Motion detector, KNX®, 5 channels, 32 m, IP55, for surface mounting
The outdoor motion detector with five channels is suitable for KNX® systems. It can be surface mounted on walls or ceilings and is easy to install thanks to the plug-in terminals. The detector can also be used for indoor applications.
Product details
Motion detector, KNX®, 5 channels, 32 m, IP55, for surface mounting, white
The outdoor motion detector with five channels is suitable for KNX® systems. It can be surface mounted on walls or ceilings and is easy to install thanks to the plug-in terminals. The detector can also be used for indoor applications. In conformity with the European directive for EMC and safety EN 60669-2-1.
Finishing colour: white
Specification description
Motion detector, KNX®, 5 channels, 32 m, IP55, for surface mounting, white.
- KNX motion detector for outdoor use
- Also suitable for indoor daylight control, HVAC and alarm functionalities
- Wall or ceiling mounting
- Corner mounting bracket (available as accessory)
- Easy installation with plug-in terminals
- Adjustable sensor head - right/left 90°, up 90°, down 40°
- Two sensitivity zones: frontal and below
- Pulse algorithm prevents false triggering by trees or other objects
- Master/secondary configuration
- 2 channels for on/off or dimming
- 2 channels for HVAC
- 1 channel for alarm
- Two separate light levels (orientation light level and normal light level)
- Commissioning via ETS software or IR-remote control (available as accessory)
Technical data
- Detector technology: PIR
- Input voltage: 30 Vdc via KNX®-bus
- Detector output: KNX®
- Maximum current consumption: 10 mA
- Number of channels: 5 channels
- Light intensity range: 5 lux – 2000 lux, ∞
- Switch-off delay: 5 s – 1 h, ∞
- Activation delay: 1 s
- Detection angle: 360°
- Detection range (PIR): ø 32 m from a height of 2.5 m
- Ambient temperature: -20 – +50 °C
- Mounting method: surface mounting
- Mounting height: 2 – 3 m
- Usage: for outdoor and indoor use
- Colour: white (approximately RAL 9010)
- Dimensions (HxWxD): 84 x 90 x 150 mm
- Protection degree: IP55
- Protection class: Class II device
- Marking: CE
Accessories
IR remote control
Compatible articles: 350-213001
Specification description
IR remote control
- Dimensions (HxWxD): 102 x 50 x 5 mm
- Marking: CE
Corner-mounting bracket, white
Compatible articles: 350-213001
Specification description
Corner-mounting bracket, white
- Dimensions (HxWxD): 74.5 x 80 x 25 mm
- Marking: CE
Related products
Niko dimmer switch, Bluetooth®
With this wireless and battery-free dimmer switch in Niko design, you can remotely operate Bluetooth® low energy 2.4 GHz wireless receivers that are located in the same room (e.g. presence and motion detectors with a Bluetooth® interface or smart lighting with integrated Bluetooth® technology from Casambi® or Xicato®). For best performance, follow the installation and radio planning guidelines. Configure the dimmer switch buttons with the respective smart lighting smartphone app or software app (e.g. Niko detector tool app, Casambi app, Xicato Control Software, SylSmart Standalone app...). Up to four buttons can be configured. No wall breaking or cable installation is needed. The dimmer switch can be mounted in a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive tape (included).
Presence detector P48MR, DALI-2, master, 12-13 m, for flush mounting (SnapFit)
This flat and discrete presence detector is a DALI-2 master for DALI lighting control in up to 4 zones. The detector is fitted with multiple functions and can be controlled wirelessly by push buttons. The SnapFit mounting bracket ensures a quick and stable mounting in all types of suspended ceilings with or without removable tiles. The lighting zones are defined during commissioning, using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector.
Presence detector P48LR, DALI-2, master, 32-37 m, for flush mounting (SnapFit)
This presence detector is a DALI-2 master for DALI lighting control in up to 4 zones. The detector is fitted with multiple functions and can be controlled wirelessly using push buttons. The SnapFit mounting bracket ensures a quick and stable mounting in all types of suspended ceilings with or without removable tiles. The lighting zones are defined during commissioning, using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector.
