Universal dimmer 3680 VA (16 A)

This universal dimmer 3680 VA can be used for incandescent lamps, 230 V halogen lamps and all types of low-voltage halogen lamps. You control the dimmer with a push button, 0 – 10 V voltage control, 1 –10V current control or directly with the device. The dimmer can be used with or without the memory function. LEDs indicate operation status and error diagnoses.

Universal dimmer 3680 VA (16 A).

• Function: Universal dimmer for adjusting all dimmable light sources: resistive, inductive and capacitive. All combinations (R,L,C) are permitted. For inductive loads the maximum load should be reduced by the cosinus phi. Protection from overvoltage, overcurrent, short-circuit and overheating with reactivation and LED indicators. Wide range of control options: contact, analogue 0/10 V or current control 1/10 V. Minimum level programmable between 0 and 30 %. Maximum level programmable between 50% and 100%. Local operation with priority function. Individual temperature measurement on each cooling extrusion. The dimmers are intended for flush-mounting in a plate. The temperature in the plate should not exceed 35 °C. Click-in control interface for service. Software programmable "in current". Extensive assistance for the user and installer: voltage, current, temperature and protection status readings on the front plate Complies with the European standards EN 60669-2-1, EN 60929 and EN 55015.
• Minimum load: 100 W/100/ VA
• Maximum load electronic transformer: 3680 VA
• Maximum load ferromagnetic transformer: 3680 VA
• Maximum load toroidal core transformer: 3680 VA
• PLC interference suppression: this dimmer is equipped with interference suppression of PLC signals (frequency dips up to 3 Hz). This integrated interference suppression attempts to remove as many interfering signals as possible from the mains in order for most lamps to function optimally, without flashing or humming.
• Protection from overload: thermal overload protection with automatic reset function
• Short circuit proof: electronic short-circuit protection
• Capacity reduction: at an ambient temperature above 35°C the maximum load will gradually decrease (see technical manual)
• Input voltage: 230 Vac ± 10 %, 50 Hz
• Connection terminals: 4 connection terminals on top and 6 connection terminals underneath
• Marking: CE