Motion detector, 230 V, 8 m, 180°, wall detector, for flush-mounting box
This motion detector is used for LED, economy lamps, 230 V halogen lamps, low voltage halogen lamps and fluorescent lamps. For indoor use only.
Product details
Motion detector, 230 V, 8 m, 180°, wall detector, for flush-mounting box, cream
With this integrated indoor motion detector with a 10 A, 230 V switching contact, you have a viewing angle of 180° (horizontal) and 60° (vertical) within which all movement is detected. When a motion is detected, pre-selected lights are activated.
Finishing colour: cream
Compatible secondary detectors: XXX-78010
Motion detector, 230 V, 8 m, 180°, wall detector, for flush-mounting box, cream
With this integrated indoor motion detector with a 10 A, 230 V switching contact, you have a viewing angle of 180° (horizontal) and 60° (vertical) within which all movement is detected. When a motion is detected, pre-selected lights are activated.
Finishing colour: cream
Compatible secondary detectors: XXX-78011
Related products
Motion detector, 230 V, 12 m, 200°, IP55, for wall and ceiling mounting, for surface mounting
This outdoor motion detector with a detection range of 14 metres is suitable for use along driveways, under carports or in the garden. The motion detector can be mounted onto the ceiling or the wall and can be aimed upwards, downwards, left and right. The device has a built-in light sensor and switches the lighting automatically. After the pre-set time delay, the light is switched off automatically. The detector can be configured both manually and by remote control.
Motion detector, 230 V, 16 m, 180°, IP54, for surface mounting
The outdoor motion detector with one channel to be surface mounted on a wall or partition is suitable for use on driveways and in gardens. Equipped with an integrated light sensor. Automatic on/off (after switch-off delay) or manual on/off via an NC push button (to be ordered separately). The detection area can be divided by means of an adjustable cover mask. In conformity with the European directive for EMC and safety EN60669-2-1.
Motion detector, 230 V, 13 m, 180°, IP54, for surface mounting
The outdoor motion detector with one channel to be surface mounted on a wall or partition is suitable for use on driveways and in gardens. Equipped with an integrated light sensor. Automatic on/off (after switch-off delay) or manual on/off via an NC push button (to be ordered separately). The detection area can be divided by means of an adjustable cover mask. In conformity with the European directive for EMC and safety EN60669-2-1.
