DIN-rail module with RJ45 connector, PoE++ ready

This product is a replacement product. As long as the old product is still in stock, this product will be delivered instead of the new product.

This DIN-rail module with unshielded RJ45 connector UTP Cat. 5E, PoE++ ready is used for the central mounting of an RJ connection point in the connection cabinet.

This connection point is used to make a network connection with 1 device for telephone, Ethernet, IP, PoE or internet applications.

The DIN connector is connected in a star configuration to the mechanism using a cable of the same performance type.

This provides a central overview of all connection points throughout the entire residence. A PoE adapter is required to transport both data and power via the connector. A PoE adapter can be both a PoE injector or a PoE splitter. A finishing set in the colour of your choice must be ordered separately.

DIN-rail module with unshielded RJ45 connector UTP Cat. 5E, PoE++ ready, for the central mounting of an RJ connection point in the connection cabinet

• Service: 4PPoE
• PoE standard: IEEE 802.3BT Type 4
• Maximum power Component (at PD): 72 W
• Maximum power Source (at PSE): 100 W
• Voltage range (at PSE): 50.0-57.0 V
• Voltage range (at PD): 42.5-57 V
• Maximum current: 860 mA
• Pairs with current: 4
• Maximum cable resistance per pair set: 12.5 Ω
• Power management: Three power class levels negotiated by signature or 0.1 W steps negotiated by LLDP
• Derating of maximum cable ambient operating temperature: 10 °C (20 °F) with more than half of bundled cables at Imax
• Supported cabling: Category 5
• Supported modes: Mode A, Mode B, 4-pair mode
• Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
• Marking: CE

This DIN-rail module with shielded RJ45 connector STP Cat. 5E, PoE++ ready is used for the central mounting of an RJ connection point in the connection cabinet.

This connection point is used to make a network connection with 1 device for telephone, Ethernet, IP, PoE or internet applications.

The shielding ensures a more malfunction-resistant connection.

The DIN connector is connected in a star configuration to the mechanism using a cable of the same performance type.

This provides a central overview of all connection points throughout the entire residence. A PoE adapter is required to transport both data and power via the connector. A PoE adapter can be both a PoE injector or a PoE splitter. A finishing set in the colour of your choice must be ordered separately.

DIN-rail module with shielded RJ45 connector STP Cat. 5E, PoE++ ready, for the central mounting of an RJ connection point in the connection cabinet

• Service: 4PPoE
• PoE standard: IEEE 802.3BT Type 4
• Maximum power Component (at PD): 72 W
• Maximum power Source (at PSE): 100 W
• Voltage range (at PSE): 50.0-57.0 V
• Voltage range (at PD): 42.5-57 V
• Maximum current: 860 mA
• Pairs with current: 4
• Maximum cable resistance per pair set: 12.5 Ω
• Power management: Three power class levels negotiated by signature or 0.1 W steps negotiated by LLDP
• Derating of maximum cable ambient operating temperature: 10 °C (20 °F) with more than half of bundled cables at Imax
• Supported cabling: Category 5
• Supported modes: Mode A, Mode B, 4-pair mode
• Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
• Marking: CE

This DIN-rail module with unshielded RJ45 connector UTP Cat. 6, PoE++ ready is used to centrally mount an RJ connection point in the connection cabinet. This connection point is used to make a network connection with 1 device for telephone, Ethernet, IP, PoE or internet applications. The DIN connector is connected in a star configuration to the mechanism using a cable of the same performance type. This provides a central overview of all connection points throughout the entire residence. A PoE adapter is required to transport both data and power via the connector. A PoE adapter can be both a PoE injector or a PoE splitter. A finishing set in the colour of your choice must be ordered separately.

DIN-rail module with unshielded RJ45 connector UTP Cat. 6, PoE++ ready, for the central mounting of an RJ connection point in the connection cabinet

• Service: 4PPoE
• PoE standard: IEEE 802.3BT Type 4
• Maximum power Component (at PD): 72 W
• Maximum power Source (at PSE): 100 W
• Voltage range (at PSE): 50.0-57.0 V
• Voltage range (at PD): 42.5-57 V
• Maximum current: 860 mA
• Pairs with current: 4
• Maximum cable resistance per pair set: 12.5 Ω
• Power management: Three power class levels negotiated by signature or 0.1 W steps negotiated by LLDP
• Derating of maximum cable ambient operating temperature: 10 °C (20 °F) with more than half of bundled cables at Imax
• Supported cabling: Category 5
• Supported modes: Mode A, Mode B, 4-pair mode
• Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
• Marking: CE

This DIN-rail module with shielded RJ45 connector STP Cat. 6, PoE++ ready is used to centrally mount an RJ connection point in the connection cabinet. This connection point is used to make a network connection with 1 device for telephone, Ethernet, IP, PoE or internet applications. Due to its high quality, this type also offers the possibility to transmit TV distribution signals for analogue, digital and interactive TV images. The DIN connector is connected in a star configuration to the mechanism using a cable of the same performance type. This provides a central overview of all connection points throughout the entire residence. A PoE adapter is required to transport both data and power via the connector. A PoE adapter can be both a PoE injector or a PoE splitter. A finishing set in the colour of your choice must be ordered separately.

