! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Transformers

Are you using 12 V energy efficient lamps? Then you will need transformers which will convert 230 V to 12 V.

For powers up to 150 W you can use electronic transformers, placed close to the lamp. It's ideal for small spaces. Our electronic transformers are protected against short circuiting, overloading and overheating.

For higher powers up to 400 W, ferromagnetic transformers are the best choice. You can place these further away from the lamp. This is ideal for large spaces.

Filters

How dust- and waterproof should the detector be?
The higher the IP degree, the better the protection. The first digit indicates the level of dust protection, the second digit indicates the level of water protection.

Electronic 70 W transformer, terminal PRI and SEC

This universal dimmable electronic transformer (70 W) is used for the connection of low-voltage loads (12 V - SELV). This transformer is very compact and therefore very suitable for connection in small spaces. Strain relief is ensured with the easy-to-install click cap. Two loads can be easily connected to the two secondary outputs, and the two primary inputs make interconnection easy (max. 8x). CE marking, CEBEC and ENEC approved.

Electronic 105 W transformer, terminal PRI and sec

This universal dimmable electronic transformer (105 W) is used for the connection of low-voltage loads (12 V - SELV). This transformer is very compact and therefore very suitable for connection in small spaces. Strain relief is ensured with the easy-to-install click cap. The transformer is equipped with screw terminals on both the primary and the secondary sides. Two loads can be connected to the two secondary outputs. The two primary inputs make interconnection easy (max. 8x). CE marking, CEBEC and ENEC approved.

Electronic 150 W transformer, terminal PRI and sec

This universal dimmable electronic transformer (150 W) is used for the connection of low-voltage loads (12 V - SELV). This transformer is very compact and therefore very suitable for connection in small spaces. Strain relief is ensured with the easy-to-install click cap. The transformer is equipped with screw terminals on both the primary and the secondary sides. Up to four loads (4 x 35 W or 3 x 50 W) can be easily connected to the 4 secondary outputs. The 2 primary inputs make interconnection easy (max. 8 times). CE marking; CEBEC and ENEC approved.

Electronic 70 W transformer, wire PRI and SEC, IP68

This universal dimmable electronic transformer (70 W) is used for the connection of low-voltage loads (12 V - SELV). This transformer is very compact and therefore very suitable for connection in small spaces. The transformer has an IP68 protection degree, is dustfree and jetproof. It is exceptionally suited for installation in damp rooms such as bathrooms and kitchens. The cables are fixed with resin. On the primary side, the transformer is equipped with a rubber cable that can be connected to a mini-connection box. This guarantees a quick and correct connection. The silicone wire on the secondary side is directly connected with a spotlight. CE marking, CEBEC and ENEC approved.

Electronic 105 W transformer, wire PRI and SEC, IP65

This universal dimmable electronic transformer (105 W) is used for the connection of low-voltage loads (12 V - SELV). This transformer is very compact and therefore very suitable for connection in small spaces. It has an IP65 protection degree, is dustfree and jetproof. The transformer is exceptionally suited for installation in damp rooms such as bathrooms and kitchens. The cables are fixed with resin. On the primary side, the transformer is equipped with a rubber cable. This cable can be connected to a mini-connection box. This guarantees a quick and correct connection. The silicone wire on the secondary side is directly connected with a spotlight. CE marking, CEBEC and ENEC approved.

Electronic 150 W transformer, wire PRI and SEC, IP65

This universal dimmable electronic transformer (150 W) is used for the connection of low-voltage halogen loads (12 V - SELV). The transformer has an IP65 protection degree, is dustfree and jetproof. It is exceptionally suitable for installation in damp rooms such as bathrooms and kitchens. The cables are fixed with resin. On the primary side, the transformer is equipped with a rubber cable. This cable can be connected to a mini-connection box , which guarantees a quick and correct connection. The silicone wire on the secondary side is directly connected with a spot light. CE marking and ENEC approved.

Compact electronic 70 W transformer, wire PRI and sec

This universal dimmable electronic transformer (70 W) is used for the connection of low-voltage loads (12 V - SELV). On the primary side, the transformer is equipped with a double insulated wire. This wire can be connected to a mini connection box which guarantees a quick and correct connection. The silicon wire on the secondary side can be directly connected to a spotlight. Both wires are on the side of the transformer for an easy installation. This transformer is very compact and therefore highly suitable for installations in small spaces. CE marking and ENEC approved.

Compact electronic 105 W transformer, wire PRI and SEC

This universal dimmable electronic transformer (105 W) is used for the connection of low-voltage loads (12 V - SELV). On the primary side, the transformer is equipped with a double insulated wire. This wire can be connected to a mini connection box which guarantees a quick and correct connection. The silicon wire on the secondary side can be directly connected to a spotlight. Both wires are on the side of the transformer for an easy installation. This transformer is very compact and therefore highly suitable for installations in small spaces. CE marking and ENEC approved.

