Base for a fourfold push button, with LEDs and comfort sensors, 60 x 71 mm, claw fixing, Niko Home Control

Base for a fourfold push button for Niko Home Control II installations on bus wiring. Each push-button contact can be configured individually to activate devices, actions or routines via the Niko Home Control programming software (as of version 2.25). It is fitted with programmable LEDs that provide feedback on the action.

Thanks to its integrated temperature and humidity sensor, this base also supports multi-zone climate and ventilation control, increasing your energy efficiency and comfort.

- Its multi-purpose temperature sensor can be set to control a heating/cooling zone within a Niko Home Control II installation, as a basic thermometer, or to create certain conditions (e.g. control sunscreens)

- The humidity sensor can also be used within routines, for example, to perform automatic ventilation control in a bathroom or toilet

The base is equipped with four removable connectors with four plug-in terminals per connector to enable daisy chaining. These connectors can be detached from the base to allow easy installation. The base is installed using claw fixing, in a flush-mounting box with a depth of at least 40 mm.

This base can be used with the Niko Rocker and Niko Toggle design range for Niko Home Control (xxx-46xxx and xxx-47xxx). Finishing parts in the colour of your choice must be ordered separately. Each Niko Rocker or Niko Toggle controls two push button contacts, so you can click two Rocker parts or two Toggle parts (one set) on this base. You can combine multiple bases, depending on the available faceplates.

Base for a fourfold push button, with LEDs and comfort sensors, 60 x 71 mm, claw fixing, Niko Home Control.

• Function: – Combine the push button’s temperature sensor with a heating or cooling module for multi-zone control or a switching module for electrical heating
  • Combine its integrated humidity sensor with a ventilation module to perform automatic ventilation control
  • Setpoints and week programmes are managed via the app
  • Calibration is managed via the programming software
  • Maximum number of push buttons set as a temperature sensor per installation: 20
  • Temperature sensor range: 0 – 40°C
  • Temperature sensor accuracy: ± 0.5°C
  • Humidity sensor range: 0 – 100 % RH (non-condensing, nor icing)
  • Humidity sensor accuracy: ± 5 %, between 20 – 80 % RH at 25°C
• Number of control buttons: The base and the two LED lighting strips of the fourfold, potential-free push button are made of polycarbonate. In addition to the 4 control buttons (upper left and right and lower left and right), the mechanism is equipped in the middle on the front with snap hooks which hold the two keys and a finishing plate (with or without text field) in place. In addition, the mechanism is also equipped with two LED lighting strips. When the LEDs are connected, the 2 uppermost and the 2 lowermost standing studs are illuminated. The LEDs can be connected as indicators or as feedback.
• LED colour: multicolour
• Protection degree: IP40 for the combination of a mechanism and faceplate
• Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact resistance of IK06
• Flush-mounting frame
  • 1 mm-thick metal
  • galvanized on all sides after cutting, even on the cut edges
  • with 4 grooves with screw hole of 7 mm
  • with 4 screw holes (indicated by a screw symbol) with a diameter of 3 mm for mounting on panels
• Fixing method
  • simple mounting in a flush-mounting box with grip surfaces
  • with claws that rotate open using screws with a combination screwhead (Pz1 or slot 1 x 5 mm), for mounting in a flush-mounting box with grip surfaces
  • engagement depth of claws: 31 mm
  • claws can be pushed back into their original position
  • claws can be easily pushed out using a screwdriver
• Centre-to-centre distance
  • Simple and quick assembly of one or more mechanisms by the indication (chalk line, laser, etc.) of the centre of the flush-mounting frame
  • vertical coupling centre-to-centre distance 60 mm by sliding several bases into each other, they lock themselves automatically
  • vertical coupling centre-to-centre distance 71 mm using pre-formed lips at the bottom, by folding the lips downwards over a length of 1 mm, the bases support each other and the centre-to-centre distance is guaranteed.
  • horizontal connection of multiple bases is quick and perfect thanks to the folded-up dovetails on the left and right sides
  • extra robustness due to the folded-up edges on the outside of the base and the continuation into the inside of the base
• End border: The flush-mounting frame is equipped, both on the top and the bottom, with a dark grey, plastic end border. This border is made of PC+ASA and is joined to the flush-mounting frame using a melting process. The corners of the two end borders are equipped with rectangular openings (7.9 x 1.5 mm) each containing a multi-positional snap hook. Thanks to the snap hooks, the 4 rectangular openings ensure that the faceplate can always be attached flat to the wall, even in cases of untidy plasterwork. This works in two directions: If the flush-mounting box sticks out of the plasterwork, the multi-positional snap hooks can compensate for a 1 to 1.2 mm margin; if the flush-mounting box is sunk too deeply in the plasterwork, the snap hooks can compensate for up to a 1.8 mm margin. The end borders also have 4 round openings that ensure the correct positioning of the faceplate in relation to the central plate.
• Wire connection
  • contact buses fitted with plug-in terminals for clamping the wires
• Wire capacity
  • 0.5 – 1 mm² wire per terminal (24 – 18 AWG)
• Suitable type of wire: rigid wire
• Stripping length
  • 5 – 6 mm stripping length
• Lighting element
  • number of LEDs: 4
• Ambient temperature: 0 – 40 °C
• Dimensions (HxWxD): 71 x 73 x 28.4 mm
• Weight: 59.8 g
• Marking: CE