Orientation lighting with warm white LEDs
This orientation lighting with warm white LEDs in Niko Invisible design discreetly adds visibility in hallways or along staircases where step lights or corridor lighting are needed.
Product details
Orientation lighting with warm white LEDs, Niko Invisible, anthracite coated
This orientation lighting with warm white LEDs in Niko Invisible design discreetly adds visibility in hallways or along staircases where step lights or corridor lighting are needed.
The LED offers four levels of light intensity: off (0), a faint glow that is just visible in the dark but doesn’t disturb sleeping, for use in bedrooms (1), a brighter glow that is visible in normally lit rooms like a living room (2) and a bright glow that subtly lights up the surrounding area (3 – default setting).
A professional can customise the finishing set to coordinate with or blend into its surrounding surface for an ultra-minimalist look. It can be covered with any wallpaper and paint colour or furniture surface. And thanks to its enamelled finishing in the colour anthracite coated, you can even use it without any covering.
Dedicated Niko Invisible installation kits are available for brickwork and plasterboard, as well as a hole saw that facilitates application in plasterboard surfaces.
Related products
Wireless 4-channel constant voltage controller
The 4-channel controller is suitable for controlling LED strips (constant voltage, common anode) from 12 to 24 Vdc. The controller has a maximum power of 50 W per channel for 12 Vdc LED strips and of 100 W per channel for 24 Vdc LED strips. The controller can control the following types of LED strips: RGB, RGBW, tunable white and monochrome. We recommend using the specifically designed RGB(W) wall controller in four button mode (article numbers 410-00002 + XXX-90002) for controlling the colour LED strips.
DIN rail power supply for LED strips, 24 Vdc, 100 W
The power supply is suitable for DIN rail mounting. The power supply is equipped with a primary input and four secondary terminals to connect two loads. Usage of screw terminals, both at primary and at secondary side. The output power range is adjustable. In compliance with the European directives for EMC and safety
DIN rail power supply for LED strips, 24 Vdc, 2.5 A/60 W
The 60 W power supply is suitable for DIN rail mounting. The power supply is equipped with a primary input and four secondary terminals to connect two loads. Usage of screw terminals, both at primary and at secondary side. The output power range is adjustable.
