The Niko Hydro products are not suitable for use in ammonia rich environments (e.g. pig houses).
Splashproof bike charging station 16 A/250 Vac with pin earthing, safety shutters and with plug-in terminals, excluding box, black. Protection lid: Each socket outlet is covered entirely by a hinged protection cap which opens upward. A spring and a hook-fastener keep the protection cap tightly closed. The socket outlet is provided with contact buses with a large contact surface that do not rest on the base in order to clasp. The sockets are equipped with plug-in terminals with a release for clamping the wires. The releases can be controlled from the front side by hand or with a screwdriver. All connection terminals are located at the top of the end socket and can contain up to 4 x 2.5 mm² of wire. The earthing terminal even up to 2 x 2.5 mm² + 2 x 4 mm². The stripping length (14 mm) of the wires is indelibly imprinted on the back of the base. The function is designed to be mounted in a splashproof, surface-mounting box. The function has an integral closure and is hermetically sealed onto the appropriate box.
Cable space: Two laterally positioned holders inside the outlet hold the mechanism in place. A snap connector holds the wired mechanism in place. There is 15.7 mm of wiring space remaining under the mechanism. The cover has an integral closure and is hermetically sealed onto the appropriate box. The box is made of impact-resistant, dust-preventing, halogen-free and self-extinguishing polypropylene (UL94-V2/1.6 mm). The protection cap is made of rigid ABS. The socket outlet has a solid brass nickel-plated earth pin (pin earthing).
- Number of mechanisms: 1
- Protection degree: The combination of a switch and a flush-mounting box has a protection degree of IP55.
- Impact resistance: After mounting, an impact-resistance of IK07 is guaranteed.
- Colour: The base material is coloured in mass, black (RAL 9005).
- Certification marks: CEBEC, NF
- Marking: CE