! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Wireless media coupler, KNX®

This wireless KNX® media coupler allows you to easily extend a KNX® system using one or more battery-free Niko dimmer switches KNX® (360-31001). The KNX® wireless media coupler is connected to and powered by the KNX® bus. It is configured via the ETS software that is available on the KNX® Association website.

Product details

This product consists of several components. Below you will find an overview of all the component parts.

Wireless media coupler, KNX®

Reference code
360-33001

This wireless KNX® media coupler allows you to easily extend a KNX® system using one or more battery-free Niko dimmer switches KNX® (360-31001). The wireless media coupler is connected to and powered by the KNX® bus. It is configured via the ETS software that is available on the KNX® Association website.

Specification description

Wireless media coupler, KNX®

  • dimensions (WxHxD): 40 x 43 x 11 mm (excl. antenna)
  • power supply: KNX bus cable, 21 to 30 V DC
  • power consumption: < 10 mA
  • RF Protocol: KNX® RF1.R S-Mode
  • modulation: Frequency-Shift Keying (FSK) / up to 16.384 kbps
  • maximum APDU length: 201 bytes
  • temperature (operating / storage): -5 up to +45 °C / -10 up to +70 °C
  • bandwidth: 600 kHz
  • antenna: External antenna
  • maximum range (indoor from switch to receiver): up to 30 m
  • maximum RF power: +10 dBm / 10 mW
  • Communication protocol: KNX®-RF
  • Maximum radio frequency power: 868.3 dBm
  • Ambient temperature: -5 – +45 °C
  • Protection degree: IP20
  • Weight: 15 g
  • Marking: CE

Related products

Wireless switch with four buttons

This wireless switch with four buttons can be used by a smart switch or a wireless receiver. It can be used as a two dual-button controls (upper:on, lower off) or as four one-button controls (on/off or pulse). The switch can also be used in the Niko Home Control installation for bus wiring in combination with the USB RF interface Easywave (410-00099) for Niko Home Control or in the Niko Home Control installation for traditional wiring in combination with the wireless smart hub (552-00001).

Wireless hand-held transmitter with 4 channels and 13 control buttons

With this hand-held transmitter, you control a maximum of 52 circuits, independent of one another, but dependent on the receiver settings. You use the hand-held transmitter for 1-key, 2-key and 4-key functions. The operation status and channel selection is indicated with LEDs. This hand-held transmitter cannot be used in Niko Home Control installations.

Wireless two-channel transmitter with Easywave protocol

The wireless two-channel transmitter is suitable for flush mounting and may only be used to control wireless receivers. By using this two-channel transmitter, you can expand the switching function of existing switches or push buttons via a receiver. The two-channel transmitter checks whether a switch/push button is live and transmits the corresponding code (A, B, C or D) to the wireless receiver, which in turn switches the consumer. This wirelesss two-channel transmitter cannot be used in Niko Home Control installations.

Favorites ( 0 )