Wireless Easywave three-channel transmitter

The wireless Easywave three-channel transmitter is suitable for flush mounting and may only be used to control wireless Easywave receivers. By using this wireless Easywave three-channel transmitter, you can expand the switching functions of existing switches or push buttons via a receiver. The three-channel transmitter checks whether a switch/push button is live and transmits the corresponding Easywave code (A, B, C or D) to the wireless Easywave receiver, which in turn switches the consumer.

Frequency band: 868.0 - 868.6MHz

Maximum power output: 3.4 dBm

Wireless Easywave three-channel transmitter

• May only be used to control wireless Easywave receivers
• Can be used to expand the switching functions of existing switches or push buttons via a receiver. The three-channel transmitter checks whether a switch/push button is live and transmits the corresponding Easywave code (A, B, C or D) to the wireless Easywave receiver, which in turn switches the consumer. The product is part of the Easywave radio frequency system, a wireless installation technique between the push buttons (control points) and the consumers to be operated. The Easywave system is a modular system with transmitters and receivers. A wall transmitter has the form of a push button with two, four or eight action buttons and can be mounted on a wall. A hand-held transmitter looks like a traditional remote control unit. One transmitter can operate an unlimited number of receivers simultaneously, while one receiver can be controlled by a maximum of 32 transmitters. The remote control or wireless control operates on the basis of signal transmission via radio waves at a frequency of 868.3 MHz. This frequency only allows products that emit signals no more than 1% per hour or 36 seconds, which reduces the risk of interrupted signals to an absolute minimum. Therefore, the wireless Easywave system is excellently suited to specific applications, such as renovations of listed interiors, extensions of existing electrical installations (where drilling or channelling is not possible), for use in offices with moveable partitions or walls or in installations where complicated wiring must be avoided.
• Marking: CE