DIN-rail module with shielded RJ45 connector STP Cat. 6, PoE++ ready, for the central mounting of an RJ connection point in the connection cabinet

• Service: 4PPoE
• PoE standard: IEEE 802.3BT Type 4
• Maximum power Component (at PD): 72 W
• Maximum power Source (at PSE): 100 W
• Voltage range (at PSE): 50.0-57.0 V
• Voltage range (at PD): 42.5-57 V
• Maximum current: 860 mA
• Pairs with current: 4
• Maximum cable resistance per pair set: 12.5 Ω
• Power management: Three power class levels negotiated by signature or 0.1 W steps negotiated by LLDP
• Derating of maximum cable ambient operating temperature: 10 °C (20 °F) with more than half of bundled cables at Imax
• Supported cabling: Category 5
• Supported modes: Mode A, Mode B, 4-pair mode
• Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
• Marking: CE

This product is a replacement product. As long as the old product is still in stock, this product will be delivered instead of the new product.

This DIN-rail module with unshielded RJ45 connector UTP Cat. 6A, PoE++ ready is used to centrally mount an RJ connection point in the connection cabinet. This connection point is used to make a network connection with 1 device for telephone, Ethernet, IP, PoE or internet applications. The DIN connector is connected in a star configuration to the mechanism using a cable of the same performance type. This provides a central overview of all connection points throughout the entire residence. A PoE adapter is required to transport both data and power via the connector. A PoE adapter can be both a PoE injector or a PoE splitter. A finishing set in the colour of your choice must be ordered separately.

DIN-rail module with unshielded RJ45 connector UTP Cat. 6A, PoE++ ready, for the central mounting of an RJ connection point in the connection cabinet

• Service: 4PPoE
• PoE standard: IEEE 802.3BT Type 4
• Maximum power Component (at PD): 72 W
• Maximum power Source (at PSE): 100 W
• Voltage range (at PSE): 50.0-57.0 V
• Voltage range (at PD): 42.5-57 V
• Maximum current: 860 mA
• Pairs with current: 4
• Maximum cable resistance per pair set: 12.5 Ω
• Power management: Three power class levels negotiated by signature or 0.1 W steps negotiated by LLDP
• Derating of maximum cable ambient operating temperature: 10 °C (20 °F) with more than half of bundled cables at Imax
• Supported cabling: Category 5
• Supported modes: Mode A, Mode B, 4-pair mode
• Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
• Marking: CE

This DIN-rail module with shielded RJ45 connector STP Cat. 6A, PoE++ ready is used to centrally mount an RJ connection point in the connection cabinet. This connection point is used to make a network connection with 1 device for telephone, Ethernet, IP, PoE or internet applications. Due to its high quality, this type also offers the possibility to transmit TV distribution signals for analogue, digital and interactive TV images. The DIN connector is connected in a star configuration to the mechanism using a cable of the same performance type. This provides a central overview of all connection points throughout the entire residence. A PoE adapter is required to transport both data and power via the connector. A PoE adapter can be both a PoE injector or a PoE splitter. A finishing set in the colour of your choice must be ordered separately.

DIN-rail module with shielded RJ45 connector STP Cat. 6A, PoE++ ready, for the central mounting of an RJ connection point in the connection cabinet

• Service: 4PPoE
• PoE standard: IEEE 802.3BT Type 4
• Maximum power Component (at PD): 72 W
• Maximum power Source (at PSE): 100 W
• Voltage range (at PSE): 50.0-57.0 V
• Voltage range (at PD): 42.5-57 V
• Maximum current: 860 mA
• Pairs with current: 4
• Maximum cable resistance per pair set: 12.5 Ω
• Power management: Three power class levels negotiated by signature or 0.1 W steps negotiated by LLDP
• Derating of maximum cable ambient operating temperature: 10 °C (20 °F) with more than half of bundled cables at Imax
• Supported cabling: Category 5
• Supported modes: Mode A, Mode B, 4-pair mode
• Protection degree: IP41 for the combination of a mechanism, central plate and faceplate
• Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
• Marking: CE