Motion detector, KNX®, 5 channels, 32 m, IP55, for surface mounting, white

The outdoor motion detector with five channels is suitable for KNX® systems. It can be surface mounted on walls or ceilings and is easy to install thanks to the plug-in terminals. The detector can also be used for indoor applications. In conformity with the European directive for EMC and safety EN 60669-2-1.

Finishing colour: white

Motion detector, KNX®, 5 channels, 32 m, IP55, for surface mounting, white.

• KNX motion detector for outdoor use
• Also suitable for indoor daylight control, HVAC and alarm functionalities
• Wall or ceiling mounting
• Corner mounting bracket (available as accessory)
• Easy installation with plug-in terminals
• Adjustable sensor head - right/left 90°, up 90°, down 40°
• Two sensitivity zones: frontal and below
• Pulse algorithm prevents false triggering by trees or other objects
• Master/secondary configuration
• 2 channels for on/off or dimming
• 2 channels for HVAC
• 1 channel for alarm
• Two separate light levels (orientation light level and normal light level)
• Commissioning via ETS software or IR-remote control (available as accessory)

Technical data

• Detector technology: PIR
• Input voltage: 30 Vdc via KNX®-bus
• Detector output: KNX®
• Maximum current consumption: 10 mA
• Number of channels: 5 channels
• Light intensity range: 5 lux – 2000 lux, ∞
• Switch-off delay: 5 s – 1 h, ∞
• Activation delay: 1 s
• Detection angle: 360°
• Detection range (PIR): ø 32 m from a height of 2.5 m
• Ambient temperature: -20 – +50 °C
• Mounting method: surface mounting
• Mounting height: 2 – 3 m
• Usage: for outdoor and indoor use
• Colour: white (approximately RAL 9010)
• Dimensions (HxWxD): 84 x 90 x 150 mm
• Protection degree: IP55
• Protection class: Class II device
• Marking: CE