! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Connected dimmer, 3 – 200 W, 2-wire, 60 x 71 mm, screw fixing

Reference code
551-72221

Description

The connected dimmer contains a dimmer contact to control the lighting. It contains a transmitter and receiver that communicate wirelessly with the wireless smart hub for Niko Home Control.

You can use the connected dimmer to replace a conventional switch. It is equipped with an extension terminal so that, in combination with a conventional push button, it can easily replace multiway or intermediate switching. The connected dimmer can switch its own contact.

With the addition of the wireless smart hub for Niko Home Control, it is possible to configure additional functionalities with the Niko Home Control programming software. For example, it becomes possible to add it to a mood or all-off function.

It is possible to disconnect the control from its built-in contact. That way, you have complete flexibility to configure the switching contact and the controls separately via the programming software.

Specification description

Connected dimmer, 3 – 200 W, 2-wire, 60 x 71 mm, screw fixing. When fixing in a flush-mounting box screws should be used. At the right and left sides, the flush-mounting frame is equipped with folded-up dovetails, allowing for a quick and perfect horizontal coupling of several switches. The folded-up edges on the outside of the base and their continuation to the inside ensure additional robustness. The bases can be coupled vertically with a centre-to-centre distance of 60 x 71 mm by sliding them into each other. They automatically lock into place. For horizontal coupling of bases with a centre-to-centre distance of 71 mm, the base is equipped with two pre-formed lips at the bottom. By folding these lips down over a length of 1 mm, this rests perfectly on the one below and the centre-to-centre distance of 71 mm is guaranteed.

  • Power supply: 230 Vac (L- + N-wire required)
  • Protocol: proprietary
  • Mounting method: wall mounting
  • Mounting height: 110 - 120 cm
  • Modification of settings: Niko Home Control programming software (requires smart hub 552-00001)
  • Maximum range (from switch to smart hub): 30 m
  • Operating frequency: 869,05 Mhz
  • Maximum frequency power: 6 dBm
  • Wire capacity: All connection terminals can contain up to 2 x 2.5 mm² of wire.
  • Minimum load: 3 W
  • Maximum load bulb: 200 W
  • Protection degree: IP20
  • Flush-mounting depth: 40 mm
  • Dimensions (HxWxD): 73 x 73 x 40 mm
  • Marking: CE

Select a product below to view related articles, variants or accessories:

Favorites ( 0 )