! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

DIN rail power supply for LED strips, 24 Vdc - 100 W

The power supply is suitable for DIN rail mounting. The power supply is equipped with a primary input and four secondary terminals to connect two loads. Usage of screw terminals, both at primary and at secondary side. The output power range is adjustable. In compliance with the European directives for EMC and safety

Product details

This product consists of several components. Below you will find an overview of all the component parts.
Technical datasheets
Technical manuals
Certificaten CE-Marking

Modular power supply 24 V DC, 100 W

Reference code

This power supply is suitable for DIN-rail mounting. It has a power supply of 100 W. This power supply conforms to the European directive for EMC and safety.

Specification description

Modular power supply 24 V DC, 100 W.

  • Maximum load: 100 W
  • Primary wire connection: double primary terminal connection: 1 x 2.5 mm² or 2 x 1.5 mm² per screw terminal
  • Secondary wire connection: Fourfold secondary terminal connection: 1 x 2.5 mm² or 2 x 1.5 mm² per screw terminal
  • Protection degree: IP20
  • Safety protections: self-resetting, built-in protection against short-circuit, overload and overheating
  • Protection class: Class II device: SELV (safety extra low voltage), independent device
  • Usage: for indoor use only
  • DIN dimensions: DIN 4TE
  • Dimensions (HxWxD): 90 x 70 x 55 mm
  • Marking: CE
  • Weight: 452 g

Related products

Wireless 4-channel constant voltage controller

The 4-channel controller is suitable for controlling LED strips (constant voltage, common anode) from 12 to 24 Vdc. The controller has a maximum power of 50W per channel for 12Vdc LED strips and of 100W per channel for 24Vdc LED strips. The controller can control the following types of LED strips: RGB, RGBW, tunable white and monochrome. We recommend using the specifically designed RGB(W) wall controller in 4-button mode (article numbers 410-00002 + xxx-90002) for controlling the colour LED strips.

PWM dimmer, 100 W

The PWM dimmer will be used to dim LED strips with monochrome LEDs, up to a maximum capacity of 100 W. The light intensity is dimmed linearly by using an NO push button. Press the NO push button briefly for switching on and off, and hold it down for brightening and dimming the light. Replaces 340-10027 and 340-10028.

Power supply for LED strips, 24 Vdc - 60 W - IP67

The 60W power supply is suitable for supplying power to LED strips. This power supply has an IP67 protection degree, is dust-free and waterjet proof. As a result, it is extremely well-suited for installation in a damp room, such as a bathroom or kitchen. The cables are fixed with resin.

Favorites ( 0 )