Finishing set with lens for a single electronic switch or push button, cream
Description
Finishing set with lens for a single electronic switch or push button. Finishing colour: cream.
Specification description
Finishing set with lens for a single electronic switch or push button, cream.
- Number of control buttons: 1 control button
- Material central plate: The central plate is made of rigid PC and ABS. The base material is mass-dyed.
- Colour: cream (mass-dyed, approximately NCS S 1005 - Y10R, RAL 1013)
- Lens: 1 lens
- Protection degree: IP41 for the combination of a mechanism, central plate and faceplate
- Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact resistance of IK02
- Fire safety
- the plastic parts of the central plate are self-extinguishing (comply with a filament test of 650 °C)
- the plastic parts of the central plate are halogen-free
- Dimensions of finishing: 45 x 45 mm (HxW)
- Dimensions (HxWxD): 44.5 x 44.5 x 8.6 mm
- Marking: CE
Related products:
Smart universal push-button dimmer with RF transmitter and receiver, 3 – 200 W, 2-wire, with claw fixing
The smart dimmer is suitable for dimming resistive, inductive and capacitive loads as well as dimming dimmable halogen and LED lamps. It has a transmitter and receiver operating according to the Easywave protocol. If desired, extra controls can be added. These could be both wired push buttons and wireless controls according to the Easywave protocol. The smart dimmer is connected with a 2-wire system and does not need a neutral conductor. By doing so, it can effortlessly replace an existing single, multiway, or intermediate switching. It is highly suitable for the expansion of existing electrical installations where drilling or channelling work is not permitted or to avoid complicated cabling. The smart dimmer can not only dim its own load but can also control other dim receivers which operate according to the Easywave protocol. It can also be incorporated in a mood setting which can be activated via a wireless control. The dimmer has a feedback LED of which the operation can be set. This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.
Smart universal push-button dimmer with RF transmitter and receiver, 3 – 200 W, 2-wire, with screw fixing
The smart dimmer is suitable for dimming resistive, inductive and capacitive loads as well as dimming dimmable halogen and LED lamps. It has a transmitter and receiver operating according to the Easywave protocol. If desired, extra controls can be added. These could be both wired push buttons and wireless controls according to the Easywave protocol. The smart dimmer is connected with a 2-wire system and does not need a neutral conductor. By doing so, it can effortlessly replace an existing single, multiway, or intermediate switching. It is highly suitable for the expansion of existing electrical installations where drilling or channelling work is not permitted or to avoid complicated cabling. The smart dimmer can not only dim its own load but can also control other dim receivers which operate according to the Easywave protocol. It can also be incorporated in a mood setting which can be activated via a wireless control. The dimmer has a feedback LED of which the operation can be set. This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.
Finishing set with lens for a single electronic switch or push button, white
Finishing set with lens for a single electronic switch or push button. Finishing colour: white.
Finishing set for a single electronic switch or push button, cream
Finishing set for a single electronic switch or push button. Finishing colour: cream.
