! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Splashproof two-way switch 10 AX/250 Vac with plug-in terminals, white

Reference code
701-31605
Technical datasheets
Certificaten CE-Marking

Description

This two-way switch is equipped with plug-in terminals and is to be mounted in a splashproof mounting box. The entire unit is splashproof which makes it extremely well-suited for use in damp areas and in demanding environments. Colour combination: white.

Specification description

Splashproof two-way switch 10 AX/250 Vac with plug-in terminals, white.

  • Sealing: The cover has an integral closure and is hermetically sealed onto the appropriate box.
  • Number of mechanisms: 1
  • Material base
    • ureumformaldehyde (UF) with high heat resistance
    • white RAL9010 (approximately)
  • Material finishing: The switch/push button is made of impact-resistant, dust-resistant, halogen-free and self-extinguishing polypropylene (UL94-V2/1.6 mm). The control button is made of rigid ABS.
  • Wire connection
    • contact buses fitted with plug-in terminals for clamping the wires
    • manual release or release with a screwdriver from the front side
  • Wire capacity
    • up to 2 x 2.5 mm² wire per terminal
  • Cable space
    • 21.9 mm wiring space under the mechanism
    • mechanism is held by 2 laterally positioned holders in the box
    • a snap connector holds the wired mechanism in place
  • Stripping length
    • 12 mm stripping length
    • indelibly indicated at the rear side: stripping length and wiring diagram
    • indelibly indicated at the front side: terminals and switch symbol
  • Lighting element
    • provided with 2 rectangular recesses for a lighting unit
    • left recess (front view): a lighting unit with wires or an automatic lighting unit can be clicked in
    • rear side: round recesses for direct contact of the automatic lighting unit with the mechanism
  • Surface-mounting box: The function is designed to be mounted in a splashproof mounting box. The function has an integral closure and is hermetically sealed onto the appropriate box (to be ordered separately).
  • Ambient temperature: -25 – +55 °C
  • Protection degree: IP55 for the combination of a mechanism and flush-mounting box
  • Impact resistance: The combination of a Hydro mechanism and a flush- or surface-mounting box has an impact resistance of IK07 with a minimum temperature of -25 °C and a maximum temperature of 55 °C
  • Colour: The base material is coloured in mass, white (RAL 9010).
  • Certification marks: CEBEC, ÖVE, KEMA, NF
  • Marking: CE

Select a product below to view related articles, variants or accessories:

Favorites ( 0 )