! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Presence detector, 230 V, secondary, 14 m, round, for flush-mounting box

The presence or absence detector for flush mounting in ceilings is suitable for switching the indoor lighting on and off. Automatic on/off (presence detector) or manual on/automatic off (absence detector). The detection area can be divided by means of an adjustable cover mask. Use exclusively in combination with a Master (351-25451/56/57/63/66/67).

Product details

This product consists of several components. Below you will find an overview of all the component parts.

Presence detector, 230 V, secondary, 14 m, round, for flush-mounting box, white

Reference code
351-25459

The presence or absence detector for flush mounting in ceilings is suitable for switching the indoor lighting on and off. Automatic on/off (presence detector) or manual on/automatic off (absence detector). The detection area can be divided by means of an adjustable cover mask. Use exclusively in combination with a master.

Finishing colour: white

Compatible master detectors: 351-25451, 351-25457, 351-25463, 351-25467, 351-25475, 351-26001, 351-26002, 351-26003, 351-26004

Specification description

Presence detector, 230 V, secondary, 14 m, round, for flush-mounting box, white.

  • Input voltage: 230 Vac ± 10 %, 50 Hz
  • Detector output: 230 V (ON/OFF)
  • Maximum MCB rating: 10 A (limited by national installation rules)
  • Detection angle: 360 °
  • Detection range (PIR): ø 14 m from a height of 3 m
  • Ambient temperature: -20 – +40 °C
  • Mounting method: flush-mounting box
  • Drill diameter: 48 mm
  • Mounting height: 2 – 6 m
  • Usage: for indoor use only
  • Dimensions (HxWxD): 105 x 105 x 71 mm
  • Dimensions visible (HxWxD): 105 x 105 x 35 mm
  • Protection degree: IP20
  • Protection class: Class II device
  • Marking: CE

Accessories

Technical datasheets
Certificaten CE-Marking

Surface-mounting box, white

Reference code
351-25420

Compatible articles: 351-25065, 351-25340, 351-25457, 351-25459, 351-25463, 351-25467, 351-25469, 351-26002, 351-26004

Specification description

Surface-mounting box, white

Related products

Motion detector, 230 V, 12 m, 200°, IP55, for wall and ceiling mounting, for surface mounting

This outdoor motion detector with a detection range of 14 metres is suitable for use along driveways, under carports or in the garden. The motion detector can be mounted onto the ceiling or the wall and can be aimed upwards, downwards, left and right. The device has a built-in light sensor and switches the lighting automatically. After the pre-set time delay, the light is switched off automatically. The detector can be configured both manually and by remote control.

Motion detector, 230 V, 16 m, 180°, IP54, for surface mounting

The outdoor motion detector with one channel to be surface mounted on a wall or partition is suitable for use on driveways and in gardens. Equipped with an integrated light sensor. Automatic on/off (after switch-off delay) or manual on/off via an NC push button (to be ordered separately). The detection area can be divided by means of an adjustable cover mask. In conformity with the European directive for EMC and safety EN60669-2-1.

Motion detector, 230 V, 13 m, 180°, IP54, for surface mounting

The outdoor motion detector with one channel to be surface mounted on a wall or partition is suitable for use on driveways and in gardens. Equipped with an integrated light sensor. Automatic on/off (after switch-off delay) or manual on/off via an NC push button (to be ordered separately). The detection area can be divided by means of an adjustable cover mask. In conformity with the European directive for EMC and safety EN60669-2-1.

Favorites ( 0 )