Motion detector M34HC, KNX®, 5 channels, 15-20 m, for high ceilings, for flush-mounting box, black

This motion detector for high ceiling with 5 channels is suitable for KNX® systems. It can be installed in a flush-mounting box. Spring clips for flush-mounting and a surface-mounting box can be ordered separately. In conformity with the European directive for EMC and safety EN 60669-2-1.

Finishing colour: black

Compatible secondary detectors: 350-34014

Motion detector M34HC, KNX®, 5 channels, 15-20 m, for high ceilings, for flush-mounting box, black.

5 channels for various applications, detection angle 360°, tangential detection range 20 m at 10 m height, radial detection range 12 m at 10 m height,

• Input voltage: 30 Vdc via KNX®-bus
• Detector output: KNX®
• Maximum power consumption: 0.3 W
• Maximum current consumption: 10 mA
• Number of channels: 5 channels: channel 1-3 for adjustable control, channel 4 for HVAC and channel 5 for light measurement
• Light intensity range: 10 lux – 2000 lux
• Switch-off delay: 1 s – 18 h 12 min 15 s
• Detection angle: 360°
• Detection range (PIR): ø 20 m from a height of 10 m
• Ambient temperature: -20 – +50 °C
• Mounting method: flush-mounting box
• Drill diameter: 56 mm
• Mounting height: 4 – 10 m
• Usage: for indoor use only
• Colour: black (approximately RAL 9011)
• Dimensions (HxWxD): 102 x 102 x 51 mm
• Dimensions visible (HxWxD): 102 x 102 x 33 mm
• Modification of settings: ETS software
• Protection degree: IP20
• Impact resistance: IK02
• Marking: CE
• Certification marks: SundaHus, Byggvarubedömningen