Motion detector, 230 V, 40 m, for corridors, for flush-mounting box
The one channel corridor motion detector is suitable for automatic indoor lighting control (on/off). It can be installed in a flush-mounting box in the ceiling. Flush-mounting box with springs and an IP54 surface-mounting box can be ordered separately. In conformity with the European directive for EMC and safety EN60669-2-1.
Product details
Motion detector, 230 V, 40 m, for corridors, for flush-mounting box, white
The one channel corridor motion detector is suitable for automatic indoor lighting control (on/off). It can be installed in a flush-mounting box in the ceiling. A flush-mounting box with spring clips and an IP54 surface-mounting box can be ordered separately. In conformity with the European directive for EMC and safety EN60669-2-1.
Finishing colour: white
Specification description
Motion detector, 230 V, 40 m, for corridors, for flush-mounting box, white.
- Detector technology: PIR
- Input voltage: 230 Vac ± 10 %, 50 Hz
- Detector output: 230 V (ON/OFF)
- Maximum power consumption: 0.5 W
- Maximum MCB rating: 10 A (limited by national installation rules)
- Number of channels: 1 channel
- Light intensity range: 10 lux – 2000 lux, ∞
- Switch-off delay: pulse, 30 s – 30 min
- Activation delay: 1 s
- Detection angle: 360 °
- Detection range (PIR): 40 m from a height of 2.5 m
- Ambient temperature: -20 – +40 °C
- Mounting method: flush-mounting box
- Mounting height: 2 – 3 m
- Relay contact: N.O. (max. 10 A)
- Maximum load incandescent and halogen lamps (cosφ=1): 2300 W
- Maximum load fluorescent lamps (cosφ ≥ 0.5): 1200 VA
- Maximum load low voltage halogen lamps: 1200 W
- Maximum load economy lamps (CFLi): 800 W
- Maximum load LED lamps 230 V: 300 W
- Maximum load LED driver: 800 VA
- Maximum capacitive load: 140 µF
- Colour: white (approximately RAL 9010)
- Dimensions (HxWxD): 105 x 105 x 60 mm
- Dimensions visible (HxWxD): 105 x 105 x 38 mm
- Protection degree: IP20
- Protection class: Class II device
- Marking: CE
Accessories
Flush-mounting box with spring clips
Compatible articles: 350-100111, 350-500111, 350-530311
Specification description
Flush-mounting box with spring clips
- Drill diameter: 68 mm
IP54 surface-mounting box, white
Compatible articles: 350-100111, 350-500111, 350-530311
Specification description
IP54 surface-mounting box, white
IR remote control
The IR remote control is used to control and configure Niko detectors.
Compatible articles: 350-41750, 350-500111, 351-25050, 351-25065, 351-25340, 351-25451, 351-25457, 351-25463, 351-25467, 351-25475, 351-25480, 351-26450, 351-26470, 351-26480, 351-26560, 351-26562, 351-26570, 351-26572
Specification description
IR remote control
Related products
Motion detector, 230 V, 12 m, 200°, IP55, for wall and ceiling mounting, for surface mounting
This outdoor motion detector with a detection range of 14 metres is suitable for use along driveways, under carports or in the garden. The motion detector can be mounted onto the ceiling or the wall and can be aimed upwards, downwards, left and right. The device has a built-in light sensor and switches the lighting automatically. After the pre-set time delay, the light is switched off automatically. The detector can be configured both manually and by remote control.
Motion detector, 230 V, 16 m, 180°, IP54, for surface mounting
The outdoor motion detector with one channel to be surface mounted on a wall or partition is suitable for use on driveways and in gardens. Equipped with an integrated light sensor. Automatic on/off (after switch-off delay) or manual on/off via an NC push button (to be ordered separately). The detection area can be divided by means of an adjustable cover mask. In conformity with the European directive for EMC and safety EN60669-2-1.
Motion detector, 230 V, 13 m, 180°, IP54, for surface mounting
The outdoor motion detector with one channel to be surface mounted on a wall or partition is suitable for use on driveways and in gardens. Equipped with an integrated light sensor. Automatic on/off (after switch-off delay) or manual on/off via an NC push button (to be ordered separately). The detection area can be divided by means of an adjustable cover mask. In conformity with the European directive for EMC and safety EN60669-2-1.
