Wireless receiver for motor control, for flush mounting
This mini receiver with switching contact (4 A/230 V AC) is used to control roll-down shutters or venetian/vertical blinds. The receiver can be operated by both wall-mounted and hand-held transmitters in a dual-button mode for the roll-down shutter functions (open, stop and close) or in a dual-button mode for the rotation of the vertical blinds. The operating time is 90 s. Thanks to its limited dimensions, it is easily flush mounted.
Product details
Flush-mounting RF receiver with roller shutter function
This mini-receiver is used to control roller shutters and blinds. It is very easy to mount due to its compact dimensions. It works with both wall-mounted and hand-held transmitters. The run time is 90 seconds. With the 2-button mode, you can:
- open, close and stop the roller shutters and blinds;
- turn the vertical blind slats.
Technical characteristics:
- max. switch current: 4 A/ 230V AC;
- dimensions: L70xW49xD29mm.
Specification description
Flush-mounting RF receiver with roller shutter function
Mini receiver for flush mounting with shutter function, controlled wirelessly via radio frequency (868.3 MHz). Max. 32 transmitters per receiver. min. reception range in a building: 30 m; in open field 100 m. Dimensions: 49 x 70 x 29 mm. Max. load: 4 A. Power supply: 230 V 50 Hz. Modulation type: FSK. In accordance with Belgian and European legislation: CE marked. This product complies with all applicable European directives and regulations. For radio equipment, Niko nv declares that it complies with Directive 2014/53/EU. May be used in all European member states. Manual is included.
- Marking: CE
Finishing set for a 1-channel flush-mounting RF receiver with single-pole (potential-free) switching contact or flush-mounting RF receiver with roller blind function
Finishing set for a 1-channel flush-mounting RF receiver with single-pole (potential-free) switching contact or for a flush-mounting RF receiver with roller blind function. Finishing colour: cream.
Related products
Wireless switch with two buttons
This wireless switch with two buttons can be used by a wireless receiver from the Easywave range. It can be used as one dual-button control (upper=on, lower=off), or as two one-button controls (toggle on/off or pulse). The switch can also be used in the Niko Home Control installation for bus wiring in combination with the USB RF interface Easywave (410-00099) for Niko Home Control or in the Niko Home Control installation for traditional wiring in combination with the wireless smart hub (552-00001).
Wireless switch with four buttons
This wireless switch with four buttons can be used by a smart switch or a wireless receiver. It can be used as a two dual-button controls (upper:on, lower off) or as four one-button controls (on/off or pulse). The switch can also be used in the Niko Home Control installation for bus wiring in combination with the USB RF interface Easywave (410-00099) for Niko Home Control or in the Niko Home Control installation for traditional wiring in combination with the wireless smart hub (552-00001).
Wireless mini hand-held transmitter with 1 channel and 1 control button
This hand-held transmitter has one control button and can be used in combination with every Niko receiver. One function can be assigned to the control button. Visual check of the control via a LED. For use in a residential environment. Battery supplied. In combination with the Niko Home Control USB RF interface (410-00099), the hand-held transmitter can also be used in Niko Home Control installations.