! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Splashproof, non-illuminable double push button 10 A/250 Vac with 2 N.O. or N.C. contacts, with plug-in terminals, grey

Reference code
700-35005

Description

This non-illuminable double push button is equipped with two keys and two normally open (N.O.) or normally closed (N.C.) contacts. It is designed to be mounted in a splashproof mounting box. The entire unit is splashproof which makes it extremely well-suited for use in damp areas and in demanding environments. Colour combination: light grey with dark grey button.

Specification description

Splashproof, non-illuminable double push button 10 A/250 Vac with 2 N.O. or N.C. contacts, with plug-in terminals, grey.

  • Maximum MCB rating: 16 A (limited by national installation rules)
  • Colour: The switch is light grey (coloured in mass, approximately NCS S 1502 - B, RAL 7035) and the control button is dark grey (coloured in mass, approximately NCS S 3502 - B)
  • Sealing: The cover has an integral closure and is hermetically sealed onto the appropriate box.
  • Number of mechanisms: 1
  • Material base
    • ureumformaldehyde (UF) with high heat resistance
    • white RAL9010 (approximately)
  • Material finishing: The switch/push button is made of impact-resistant, dust-resistant, halogen-free and self-extinguishing polypropylene (UL94-V2/1.6 mm). The control button is made of rigid ABS.
  • Wire connection
    • contact buses fitted with plug-in terminals for clamping the wires
    • manual release or release with a screwdriver from the front side
  • Wire capacity
    • all connection terminals at the top side of the base
    • up to 2 x 2.5 mm² wire per terminal
  • Cable space
    • 21.9 mm wiring space under the mechanism
    • mechanism is held by 2 laterally positioned holders in the box
    • a snap connector holds the wired mechanism in place
  • Stripping length
    • 12 mm stripping length
    • indelibly indicated at the rear side: stripping length and wiring diagram
    • indelibly indicated at the front side: terminals and switch symbol
  • Lighting element
    • the base is provided with 2 rectangular recesses for lighting units
    • left and right recess: lighting units with wires can be clicked in
  • Surface-mounting box: The function is designed to be mounted in a splashproof mounting box. The function has an integral closure and is hermetically sealed onto the appropriate box (to be ordered separately).
  • Chemical resistance: ammonia-rich environments may cause faster ageing of the base
  • Ambient temperature: -25 – +55 °C
  • Protection degree: IP55 for the combination of a function and a splashproof mounting box
  • Impact resistance: The combination of a Hydro mechanism and a flush- or surface-mounting box has an impact resistance of IK07 with a minimum temperature of -25 °C and a maximum temperature of 55 °C
  • Certification marks: CEBEC, DEMKO, NF, VDE, ÖVE, SEMKO, KEMA
  • Marking: CE

Select a product below to view related articles, variants or accessories:

Favorites ( 0 )