Modular power supply 24 Vdc, 2,5 A, 60 W
Description
This power supply is suitable for DIN-rail mounting. It has a power supply of 60 W. This power supply conforms to the European directive for EMC and safety.
Specification description
Modular power supply 24 Vdc, 2,5 A, 60 W.
- Average active efficiency: 89%
- Efficiency at low load (10%): 85%
- Maximum MCB rating: 6 A (limited by national installation rules)
- Maximum load: 60 W
- Primary wire connection: double primary terminal connection: 1 x 2.5 mm² per screw terminal
- Secondary wire connection: Fourfold secondary terminal connection: 1 x 2.5 mm² or 2 x 1.5 mm² per screw terminal
- Protection degree: IP20
- Safety protections: self-resetting, built-in protection against short-circuit, overload and overheating
- Protection class: Class II device: SELV (safety extra low voltage), independent device
- Usage: for indoor use only
- DIN dimensions: 3U
- Dimensions (HxWxD): 90 x 52.5 x 55 mm
- Marking: CE
- Weight: 453 g
Related products:
Niko Home Control touchscreen
This touchscreen allows you to conveniently operate the entire Niko Home Control installation from one central point: switching and dimming the lighting, controlling the temperature, moving roller blinds and sunblinds to the position of your choice, monitoring the energy consumption and the status of the installation … Thanks to a built-in light sensor, the screen brightness adapts to the ambient light. Thanks to the connection to the Niko Home Control external video unit, access control is also possible from now on. This way, you can answer incoming calls if you wish, and check missed calls. A feedback LED displays any missed calls, even when the device is in stand-by mode. This new touchscreen (550-20102) entirely replaces the touchscreen 2 (550-20101). In an existing Niko Home Control installation, it can both replace and complement this touchscreen. Furthermore, its wired connection to the home network ensures a permanent connection. Only one flush-mounting box is needed to mount the touchscreen. You connect the touchscreen with one twisted pair cable (UTP, FTP or STP) to the Power over Ethernet power supply (PoE), which is available separately. Alternatively, you can also place a separate 24Vdc power supply in the cabinet. A total of ten IP devices (touchscreens, smartphone or PC applications) can be connected per installation. This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.
Power supply for touchscreen (not compatible with the 1st generation touchscreen)
This Power-over-Ethernet power supply ensures that the touch screen can also be supplied with power via one UTP/STP cable. This offers an alternative to laying a second power supply cable for the touchscreen. This power supply is not compatible with the 1st generation Niko Home Control touchscreen (550-20100).
