium and France
  • Dimensions (HxWxD): 71 x 71 x 10 mm
  • Weight: 23 g
  • Certification marks: Zigbee Certified Product
  • Marking: CE

Metal base for wireless battery-powered Zigbee® switch, 60 x 71 mm, claw fixing

Reference code
552-72000

Metal base for mounting a wireless battery-powered Zigbee® switch (552-7201X) in a flush-mounting box, 60 x 71 mm, with claw fixing. The base includes a safety protection cover.

Metal base for wireless battery-powered Zigbee® switch, 60 x 71 mm, screw fixing

Reference code
552-72020

Metal base for mounting a wireless battery-powered Zigbee® switch (552-7201X) in a flush-mounting box, 60 x 71 mm, with screw fixing. The base includes a safety protection cover.

Metal base for wireless battery-powered Zigbee® switch, 71 x 71 mm, claw fixing

Reference code
552-72030

Metal base for mounting a wireless battery-powered Zigbee® switch (552-7201X) in a flush-mounting box, 71 x 71 mm, with claw fixing. The base includes a safety protection cover.

Metal base for wireless battery-powered Zigbee® switch, 71 x 71 mm, screw fixing

Reference code
552-72010

Metal base for mounting a wireless battery-powered Zigbee® switch (552-7201X) in a flush-mounting box, 71 x 71 mm, with screw fixing. The base includes a safety protection cover.

Wireless battery-powered switch, twofold, Zigbee®, excluding base

Reference code
552-72012

This twofold wireless battery-powered Zigbee® switch allows you to remotely control wireless Zigbee® devices. It can either be used in your Niko Home Control installation or connected to a third-party Zigbee® network as a standard dimmer switch via Find&Bind pairing. Moreover, the switch can be paired with up to eight Zigbee® receivers for stand-alone use via Touchlink. It is battery-powered with a lifetime of at least five years, based on twenty short-press actuations a day. The wireless Zigbee® switch must be mounted on a metal base (552-720X0), making it possible to install the switch on a flush-mounting box. If you want to install the twofold wireless battery-powered Zigbee® on a flat wall, order the variant with a plastic base instead (552-72002). The double key, faceplate and metal base must be ordered separately. This twofold wireless battery-powered Zigbee® switch combines with any Niko Pure, Niko Intense and Niko Original faceplate in the colour of your choice. For best performance, follow the installation and radio planning guidelines. The wireless battery-powered switch can be connected wirelessly to the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640).

Specification description

Wireless battery-powered switch, twofold, Zigbee®, excluding base.

  • Mounting method: flush-mounting box
  • Maximum range (from switch to smart hub): 10 m
  • Power supply: via battery 3 V DC, CR2450
  • Battery lifespan: 5 years at 20 actuations/day
  • Antenna: integrated antenna
  • Humidity: 0 – 95 % relative humidity, non-condensing
  • Maximum per installation:
    • max. 50 connected Zigbee® devices per Niko Home Control installation
    • stand-alone: max. 8 Zigbee® receivers (ON/OFF/dimming) per switch
  • Ambient temperature operation: 5 °C – 30 °C
  • Ambient temperature storage: 0 °C – 40 °C
  • Compatible with the wireless bridge
  • Communication protocol: Zigbee® 3.0
  • Maximum radio frequency power: 8 dBm
  • Operating frequency: 2.4 GHz
  • System compatibility: talks with Homey
  • Protection degree: IP20
  • Required type of flush-mounting box
    • depth: min. 40 mm (cabling space included)
    • claw/screw fixing: 60 mm
    • inner diameter box: 60 mm
    • multiple boxes centre distance horizontal: 71 mm
    • multiple boxes centre distance vertical: 71 mm
    • multiple boxes centre distance vertical: 60 mm for Belgium and France
  • Dimensions (HxWxD): 45 x 47 x 9 mm
  • Weight: 17 g
  • Certification marks: Zigbee Certified Product
  • Marking: CE

Finishing set for double electronic switch or push button, cream

Reference code
100-31004

Finishing set for double electronic switch or push button, cream

  • 100-31004
    Colour cream
    Reference code 100-31004
  • 101-31004
    Colour white
    Reference code 101-31004
  • 102-31004
    Colour light grey
    Reference code 102-31004
  • 121-31004
    Colour sterling
    Reference code 121-31004
  • 122-31004
    Colour anthracite
    Reference code 122-31004
  • 123-31004
    Colour bronze
    Reference code 123-31004
  • 124-31004
    Colour dark brown
    Reference code 124-31004
  • 154-31004
    Colour white coated
    Reference code 154-31004
  • 157-31004
    Colour champagne coated
    Reference code 157-31004
  • 161-31004
    Colour black coated
    Reference code 161-31004
  • 200-31004
    Colour piano black coated
    Reference code 200-31004
  • 220-31004
    Colour steel grey coated
    Reference code 220-31004
  • 221-31004
    Colour gold coated
    Reference code 221-31004

Related products

Wireless battery-powered switch, onefold, Zigbee®

This onefold wireless battery-powered Zigbee® switch allows you to remotely control wireless Zigbee® devices. It can either be used in your Niko Home Control installation or connected to a third-party Zigbee® network as a standard dimmer switch via Find&Bind pairing. Moreover, the switch can be paired with up to eight Zigbee® receivers for stand-alone use via Touchlink. It is battery-powered with a lifetime of at least five years, based on twenty short-press actuations a day. The wireless Zigbee® switch is mounted on a plastic base. The set (base + switch 552-72001) can be screwed on a wall (screws excluded) or glued to a flat surface with double-sided adhesive tape (included). If you want to install the onefold wireless battery-powered Zigbee® on a flush-mounting box, order the variant without plastic baseplate (552-72011). Combine it with a metal baseplate (552-720X0) instead. The single key and faceplate must be ordered separately. This onefold wireless battery-powered Zigbee® switch combines with any Niko Pure, Niko Intense and Niko Original faceplate in the colour of your choice. For best performance, follow the installation and radio planning guidelines. The wireless battery-powered switch can be connected wirelessly to the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640).

Connected switching socket outlet for Niko Home Control with pin earthing and shutters, Zigbee®

The connected switching socket outlet communicates wirelessly with the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation with the wireless bridge for Niko Home Control (550-00640). In combination with the smart hub or wireless bridge, it can be connected to a wireless switch without additional wiring. Moreover, the plugged-in device can be linked to handy routines such as an all-off/all-on function or calendar functions and controlled remotely via the Niko Home app. In addition, its built-in consumption measurement helps you to save energy as you can consult the plugged-in device’s energy data via the Niko Home app. Use the connected switching socket outlet within the routines ‘peak mode’ and ‘solar mode’ to optimise your energy production and consumption. Note that it can also be used stand-alone as a conventional socket outlet. It is fitted with a standard built-in overtemperature and overcurrent protection to ensure complete safety.

Connected single switch, 10 A, Zigbee®

The connected single Zigbee® switch has a switching contact to switch lighting. It contains a transmitter and receiver that can communicate wirelessly with the wireless smart hub for Niko Home Control (552-00001). You can use the connected single switch to replace a conventional switch. It is equipped with an extension terminal so that, in combination with a conventional push button, it can easily replace multiway or intermediate switching. The connected single switch can switch its own contact. Once connected to the wireless smart hub for Niko Home Control (552-00001), it is possible to configure additional functionalities with the Niko Home Control programming software. For example, you can add the switch to a scene or all-off function. This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640). It is possible to disconnect the control from its built-in contact. That way, you have complete flexibility to configure the switching contact and the controls separately via the programming software.

Favorites ( 0 )