! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Niko dimmer switch, EnOcean®

With this wireless and battery-free dimmer switch in Niko design, you can remotely operate EnOcean® certified wireless receivers (e.g. presence detectors with EnOcean® interface). No wall breaking or cable installation is needed. The pairing procedure with a wireless receiver determines the function of each button. Up to four buttons can be configured. The dimmer switch can be mounted in a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included).

Product details

This product consists of several components. Below you will find an overview of all the component parts.

Niko dimmer switch, EnOcean®

Reference code
360-11001

With this wireless and battery-free dimmer switch in Niko design, you can remotely operate EnOcean® certified 868 MHz wireless receivers. Examples are Niko presence detectors with an EnOcean® interface (350-41680, 350-41780, 350-41781). No wall breaking or cable installation is needed. For best performance, follow the installation and radio planning guidelines. The pairing procedure with a wireless receiver determines the function of each button. Up to four buttons can be configured. The dimmer switch can be mounted in a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included). The central plate and the faceplate must be ordered separately. The dimmer switch combines with any Niko Pure, Niko Intense and Niko Original faceplate in the colour of your choice.

Specification description

Niko dimmer switch, EnOcean®.

  • Dimensions (HxWxD): 83 x 83 x 15 mm
  • Power supply: integrated kinetic energy Harvester
  • Modulation: Amplitude-shift keying (ASK)
  • Data rate: 125 kbps
  • Configuration: Special Button Combinations (SBC) NFC forum type 2 tag
  • Mounting height: 110 cm
  • Maximum range (indoor): up to 30 m
  • Antenna: integrated antenna
  • Protection degree: IP20
  • Number of control buttons: The base of the fourfold potential-free push button is made of polycarbonate. In addition to the 4 control buttons (upper left and right and lower left and right), the mechanism is equipped in the middle on the front with snap hooks which hold the two keys and a finishing plate (with or without text field) in place.
  • Communication protocol: EnOcean®
  • Maximum radio frequency power: 5 dBm
  • Operating frequency: 0.8683 GHz
  • Fixing method

screw fixing or gluing

  • Ambient temperature: -25 – +65 °C
  • Weight: 25 g
  • Marking: CE

Base for a wireless dimmer switch, 60 x 71 mm, claw fixing

Reference code
360-00000

Base with claw fixing for mounting a wireless dimmer switch (for Hue system, EnOcean®, Bluetooth® and KNX®). You can click it together and combine it with one or more flush-mounting mechanisms from Niko.

This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

Base for a wireless dimmer switch, 60 x 71 mm, screw fixing

Reference code
360-00001

Base with screw fixing for mounting a wireless dimmer switch (for Hue system, EnOcean®, Bluetooth® and KNX®). You can click it together and combine it with one or more flush-mounting mechanisms from Niko.

This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

Base for a wireless dimmer switch, 71 x 71 mm, claw fixing

Reference code
360-00002

Base with claw fixing for mounting a wireless dimmer switch (for Hue system, EnOcean®, Bluetooth® and KNX®). You can click it together and combine it with one or more flush-mounting mechanisms from Niko.

This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

Base for a wireless dimmer switch, 71 x 71 mm, screw fixing

Reference code
360-00003

Base with screw fixing for mounting a wireless dimmer switch (for Hue system, EnOcean®, Bluetooth® and KNX®). You can click it together and combine it with one or more flush-mounting mechanisms from Niko.

This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

Double key, for wireless dimmer switch (Hue®, Bluetooth®, EnOcean®, KNX®), cream

Reference code
100-00060

This double key with two control buttons can be used for the wireless Niko dimmer switch for Hue system, EnOcean®, Bluetooth® and KNX®.

Conveniently control various lighting points.

  • 100-00060
    Colour cream
    Reference code 100-00060
  • 101-00060
    Colour white
    Reference code 101-00060
  • 102-00060
    Colour light grey
    Reference code 102-00060
  • 121-00060
    Colour sterling coated
    Reference code 121-00060
  • 122-00060
    Colour anthracite coated
    Reference code 122-00060
  • 123-00060
    Colour bronze coated
    Reference code 123-00060
  • 124-00060
    Colour dark brown coated
    Reference code 124-00060
  • 154-00060
    Colour white coated
    Reference code 154-00060
  • 157-00060
    Colour champagne coated
    Reference code 157-00060
  • 161-00060
    Colour black coated
    Reference code 161-00060
  • 200-00060
    Colour piano black coated
    Reference code 200-00060
  • 220-00060
    Colour blue grey coated
    Reference code 220-00060
  • 221-00060
    Colour gold coated
    Reference code 221-00060

Related products

Wireless battery-powered switch, 1-fold, Zigbee®

This onefold wireless battery-powered Zigbee® switch allows you to remotely control wireless Zigbee® devices. It can either be used in your Niko Home Control installation or connected to a third-party Zigbee® network as a standard dimmer switch via Find&Bind pairing. Moreover, the switch can be paired with up to eight Zigbee® receivers for stand-alone use via Touchlink. It is battery-powered with a lifetime of at least five years, based on twenty short-press actuations a day. The wireless Zigbee® switch is mounted on a plastic base. The set (base + switch 552-72001) can be screwed on a wall (screws excluded) or glued to a flat surface with double-sided adhesive tape (included). If you want to install the onefold wireless battery-powered Zigbee® on a flush-mounting box, order the variant without plastic baseplate (552-72011). Combine it with a metal baseplate (552-720X0) instead. The wireless battery-powered switch can be connected wirelessly to the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640).

Wireless battery-powered switch, 2-fold, Zigbee®

This twofold wireless battery-powered Zigbee® switch allows you to remotely control wireless Zigbee® devices. It can either be used in your Niko Home Control installation or connected to a third-party Zigbee® network as a standard dimmer switch via Find&Bind pairing. Moreover, the switch can be paired with up to eight Zigbee® receivers for stand-alone use via Touchlink. It is battery-powered with a lifetime of at least five years, based on twenty short-press actuations a day. The wireless Zigbee® switch is mounted on a plastic base. The set (base + switch 552-72002) can be screwed on a wall (screws excluded) or glued to a flat surface with double-sided adhesive tape (included). If you want to install the twofold wireless battery-powered Zigbee® on a flush-mounting box, order the variant without plastic baseplate (552-72012). Combine it with a metal baseplate (552-720X0) instead. The wireless battery-powered switch can be connected wirelessly to the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640).

Wireless battery-powered switch, fourfold, Zigbee®

This fourfold wireless battery-powered Zigbee® switch allows you to remotely control wireless Zigbee® devices. It can either be used in your Niko Home Control installation or connected to a third-party Zigbee® network as a standard dimmer switch via Find&Bind pairing. Moreover, the switch can be paired with up to eight Zigbee® receivers for stand-alone use via Touchlink. It is battery-powered with a lifetime of at least five years, based on twenty short-press actuations a day. The wireless Zigbee® switch is mounted on a plastic base. The set (base + switch 552-72004) can be screwed on a wall (screws excluded) or glued to a flat surface with double-sided adhesive tape (included). If you want to install the fourfold wireless battery-powered Zigbee® on a flush-mounting box, order the variant without plastic baseplate (552-72014). Combine it with a metal baseplate (552-720X0) instead. The wireless battery-powered switch can be connected wirelessly to the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640).

Favorites ( 0 )