Compact cast resin electronic 70 W transformer, wire PRI and sec

This universal dimmable electronic transformer (70 W) is used for the connection of low-voltage loads (12 V - SELV). The cables are fixed by means of resin. On the primary side, the transformer is equipped with a double insulated wire. This wire can be connected to a mini connection box which guarantees a quick and correct connection. The silicon wire on the secondary side can be directly connected to a spotlight. This transformer is very compact and therefore highly suitable for installations in small spaces. CE marking and ENEC approved.

Compact cast resin electronic 70 W transformer, wire PRI and SEC, round

This universal dimmable round electronic transformer (70 W) is used for the connection of low-voltage loads (12 V - SELV). The cables are fixed by means of resin. On the primary side, the transformer is equipped with a double insulated wire. This wire can be connected to a mini connection box which guarantees a quick and correct connection. The silicon wire on the secondary side can be directly connected to a spotlight. This transformer is very compact and, thanks to its round shape, can be easily concealed when working with spotlights. CE marking and ENEC approved.

Compact cast resin electronic 70 W transformer, wire PRI and SEC, flat

This universal dimmable flat electronic transformer (70 W) is used for the connection of low-voltage loads (12 V - SELV). The cables are fixed by means of resin. On the primary side, the transformer is equipped with a double insulated wire. This wire can be connected to a mini connection box which guarantees a quick and correct connection. The silicon wire on the secondary side can be directly connected to a spotlight. This transformer is very compact and, thanks to its shape, is highly suitable for installation in small spaces. CE marking.

Compact cast resin electronic 105 W transformer, wire PRI and SEC, flat

This universal dimmable flat electronic transformer (105 W) is used for the connection of low-voltage loads (12 V - SELV). The cables are fixed by means of resin. On the primary side, the transformer is equipped with a double insulated wire. This wire can be connected to a mini connection box which guarantees a quick and correct connection. The silicon wire on the secondary side can be directly connected to a spotlight. This transformer is very compact and, thanks to its shape, is highly suitable for installation in small spaces. CE marking.

Compact cast resin electronic 70 W transformer, wire PRI and SEC, cylindrical

This universal dimmable electronic transformer (70 W) is used for the connection of low-voltage loads (12 V - SELV). The cables are fixed by means of resin. On the primary side, the transformer is equipped with a double insulated wire. This wire can be connected to a mini connection box which guarantees a quick and correct connection. The silicon wire on the secondary side can be directly connected to a spotlight. This transformer is very compact and, thanks to its shape, is highly suitable for installation in small spaces. CE marking and ENEC approved.

Ferromagnetic 35 W transformer with wire output, IP40

This ferromagnetic transformer (35 W) is used for the connection of low-voltage loads (12 V - SELV). On the primary side, the transformer is equipped with a double-insulated wire with cord end terminals that can be connected to a mini-connection box . This guarantees a quick and correct connection. The silicone wire on the secondary side is directly connected with the load. CE marking, CEBEC and ENEC approved. In compliance with the safety directive EN60669-2-1.

Ferromagnetic 35 W transformer with terminal connections

This ferromagnetic transformer (35 W) is used for the connection of low-voltage loads (12 V - SELV). Both the primary and the secondary side of the transformer are equipped with two screw terminals for wire with a diameter of 6 mm². CE marking; CEBEC and ENEC approved.

Short circuit-resistant ferromagnetic 105 W block transformer (terminal connections)

This short circuit-resistant ferromagnetic transformer (105 W) is used for the connection of low-voltage loads (12 V - SELV). The transformer is equipped with a built-in, resettable protection. On the primary side, the transformer is equipped with two screw terminals and on the secondary side with four screw terminals for wire with a diameter of 4 mm². Incl. attachment brackets. CE marking. Complies with the EN 61558-2-6 safety standard.

Ferromagnetic 150 W block transformer (terminal connections)

This ferromagnetic transformer (150 W) is used for the connection of low-voltage loads (12 V - SELV). On the primary side, the transformer is equipped with two screw terminals and on the secondary side with four screw terminals for wire with a diameter of 4 mm². Incl. attachment brackets. CE marking. Complies with the EN 61558-2-6 safety standard.

Ferromagnetic 200 W block transformer (terminal connections)

This ferromagnetic transformer (200 W) is used for the connection of low-voltage loads (12 V - SELV). On the primary side, the transformer is equipped with two screw terminals and on the secondary side with four screw terminals for wire with a diameter of 4 mm². Incl. attachment brackets. CE marking. Complies with the EN 61558-2-6 safety standard.

Ferromagnetic 300 W block transformer (terminal connections)

This ferromagnetic transformer (300 W) is used for the connection of low-voltage loads (12 V - SELV). On the primary side, the transformer is equipped with two screw terminals for wire with a diameter of 6 mm²; on the secondary side with four screw terminals for wire with a diameter of 6 mm². CE marking. Complies with the EN 61558-2-6 safety standard.